Categories

Best Gsm Terminal

Kaunosta SMA Cable 6.5ft SMA Male to SMA Male RF Coaxial Extension Cable for Security System Antenna Input RG316 Wire Jumper

  • 【SMA jumper cable】RG316 male to male SMA extension cable.The connector housing and pin in center are made of pure brass to ensure a lower VSWR for higher transmission efficiency..
  • 【Character】RG316 SMA male to male coaxial cable with high temperature resistance, acid and alkali resistance, corrosion resistance, high frequency, low loss and low impedance, wide applicability. Compared to rg174 cables, rg316 cables have better performance in terms of signal attenuation and transmission delay..
  • 【Common applications】Used for SDR Dongle、FPV Drone、LTE hotspot etc.(such as:used on your FPV ground station to mount the antennas on the camera tripods.
  • This sma male extension cable is great if you are going to have a semi-permanent antenna mount in your car.).
  • 【Widely used】To extend the cord for the antenna included with the phone terminal, onvian fixed wireless terminal GSM gateway 850/900/1800/1900MHz wireless access platform pstn dialer LED etc..
  • 【Package】1 x RG316 sma male to sma male cable.The cable has a length of 2 meter(6ft), so the position of the connector can be adjusted appropriately according to the usage scenario..
Check Stock

LM YN LTE 4G Omnidirectional Antenna 5.0dBi SMA Connector 700MHz 800MHz 900MHz 1800MHz 1900MHz 2100MHz 2600MHz 2700MHz Compatible 2G 3G GSM Terminal Frequency

  • Product Name: LTE 4G Omnidirectional Antenna；.
  • Frequency Range ：700MHz, 800MHz, 900MHz, 1800MHz, 1900MHz, 2100MHz, 2600MHz, 2700MHz.
  • V.S.W.R :1.8.Compatible 2G 3G GSM Terminal Frequency.
Check Stock

Mardatt 32Pcs 9 Type Pluggable Terminal Blocks Connector Socket, 5mm/0.2inch Pitch PCB Mount Screw Male Female Connectors(2/3/4/5/6/7/8/9 Pins)

  • 【What you Get】The phoenix connector assortment contains 9 type of pluggable female and male terminal block: 6 pcs 2 pin terminal block, 6 pcs 3 pin terminal block, 5 pcs 4 pin terminal block, 5 pcs 5 pin terminal block, 2 pcs 6 pin terminal block, 2 pcs 7 pin terminal block, 2 pcs 8 pin terminal block, 2 pcs 9 pin terminal block, 2 pcs 10 pin terminal block, totally 32 pcs. Various type of screw terminal will meet your different demands..
  • 【Premium Material】Made of high-quality plastic and cooper, featured with good conductivity, effective flame retardant, long service time, safe and reliable. The screw have a better anti-oxidation performance which make it more durable. Repeatedly plug, not easy to deform..
  • 【Easy to Use】Not need to weld. Handy and easy to assemble, solder in easily and tighten very well on the terminated wires. Spiral wire is not easy to take off the line..
  • 【Wide Application】 The PCB terminal connector is ideal for small electronic watches, calculator, general computer, communication electronics device and other electronic equipment..
Check Stock

Hilitchi 12pcs 5 Positions Dual Row 600V 15A Screw Terminal Strip Blocks and 400V 10A Pre-Insulated Terminals Barrier Strip

  • ✅ Product Name: [1] 5P Dual Row Terminal Block Stripe.
  • [2] 12P Fork Type Terminal Stripe. Package Content : 6 x Barrier Terminal Block, 6 x Terminal Stripe (3 x Black,3 x Red).
  • ✅ [Terminal Block Stripe] 600V 15A, Material : Copper, Plastic. Our dual row screw terminal strips has a clear cover to protect accidental touching of the terminal. The shell can not break in an environment with low temperature, it is clean and beautiful with smooth surface. Safer when they are protested by the sell..
  • ✅ [Fork Type Terminal Stripe] 400V 10A, Material : Copper, PVC. With our terminal block, no more cluttered battery terminals anymore. Our terminal strips are well made sturdy and with quality and robust screws..
  • ✅ [NEAT WIRING JOBS]- The terminal blocks are easy to install and held in place by two screw holes at either end of the terminal. Bonus standard spade crimp type connectors work well and you have many options of of making individual connections or by using the whole barrier bar or part of it up to 12 connections to a single line..
  • ✅ [QUALITY AFTER-SALE SERVICE]: If you do not satisfy with our products or any questions, please come to us anytime. 12 hours quick response service. We promise to offer a satisfactory solution to all your problems..
Check Stock

