Categories

Best Ground Terminal Block

Mardatt 32Pcs 9 Type Pluggable Terminal Blocks Connector Socket, 5mm/0.2inch Pitch PCB Mount Screw Male Female Connectors(2/3/4/5/6/7/8/9 Pins)

  • 【What you Get】The phoenix connector assortment contains 9 type of pluggable female and male terminal block: 6 pcs 2 pin terminal block, 6 pcs 3 pin terminal block, 5 pcs 4 pin terminal block, 5 pcs 5 pin terminal block, 2 pcs 6 pin terminal block, 2 pcs 7 pin terminal block, 2 pcs 8 pin terminal block, 2 pcs 9 pin terminal block, 2 pcs 10 pin terminal block, totally 32 pcs. Various type of screw terminal will meet your different demands..
  • 【Premium Material】Made of high-quality plastic and cooper, featured with good conductivity, effective flame retardant, long service time, safe and reliable. The screw have a better anti-oxidation performance which make it more durable. Repeatedly plug, not easy to deform..
  • 【Easy to Use】Not need to weld. Handy and easy to assemble, solder in easily and tighten very well on the terminated wires. Spiral wire is not easy to take off the line..
  • 【Wide Application】 The PCB terminal connector is ideal for small electronic watches, calculator, general computer, communication electronics device and other electronic equipment..
Check Stock

Make Me Yours (Billionaire's Sub Book 2)

  • ... AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

70955

  • FEATURES: 12 position terminal block for accessory attachment.
  • 6 40-amp cube style relays (plug-in style).
  • 6 Diodes to prevent LED “field collapse”.
  • Inline 50amp manual resetting circuit breaker.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit.
  • Fuse for LVCO which can be removed to bypass the LVCO.
  • High-temp, abrasion resistant wiring cables.
  • KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.
Check Stock

Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

  • FLEXIBLE USE---Without assembled, the prototype screw terminal block shield board allows you to try variety mount methods, so that you can use it flexibly.
  • COMPACT STRUCTURE---With compact structure, the prototype screw terminal block shield board is made up of screw terminal block, high quality PCB carrier, FR-4 glass fiber PCB.
  • RICH COMPONENTS---The prototype screw terminal block shield board includes prototype PCB, terminal blocks, and female header sockets, satisfying your working needs.
  • LONG SERVICE PERIOD---Made of high quality of material, and with delicate workmanship treatment, the prototype screw terminal block shield board has long serving life, practical and economic.
  • EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

Hilitchi 12pcs 5 Positions Dual Row 600V 15A Screw Terminal Strip Blocks and 400V 10A Pre-Insulated Terminals Barrier Strip

  • ✅ Product Name: [1] 5P Dual Row Terminal Block Stripe.
  • [2] 12P Fork Type Terminal Stripe. Package Content : 6 x Barrier Terminal Block, 6 x Terminal Stripe (3 x Black,3 x Red).
  • ✅ [Terminal Block Stripe] 600V 15A, Material : Copper, Plastic. Our dual row screw terminal strips has a clear cover to protect accidental touching of the terminal. The shell can not break in an environment with low temperature, it is clean and beautiful with smooth surface. Safer when they are protested by the sell..
  • ✅ [Fork Type Terminal Stripe] 400V 10A, Material : Copper, PVC. With our terminal block, no more cluttered battery terminals anymore. Our terminal strips are well made sturdy and with quality and robust screws..
  • ✅ [NEAT WIRING JOBS]- The terminal blocks are easy to install and held in place by two screw holes at either end of the terminal. Bonus standard spade crimp type connectors work well and you have many options of of making individual connections or by using the whole barrier bar or part of it up to 12 connections to a single line..
  • ✅ [QUALITY AFTER-SALE SERVICE]: If you do not satisfy with our products or any questions, please come to us anytime. 12 hours quick response service. We promise to offer a satisfactory solution to all your problems..
Check Stock

Recoil RCK0D True 0 Gauge Car Audio Dual Amplifiers CCA Wiring Installation Kits with OFC RCA Cable

  • 17ft (5.5 meters) Premium Frosted Blue 0 Gauge CCA power wire & 3ft (.95 meters) Premium Frosted Black 0 Gauge CCA ground wire with ring terminal provides optimal power transfer.
  • 4ft (1.2 meters) Premium Frosted Blue 4 Gauge CCA power wire 4ft (1.2 meters) Premium Frosted Black 4 Gauge CCA ground wire with ring terminal provides optimal power transfer.
  • Three pieces 17ft (5.5 meters) Oxygen Free Copper 2-Channel Helical twisted construction RCA interconnect cable, and 30ft (9.1 meters) Premium Frosted Blue/Black 12 Gauge CCA speaker wire.
  • One Recoil ANL/Mini-ANL Fuse-holder with 200A ANL fuse offers ideal protection for high powered systems. Two pieces DB12 one input with two outputs power distribution block.
  • All the installation hardware are included.
Check Stock

LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box Universal Electrical Project Enclosure White 7.9 x 6.1 x 3.1 inch (200 x 155 x 80 mm)

  • IP65 Waterproof, it can be installed horizontal and vertical as external junction box to hide electrical connections around your home and any property..
  • The junction box can easily be installed under the ground. Gives you full protection of the Cable Line..
  • Made of high quality plastic, it will not crack or fade in Sunlight, durable for years use..
  • It is used to install outdoor lamps and lanterns connection, wiring is easy to operate, more convenient and safer..
  • Available in 2 way. Terminal Block Current: 17.5A.
  • Terminal Block Voltage: AC 450V. If you want only 1 pack, please refer to ASIN B01IQUQF3Q.
Check Stock

10Pcs DIN Rail Mounted Ground Circuit Connection Terminal Block Screw Clamp Connector (USLKG5N)

  • Type: USLKG2. 5N, Rated voltage/current: 690V/34A..
  • ✯ Material: Nylon PA66 Housing + Alloy Copper Bodies + Nickel-plated Screws..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Lock firmly on the din rail, easy to insert the wire and the screw terminal holds the wires solid. Great use when making a prewired harness..
  • ✯ Application: Distribution boxes/cabinets and other general terminals, such as: home appliances, electronic circuits, machines, etc..
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 25A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 25A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 15A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 15A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock