Categories

Best Grounding Terminal For Enclosure

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks  + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail

  •   Height : 7.5mm/ 0.3".   Thickness : 1.2mm/ 0.047".   Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
  • 【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
  • 【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickly using those bridges. End Stopper Clamps are fastened using screws or simply snapped onto the DIN rail. End Cover Usage: Connection by screw tighten.
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 1....
Check Stock

Wall Mounted .125\ x 2\ x 6\ Copper Ground Bar Kit - Kit Includes Electrical Grease and 14 Bolts - TG18206RK

  • Provide the common grounding point within the Rack, Enclosure, or Cabinet.
  • Engineered to comply with US and International grounding requirements.
  • Kit includes: Ground Bar, 4 foot grounding cable with lug and ring leads, 2 mounting screws.
Check Stock

（10 Pack）ELEGRP Single Pole Toggle Light Switch & Tamper-Resistant Decorator Electrical Outlet

  • ✅【Quick Push-in Wiring for Switch】 Provide both quick push-in wiring and side wiring. Quick wiring push-in terminals accept #14AWG solid copper wire only. Side wiring terminal screws accept wire up to #12AWG copper or copper-clad wire..
  • ✅【Universal Application for Switch】 Suitable for residential use and most commercial areas that require only 15A switches. UL & CUL listed..
  • ✅【Tamper Resistant for Outlet】 Child proof shutter mechanism inside the receptacle prevents young children from inserting unwanted objects into the outlets..
  • ✅【Easy Installation for Outlet】 Designed for quick push-in wire and side wire. Break-off plaster ears for best flush alignment. Break-off tabs allow easy two-circuit conversion. Shallow dimensions allow for maximum wiring space in the junction box with other outlets and switches..
  • ✅【Self-Grounding for Outlet】 A green grounding screw and self-grounding clip provide for automatic grounding in the junction box, protecting you from electrical shock..
Check Stock

Ronybuy 10x Markers Wire Plug - 2 Wire Pigtail for Sealed Side Marker Tail Trailer Clearance Lights, 6" Long 2 Prong, Marker Lights Wiring Plug Fit 2" 2.5" Side Markers

  • 【Description】Pack of 10pcs of 2 prong male pigtails wire plugs, they can be used to replace the OE plug of tail/trailer/clearance/marker lights..
  • 【Specification】The plug harness connector is 2-Pin and 90°design, 6" long to connect with your lights easily. White is ground and black is positive. A #10 ring terminal of white wire is for easy grounding..
  • 【Application】Fits 2" and 2.5" side markers and clearance lights, or any clearance or side marker lights that require a 2 prong male plug, or a replacement for any other devices that require a PL-10 2-Pin plug. Fits most trucks & trailers, and more..
  • 【Easy Installation】Simply connect the 2 pins to the terminal before grounding the ring terminal to the chassis and connecting to a power source. Please note the connector plugs should work with round rubber grommets..
  • 【Warranty】2-Year Warranty, 45 days money back guarantee. The trailer light Harness wire is DOT Certified and Meets SAE requirements..
Check Stock

Greeking Out (Destination Daddies)

  • Wagan True Rated Power: 2000W with Surge power 4000W.
  • Pure Sine Waves (PSW) - allows these electronics to run cooler (less cycling), cleaner, and with less noise. PSW is the output form that comes from the AC Wall outlet in your house and is the most clean..
  • Fast Charging - two 3-prong ground fault protected AC outlets (NEMA 5-15), 3 position power switch (On > Off > Remote), 2. 1A USB Power Port, Power And Fault Lights, Solid Mounting Feet.
  • Ground Fault Protected Outlets - the Negative (Black) Solid Mount Terminal, Positive (Red) Solid Mount Terminal, Twin Cooling Fans, Solid Mounting Feet, and a Grounding Terminal.
  • RoHS compliant, CE approved, and ETL certified to conform to UL and CSA Standards.
Check Stock