Xiaoyztan 10 Pcs 12-Position Fork Type Terminal Jumper Block Wire Connector Barrier Strip 400V 12A (Black & Red)

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • Three types of gold flat terminal set (2.8mm, 4.8mm, 6.3mm male and female) total are used in toggle switch, speaker, horn, etc. This terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, el....
Check Stock

Terminal Strips, FIXITOK 6 Sets 4/5/6 Positions Terminal Block Strips Waterproof 600V 15A Screw Terminal Strips with 400V 15A Pre-Insulated Terminal Barrier Strip Jumper

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 25A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 25A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 15A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 15A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

CGELE 6 Sets Terminal Blocks, 6Pcs 4/5/6 Positions 600V 25A Dual Row Screw Strip Block + Pre-Insulated Terminals Barrier 60Pcs Insulated Fork Wire Connector, 25A 4/5/6P+6 pcs Jumpers

  • ★【What You Get】 - In this terminal block set,it include 2pcs 4 positions/2pcs 5 positions/2pcs 6 positions 600V 25A double row screw terminal strip blocks with cover,6pcs 400V 25A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors.Total 72pcs packed in a bag..
  • ★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4/5/6 individual connections or by using the whole barrier bar or part of it up to 4/5/6 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals..
  • ★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable..
  • ★【Protect Cover】 - Our double-row connecting terminal also includes a transparent cover to shield dust and protect the term....
Check Stock

Terminal Block,2 Pack 8 Circuits 20-30A 200v-450v Dual Row Screw Terminals Strip +32 PCS Heat Shrink Wire Connectors

  • Practical Terminal Block Kit:How to clean up your cluttered wire connection?Our double row screw terminal strip block can help you to connect bare wires to avoid clutter, making wiring connection simpler and more efficient.This way you can easily disconnect a wiring branch without taking down the entire system..
  • Product Feature:The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite.
  • We also provide thick copper heat shrink wire connectors to ensures strong secure crimping every time..
  • Heavy Duty:The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance. High-quality insulated fork wire connectors kit is thick copper,with safe and durable..
  • Easy Install:The terminal strips are easy to install and hold in place by two screw holes at either end of the terminal. One mounting hole each end for fixed mounting.The fork terminal stripe can be cut in any position to meet with your different demand..
  • Package Included:2 x 8 positions dual row terminal blocks set,32 pcs insulated fork wire connectors in a bag.Terminal Block rated voltage/current Universal : 20A-30A/200-450V.And 100% guaranteed,If you have any questions about the product, we support un....
Check Stock

2PCS Battery Terminal Connectors 4 Way Quick Release Disconnect Battery Terminals Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG Copper

  • 【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections..
  • 【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss..
  • 【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity..
  • 【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench..
  • 【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc..
Check Stock

Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends – Fits 3/8-inch and 5/16-inch Posts

  • DESIGNED FOR MARINE USE: Easily replace your boat battery’s terminal ends with a high-performance alternative..
  • RELIABLE: The Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends are three times more conductive than other terminal ends..
  • USABLE: The BAF-MT1 includes one positive 3/8-inch terminal end and one negative 5/16-inch terminal end..
  • BUILT GREEN: Meets the standards established for RoHS (Restriction of Hazardous Substances) compliance..
  • SUPERIOR CONSTRUCTION: The BAF-MT1 replacement Marine Terminal Ends feature heavy-duty zinc-plated construction..
  • LONG-LASTING QUALITY: Trust Schumacher Electric for reliable and well-made battery accessories. Schumacher has been producing quality automotive products since 1947..
  • EASY TO USE: The BAF-MT1 replacement terminal ends feature easy-to-tighten wing and hex nuts for a secure connection..
Check Stock