Glass Corner Shelf 2 Pack - Shower Caddy Tempered Glass Shelf with Rails SUS 304 Stainless Steel Wall Mounted Shower Organizer for Inside Shower 24cmx24cm 6mm Silver
- Bathroom corner shelf with rust-proof stainless steel polished electroplated chrome fence, ABS electroplated uprights, suitable for wet environments such as bathrooms and kitchens..
- 24cmx24cmx6mm tempered glass, when broken, it will be broken into small pieces, which protects the safety of the family..
- Shower racks are suitable for almost all toiletries: such as shampoo, body wash, conditioner, soap and facial cleanser..
- There are two installation methods for glass corner shelf. The guide rail can be installed on the glass shelf, the toiletries are blocked, and the items are prevented from falling, and you can also install the guide rail under the shelf as a hook rack, towel rack, etc..
- Packing List: 2 x 6MM Thick Tempered Glass, 4 x Anti-rust Brackets, 1 x Hardware Pack, 1 x Installation Instructions..
Check StockMecor Sliding Shower Door 59\ W x 74.8\ H,1/4\ Clear Tempered Glass Sliding Glass Door Stainless Steel for bathroom
- ✔【HARDWARE FINISH】:1/4"(6mm) thick tempered glass safety, for easy cleaning and to resist water spots |58.5-60” W x 1” D x 74.8” H | Weight 106 lbs.
- ✔【REVERSIBLE INSTALLATION】:The reversible door of the shower slides to the right or the left, depending on user preference. The doors allow for up to 3/5 " of adjustability, canceling the effect of wall shift that may occur over time. This makes for an easy installation process and assurance that your product will continue to function for years to come.
- ✔【EASY TO INSTALLATION】:No need wall groove, hang 2 glass panels on the top rail, works with the bottom guide lock, solid guide rail with strong bearing capacity, can also make glass panel slide smoothly.
- ✔【STABLE FRAME STRUCTURE】:Stainless steel construction hardware will not rust, chip or scratch off. Shower door is easy clean, easy maintenance and that maintains its high gloss. Let you use for a long time, bright and clean as new.
- ✔【WATERPROOF DESIGN】:Premium quality seal strips for the glass door to prevent water leaking out. Make your bathroom outside clean and dry.
Check StockDreamLine Mirage-X 56-60 in. W x 58 in. H Frameless Sliding Tub Door in Chrome; Left Wall Installation, SHDR-1960580L-01
- Configuration consists of a Sliding Door and a Stationary Panel.
- Left Wall Installation (Stationary Panel on left, Sliding Door on right).
- Proprietary L-bar provides a streamlined, unobstructed look and structural support.
- Premium 3/8 in. (10mm) certified clear tempered glass.
- DreamLine exclusive ClearMax water and stain resistant glass coating.
- Anodized aluminum bottom guide rail and U-channel wall profile.
- Bottom guide rail can be trimmed up to 4 in. for width adjustment.
- Up to 3/8 in. adjustment for out-of-plumb (uneven walls) on Stationary Panel side.
- IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
Check StockYELNA Frameless Black Glass Sliding Bathtub Door,Adjustable 56-60 in.W x 62 in.H Rectangle Tub Door,Certified Thick Clear Clear Tempered Glass,100% Stainless Steel Hardwares
- ...d door seal provide 1/8 adjustability to accommodate out-of-plumb walls. Roller disks were tested 100,000 times, as solid, durable and quiet. Achieve an easy, worry-free installation..
- 【Reversible Design】Single sliding tub doors, reversible installation. Decide a right or left door opening by adjusting the floor guide direction, to fit your bathroom layout..
- 【LEAK-FREE Design】With an Anti-splash threshold(installed on the bottom) and a springy door seal (installed on the open side) always make your shower room cleaner and tidy.Minimum threshold depth of 3 in. is required for proper installation.
- 【Dimensions & Finish】56-60inch Width x 62inch Height. Walk-in: 21 1/2"~25 1/2"in. (Cut guide rail to adjust your size. Model can be trimmed up to 4 inches for width adjustment).Note: Do not cut the end of the guide rail bracket.Yelna custom shower rails in four finish for choosing,Matte black,Brushed Gold,Brushed nickel and Chrome,match your style,in order to a consistent and balanced bathroom aesthetic..
Check StockPOWERTEC 71387 55\ Guide Rail Joining Set for Makita or Festool Track Saws | Includes (2) Aluminum Extruded Guided Rails and (2) Guide Rail Connectors for Woodworking Projects
- Kit includes: (2) 55” guide rails and (2) track saw guide rail connectors.
- Function: This exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail.
- Premium quality: Made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects.
- Compatibility: The 55” GUIDE rails is compatible with Makita plunge saw and Festool track saws.
- Plus you can easily customize length using the POWERTEC Saw Guide Rail Connector kit, or fits Makita connector or Festool Connector for longer cuts. Additionally, this handy track saw tool can be used with the guide rail adapters and other rail guide devices to extend its compatibility to a wider range of machines, such as routers.
Check StockDreamLine Mirage-X 56-60 in. W x 58 in. H Frameless Sliding Tub Door in Brushed Nickel; Right Wall Installation, SHDR-1960580R-04
- Configuration consists of a Sliding Door and a Stationary Panel.
- Right Wall Installation (Stationary Panel on right, Sliding Door on left).
- Proprietary L-bar provides a streamlined, unobstructed look and structural support.
- Premium 3/8 in. (10mm) certified clear tempered glass.
- DreamLine exclusive ClearMax water and stain resistant glass coating.
- Anodized aluminum bottom guide rail and U-channel wall profile.
- Bottom guide rail can be trimmed up to 4 in. for width adjustment.
