Best Grooving Bending Machine
OSCARBIDE 1/2\Indexable Grooving Parting Holder QA08R-20 Heavy Duty Nickel Plated Right -Hand Lathe Cut Off Tool with Carbide Insert GTN-2, 1 Piece
- Size:Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
- GTN-2 insert stop assures accuracy of center height and precise depth of cut.
- Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
- Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
- For external parting & grooving, profile/copy turning.
Check StockOSCARBIDE 1/2\ Indexable Lathe Grooving Parting Holder with 10 Pieces GTN-2(QC1402) Heavy Duty Nickel Plated QA08R-20 Right -Hand Cut Off Tool Carbide Inserts
- Size:Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
- GTN-2 insert stop assures accuracy of center height and precise depth of cut.
- Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
- Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
- For external parting & grooving, profile/copy turning.
Check StockOSCARBIDE 3/8\x1/2\Indexable Grooving Parting Holder Nickel Plated Heavy Duty QA06R-20J Right -Hand Lathe Cut Off Tool with GTN-2 Carbide Insert, 1pcs
- Size:Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
- GTN-2 insert stop assures accuracy of center height and precise depth of cut.
- Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
- Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
- For external parting & grooving, profile/copy turning.
Check StockOSCARBIDE 3/8\x1/2\ Indexable Lathe Parting Grooving Holder with 10 Pieces GTN-2(QC1402) Carbide Inserts Heavy Duty Nickel Plated QA06R-20J Right -Hand Cut Off Tool
- Size:Shank Size (B x H): 1/2"X3/8: Overall Length (L):3.5".
- GTN-2 insert stop assures accuracy of center height and precise depth of cut.
- Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
- Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
- For external parting & grooving, profile/copy turning.
Check StockVEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel
- 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
- 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
- Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
- Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check StockVEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod
- 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
- 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
- Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
- Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check StockGBJ 10pcs MGMN200-G/2mm Black Carbide Grooving Inserts 2mm Wide Grooving Carbide Inserts Lathe Cutter for MGEHR/MGIVR Lathe Grooving Cut-Off Tool
- Model : MGMN200-G, MGMN300-M, MGMN400-M ,grooving width: 3mm.
- Type: Grooving cut-off inserts, used on MGEHR/MGIVR grooving cutting tool.
- PVD Coating:Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
- Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
- Package: 10pcs (Boxed) MGMN200-G Grooving Cut-off inserts.
Check StockVEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod
- Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
- 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
- Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
- Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check StockVEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod
- Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
- 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
- Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
- Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock800W Compact Wood Router Tool, Portable Handheld Palm Router Woodworking,Electric Trimmer Wood Router with 15pcs Router Bits,Wood Laminate Router for Woodworking Handicraft and DIY
- ...cessed part of the wood easier and avoid the trouble of wood chips at the same time. The portable body makes it easy to use, store and move..
- ✔️ 15pcs Milling Cutters:15-piece set with precisely machined sharp tungsten carbide blades for edging, trimming, texturing and grooving of solid wood, medium density fiberboard, particleboard, plywood, etc.The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects..
- ✔️ High-Quality and High Efficiency: The woodworking trimming machine is made of high-quality aluminum + plastic. it uses copper motor, which is strong power, low heat. The power of the motor is 800W and the speed is 3000rpm..
- ✔️ Wide Use: This electric trimmer is widely used in wood processing, cabinet processing, handicraft production, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planning wood edge, pattern processing operations activities and DIY. Easy to wood trimming, grooving..
Check StockSpoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY
- QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
- DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
- DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
- SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
- SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check StockFomaSP SPB2-26 26mm High Tool Holder for Grooving Adjustable Blades for GTN-2(SP200) Inserts, 1 PCS
- Application External Grooving Parting off, fit for all CNC lathes and manual lathes, good at grooves, parting off..
- Easy removal of grooving inserts with user..
- Boring bar with high speed steel shank, strong shock resistance, thermal cracking and resistance to deformation.
Check StockVAN ALSTINE G-1000, TIRE GROOVER, GROOVING IRON, W/BLADES, SOUTHWEST SPEED INC
- Brand New Deluxe Van Alstine Tire Grooving Kit (Part # G-1000) | * The G-1000 comes with a starter assortment of blades | * It operates on 110 volts.
- Unlike other groovers, this deluxe groover is instantly hot You don't have to wait for it to heat up to begin grooving When you plug the G-1000 in, it instantly heats to the setting on the dial, which has adjustable heat settings 1 through 4 This kit is great for numerous applications including race car tires, truck tires, motorcycle tires, karting tires, ATV tires, industrial tires, etc.
- Essentially, this groover is your easiest and most accurate choice for any tire grooving application | * Designed to be fast, smooth, & easy Glides over the tire surface Gives a precise, consistent cutting depth.
- virtually automatic | * Cuts with less heat than most groovers, which prevents heat degradation to race tire surface | * Unparalled control | * Instant blade change & adjustment.
- The Van Alstine G-1000 is designed to meet the exacting demands of modern tire grooving | * Its ease of use makes it possible for anyone to cut quickly & accurately | * The patented design of the G-1000 offers many advantages: The instant blade change & adjustment feature is critical for proper grooving | * This enables the operator to e....
Check Stock