Cutting Edge Power Expansion Box for All of Our Powerhouse Solar Generator Battery Boxes

  • Includes terminal blocks to connect up to (4) batteries..
  • Includes post terminal connection for the main solar generator battery box..
  • Options that include the battery will include a 100Ah deep cycle SLA/AGM sealed lead acid battery..
  • Enclosure internal dimensions: 20.5" L x 12.375" W x 9.5" H Enclosure external dimensions: 24.25" L x 15" W x 16.5" H.
Check Stock

MTX TNP212D2 12\ 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Planet 1500W Monoblock A/B Amplifier & 8 Gauge Wiring Kit

  • COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a complete 8 gauge amp installation wiring kit.
  • CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp.
  • Boasts 1200 watts max power and 400 watts RMS.
  • Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil.
  • SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet.
  • Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches.
  • CAR AMPLIFIER: Planet Audio Amplifier delivers 700 watts RMS x 1 @ 4 Ohm, 1100 watts RMS x 1 @ 2 Ohm, 2500 watts RMS x 1 @ 2 Ohm max power, 1500 watt max power.
  • Switchable input sensitivity: 100mV 2V or 2V 8V.
  • Dimensions (H x W x L): 2.19 x 10 x 10 inches.
  • INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable.
  • 20-foot high performance RCA interconnect.
Check Stock

Ideal Industries INC. 30-3392R 12 AWG 8 in. Solid Grounding Pigtail with Screw, Green (50 pack)

  • Grounding pigtail with a screw on 1 end and a stripped end on the other end for quick connections of grounding wires.
  • Ensures compliance with article 250 of the national electric code.
  • Brass-alloy terminal with a locking tab for fast, efficient device connection.
  • 8 in. lead is flexible for easy positioning in your metal outlet box.
  • Lead helps reduce stress on your device, wires and connection.
Check Stock

8 Terminal Bus Bar Terminal Block 10 Pack Brass Wire Screw Terminal for Car Boat Marine Ground Power Distribution Terminal Block

  • Brass terminal grounding strip bus bar block with 8 screws & 2 Stud.
  • High quality plastics base ensures great mechanical strength and durability.
  • Use M4 screws to fix it in place through the two screw holes on both ends of the terminal.
  • Widely used in power distribution cabinets, distribution boxes,mechanical equipment factories,electrical equipment factories,etc.
Check Stock

QPower Angled Style 6 x 9 Inch Car Audio Speaker Box Enclosures, 2 Speaker Boxes

  • UPGRADE YOUR SPEAKER SYSTEM: Simplify the process by utilizing these speaker enclosures to add additional 6-Inch by 9-inch speakers to your vehicle.
  • ENCLOSURE MATERIALS: The enclosure is constructed of 3/4" MDF carpet with a poly fiber damper lining and nickel-plated spring terminals. Reinforced with glued joints and seams..
  • COVER MATERIALS: Speaker box comes carpeted with a standard grey trunk liner for maximum durability.
  • INCLUDED IN PACKAGE: 1 pair of pre-wired enclosures, terminal cup, baffle material, and mounting screws..
  • CONVENIENT INSTALLATION: Terminal cup connectors allow for speaker wires to easily connect to the speaker boxes.
Check Stock

Absolute USA VEGD12+ Dual 12' Universal Vented Ported sub Box Subwoofer Enclosure

  • Universal Fit Dual Chamber 12" Vented Ported Car Sub Box Subwoofer Enclosure.
  • 15MM MDF Black Carpet with Speaker Terminal Competition Grade High Performance Subwoofer Box Engineered to Sound Incredible.
  • Machine precision cut mounting holes. Top of the line Glue for extra durable adhesion. High quality Splver spring loaded terminals. Designed, tested, and engineered to work with most of today’s popular woofers..
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
  • Premium Silver Push Spring Loaded Terminal Cups.
Check Stock