DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router
- INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
- ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
- 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
- BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
- Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
- When clamped, this solid guide shows no play and it tightly holds its grip.
- WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check StockBORA WTX Ruled Clamp Edge Saw Guide 50 Inch Length Rail for Circular Saws Cutting Track for Woodworking Contractors DIY 545050
- Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with....
- Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting.
- Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase....
- Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always....
- Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to....
Check StockBora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length 545100
- Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length....
- Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle....
- Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and....
- Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX....
- Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the....
Check Stock
Pro-Grip Straight Edge Clamps (24\ Clamp)
- Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing..
- Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable..
- The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects..
- Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play..
- The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24" clamp..
Check Stock
SMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2072
- Double NATO Clamp Ball Head:An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design.
- Flexibility: Camera monitor mount could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
- Strong Compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Monitor Cage(5″) SmallRig 1726, SmallRig 2008, Assassin Cage for Ninja SmallRig 1788,Cage for SmallHD SmallRig 1834 or other products with nato rail.
- Knob Lock:A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually.
- Please Note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg.
Check Stock
Powerblanket TH350 Insulated IBC Storage Tote Heater with Adjustable Thermostat Controller, Fits 350 Gallon Steel IBC Tote's
- The mechanical thermostat temperature controlling range is from 0℃ to 60℃, perfect for using to control heater.The adjustable button is for easy and convenient to adjust the controlling temperature..
- When the room temperature is lower than the temperature set by the thermostat, the circuit closes and the equipment starts. When the room temperature is higher than the temperature set by the thermostat, the circuit is disconnected and the equipment stops. N.O : When the room temperature is lower than the temperature set by the thermostat, the circuit is disconnected and the equipment stops..
- The bottom of mechanical temperature controller switch is with 2 wire interfaces,which can make wire connection become more sturdy and safer..
- The back of heat control regulator is with fixed bracket,installation guide rail is easy to fix.Using standard guide rail clamp design,more convenient to disassemble..
- The mechanical temperature control switch mainly use for controlling cooling applications ,like filter fan and other signal device..
Check StockWoodRiver Guide Rail 4 x 8 Kit
- Two 56" Guide Rail components feature heavy-duty aluminum extrusions.
- Guide rail component has a 2-1/8" x 1/2" profile with integral 1/4" T-tracks.
- Guide rail connector locks together multiple guide rails to form a continuous guide.
- Clamps swivel about the “T” shaped anchor at any angle - Guide rail clamps secure the guide rail at each end.
- WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check StockXCORTECH Airsoft Shooting Chrono Chronograph New X3200 Original MK3 @ TOMTAC
- High accuracy measurement. As the device with high accuracy and clamp rail, and fixed equipment after the every time are the same, and with the guide....
- Design of the four sides of the air, effectively alleviate the impact of airflow test. Improved stability and accuracy. The display surface and the....
- Not only can measure the speed, but also can measure kinetic energy, and can record up to 40 sets of speed and kinetic energy value of the 40 groups..
- Multiple power management and protection. The lithium cell has the function of over charging, over discharging and short circuit protect, and the....
- Package include: 1*Shooting Speed Tester, 1* U-shaped Clamp, 1* USB Cable..
Check StockRockler Rail Coping Sled for Router Table – Round Handle Router Sled for Firm Grip – Toggle Clamp Features Easy Tool-Free Adjustments - Maximum Workpiece Dimension 5” Wide x 1-1/4” - Router Jigs
- Coping Sled For Router Table: If you're building cope-and-stick doors and drawer fronts, our new rail coping wood sled will be an indispensable....
- Smooth-Running Sled: With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the router fence, your rails....
- Keeps Your Hands Safe: Particularly with drawer fronts, which sometimes use very narrow rails, the rail guide coping sled prevents parts from dipping....
- Prevent End grain Blowout: A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the....
- What’s Included? Our router table woodworking kit includes a Sled Base, Fixed Fence, Adjustable Fence, Lever Clamp, Sacrificial Piece, Front Handle,....
Check StockAction Mount - Picatinny Rail Mount + Locking Smartphone Mount for Video Recording While Hunting or Target Practice Includes Allen Wrench + Thumbscrew Wrench Picatinny Rail
- HEAVY DUTY PHONE CLAMP - This fully adjustable holder contains a spring loaded rubber lip so you can easily insert and remove your device with ease..
- SPRING LOADED - clamp contains toggle switch on top so you can enact the spring loaded top lip of the mount. This enable you to easily insert and....
- RAIL MOUNT - This CNC rail mount fits only standard rail designs, includes screw-pin tightening system to lock in place. This set includes an allen....
- SPORT CAM COMPATIBLE- Use Rail Mount with Sport Camera. Also, this phone clamp can be inserted onto any action sports mounts that work with sport....
- WHAT'S INCLUDED - High Quality adjustable phone clamp, quick clip, Picatinny Rail mount, allen wrench, 1 thumb screw, tightening wrench ($5.00 value)..
Check StockBESSEY KT5-2 2 spindle edge clamp for use with clamp rails up to 1/2
- Economical spindle clamp mounts on the rail of bar clamps.
- Allows bar clamps to also function as edge clamps.
- Mounts on bar clamp rail stock up to 1/2 in. thick.
- Fits any clamp rail up to 1/2 inch thick.
Check Stock
The Equalizer
- High accuracy measurement. As the device with high accuracy and clamp rail, and fixed equipment after the every time are the same, and with the guide rail can be made with the mining model in parallel, so the measurement result error is small, small fluctuation dynamic error..
- Design of the four sides of the air, effectively alleviate the impact of airflow test. Improved stability and accuracy. The display surface and the operation buttons are in front, and it is very convenient to operate and view the test data..
- Mini size is easy to carry. Simple and easy operation. Function is more abundant. Not only can measure the speed, but also can measure the energy, at the same time can record up to 40 groups of speed and the 40 group of the energy value..
- Multiple power management and protection. The cell has the function of over charging, over discharging and short circuit protect, and the integrated intelligent shutdown and low power shutdown function..
- The panel is mainly composed of digital display tube, function, key and LED indicator. The function key is the micro touching button..
Check StockSmallRig NATO Rail with Locating Screw for ARRI 48mm BUN2521B
- 【Install Way】SMALLRIG BUN2521 attaches to other accessory mounts for ARRI by using a 3/8”-16 screw and two locating pins.
- 【Quick Release】The NATO Rail compatible with NATO clamps or other accessories features NATO clamp for quick release. For example, SMALLRIG Magic Arm 2071, NATO Clamp 1973, NATO Handle 1995/2187..
- 【Anti-off】The spring-loaded safety pins on both ends prevent your devices from accidentally sliding off..
- 【Light Weight】The NATO Rail is made of aluminum alloy. Length of 48mm, weighs only 27g..
- 【Other NATO Rails】If you prefer other NATO Rail mounting options, we have SMALLRIG NATO Rail BUN2468(50mm), NATO Rail BUN2483(70mm), NATO Rail BUN2484(90mm), NATO Rail BUN2486(150mm)..
Check Stock