- Up to 3/8 in. adjustment for out-of-plumb (uneven walls) on Stationary Panel side.
- IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
Check StockDreamLine Mirage-X 56-60 in. W x 72 in. H Frameless Sliding Shower Door in Brushed Nickel; Left Wall Installation, SHDR-1960723L-04
- Configuration consists of a Sliding Door and a Stationary Panel.
- Left Wall Installation (Stationary Panel on left, Sliding Door on right).
- Proprietary L-bar provides a streamlined, unobstructed look and structural support.
- Premium 3/8 in. (10mm) certified clear tempered glass.
- DreamLine exclusive ClearMax water and stain resistant glass coating.
- Anodized aluminum bottom guide rail and U-channel wall profile.
- Bottom guide rail can be trimmed up to 4 in. for width adjustment.
- Up to 3/8 in. adjustment for out-of-plumb (uneven walls) on Stationary Panel side.
- Matches any single threshold SlimLine shower base 60 in. W (sold separately).
- IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
Check StockDreamLine Mirage-X 56-60 in. W x 72 in. H Frameless Sliding Shower Door in Brushed Nickel; Right Wall Installation, SHDR-1960723R-04
- Configuration consists of a Sliding Door and a Stationary Panel.
- Right Wall Installation (Stationary Panel on right, Sliding Door on left).
- Proprietary L-bar provides a streamlined, unobstructed look and structural support.
- Premium 3/8 in. (10mm) certified clear tempered glass.
- DreamLine exclusive ClearMax water and stain resistant glass coating.
- Anodized aluminum bottom guide rail and U-channel wall profile.
- Bottom guide rail can be trimmed up to 4 in. for width adjustment.
- Up to 3/8 in. adjustment for out-of-plumb (uneven walls) on Stationary Panel side.
- Matches any single threshold SlimLine shower base 60 in. W (sold separately).
- IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
Check Stockyoukzuan Tile Pliers Glass Pliers Heavy Duty Breaking Pliers,Glass Tile Cutter Hand Tools Set for DIY and Home Improvement with Glass Cutter,Glass Nipper,2Pcs Cutting Heads
- ...water alternately, each time for more than 40 seconds. Then the glass bottle will separate automatically. The smooth cutting knife will not hurt your hands, but it will cut the bottle perfectly. The blade is made of sharp and hard metal steel. It can still work normally after 10,000 cutting tests.
- 【Super blade and guide rail】 The guide rail can flexibly adjust the cutting angle to maintain stability. Three super-powerful blades can cut accurately every time, strong and durable, and can be used for a long time..
- 【Creativity and Environmental Protection】 For those who care about handling glass bottles, this is a good product, some of which are recyclable. This is an opportunity for you to recycle yourself. Through your creative recycling concept and manual practice, decorate your unique and beautiful life and help you make your own contribution to environmental protection..
- 【Package content】 1* glass bottle cutter, 1* hexagon wrench, 2* gloves, 1*ø6 drill bit, 6* sandpaper, 6* separation ring, 1* sponge gasket, 1* hemp rope, 1 instruction manual.
Check StockDreamLine SHDR-1760760-06 Frameless Sliding Shower Door, 58-60 in. W x 76 in. H, Oil Rubbed Bronze
- Reversible for a right or left door opening.
- Frameless curved glass and headerless design.
- Proprietary L-Bar utilized as a top guide bracket.
- Premium 3/8 in. (10mm) thick certified tempered glass.
- DreamLine exclusive ClearMax water and stain resistant glass coating.
- Bottom guide rail can be trimmed up to 2 in. for width adjustment.
- Up to 3/8 in. adjustment for out-of-plumb (uneven walls) on Stationary Panel side.
- Matches any DreamLine Slimline 60 in. W Single Threshold Shower Base (sold separately).
Check Stock260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail
- EXCELLENT FEATURES: Designed to have standard right angle, this circular saw guide rail ensures higher accuracy for woodworking. Circular saw guide rail system can quickly and accurately set the slicing or milling angle, which can make precise and repeatable 90 degree cuts with the guide rail, no need to readjust, you can use it for daily use or work, which can give you for a perfect experience..
- UNIQUE DESIGN: 90 degree saw guide for circular saw has a hollow design, light in weight and compact in size, both the daily storage and carrying are very convenient..
- DURABLE MATERIAL: 340mm track saw square right angle is made of high-quality aluminum alloy and stainless steel material, which has a stable structure and is not easy to damage and bend, rustproof and durable for long term use..
- EASY TO INSTALL: 340mm right angle circular saw guide rail is easy to use, with simple installation and removal steps, you can complete the installation in just a few steps, whether you are a professional woodworker or a beginner, electric circular saw track is essential..
Check StockMakita P-20177 Guide Rail Connector Kit, 2/pk
- Joins guide rails in two locations allowing for maximum connectivity.
- Joins guide rails for making longer dead-on straight or bevel cuts.
- Durable steel construction for long life.
- For use with Makita 118" Guide rail (194367-7), 55" Guide rail (194368-5), 39" Guide rail (199140-0), as well as select competitor rails.
Check Stock100mm Linear Rail Guide Portable High Precision Miniature Linear Motion Guide with Sliding Rail Block
- RAIL GUIDE LENTH: The length of the beautiful designed stable linear rail guide is 100mm(3.9in)..
- HIGH ACCURACY: The linear rail guide is of H accuracy level, which means high accuracy and suitable for accurate work..
- STRONG AND DURABLE: Made of premium steel, the linear guide is professional and technical rail and block, which is strong and durable..
- PORTABLE AND COMPACT: Small size and lightweight, the miniature linear motion guide fits for most automatic equipment..
- EASY TO USE: With smooth surface, the sliding block could be easily and lightly moved on the linear motion..
Check Stock