Categories

Best Grooving And Face Milling Inserts

GBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

Accusize Industrial Tools 2.5'' by 0.75'' Bore, 75 Degree Indexable Face Mills with 4 Pcs Apkt1604 Carbide Inserts, 0028-2601

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 2-1/2 inch, Number of Inserts: 4, Cutter Dia.: 2.5.
Check Stock

THINBIT LGS12R 1/2 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin..
  • This toolholder is compatible with grooving, face grooving, threading and parting inserts..
Check Stock

THINBIT LGS58R 5/8 inch, Right Hand Orientation, Straight toolholder. Use with Grooving, face Grooving, Threading and Parting Inserts.

  • See Downloads section below item photos for detailed product information, technical information and compatible inserts..
  • Designed for CNC, Swiss and conventional machines. Toolholder includes: X Clamp, S3808 Screw, W1005 Wrench and P0206 Pin..
  • This toolholder is compatible with grooving, face grooving, threading and parting inserts..
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 1-1/2” Dia 2+2 Carbide Inserts Slab Flattening Router bit Cutter Planing Bit Woodworking Milling Cutter

  • SIZE: The wood router bit shank 12.7mm（1/2"）.
  • Carbide Inserts: above part 14*14*2 mm(≈ 5/9*5/9*2/25"), 2+2 Insert Design.
  • Professional Spoilboard Surfacing Router Bit,not only can it be used for wood slab flattening.It can also be used for slotting/grooving..
  • UPGRADE:Compared with ordinary milling cutters, this cutter can be replaced with carbide insert.This is more suitable for professional woodworkers..
  • Surface bit cutting applications of Industrial Spoilboard, Rabbeting, Flycutter, Leveler, Surface Planer and Bed Insert Router include spoilboard, large surface planing and trapping on MDF, Balsa Core, hardwood, softwood and all artificial materials.
  • This professional 2+2 wood milling cutter 1/2" Shank Has better bottom clearing effect,finer surface finish and better clearance for 90° angles..
Check Stock

ISCAR DGR2202C-6D IC328 Carbide Parting Inserts Cutter Tools Cutting Holder Grooving Inserts CNC

  • A thin PVD coated TiCN layer on a tough substrate, for milling, parting, and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions.
  • Grade or Coating Type: PVD / Coating Layers: TiCN.
  • ISO Range - P/M/K(P25-P40)(M30-M40) / ISO Range - N/S/H (S20-S30).
  • Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.
Check Stock

ApplianPar R8 FMB22 Shank Face Mill Arbor and 400R 50MM CNC End Milling Shell Cut with 4Pcs APMT1604 Carbide Inserts and T15 Wrench

  • Reference models-- Arbor model: R8-FMB22, Milling Cutter Model: 400R-50-22-4F Carbide Inserts: APMT1604.
  • Made of alloy steel with high hardness and strength to ensure long service life.
  • For shoulder milling, face milling and slotting.
  • Package includes: 1 x R8 FMB22 Arbor, 1 x 400R 50mm cut, 4 x APMT1604 Carbide Inserts, 1 x T15 Wrench.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

GBJ 10pcs MGMN200-G/2mm Black Carbide Grooving Inserts 2mm Wide Grooving Carbide Inserts Lathe Cutter for MGEHR/MGIVR Lathe Grooving Cut-Off Tool

  • Model : MGMN200-G, MGMN300-M, MGMN400-M ,grooving width: 3mm.
  • Type: Grooving cut-off inserts, used on MGEHR/MGIVR grooving cutting tool.
  • PVD Coating：Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
  • Package: 10pcs (Boxed) MGMN200-G Grooving Cut-off inserts.
Check Stock

Accusize Industrial Tools 3'' by 1'' 90 Deg. Square Shoulder Indexable Face Mill with 17 Pcs Apkt1604 Inserts, 4508-0018b+0056-1604

  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock