Categories

Best Guide Rail T Type

Cloyes C-3210 3-Piece Set

  • Only fit - 2003-2005 INFINITI FX35 3.5L 3498CC V6 DOHC,2003-2005 INFINITI G35 3.5L 3498CC V6 DOHC,2003-2006 for NISSAN 350Z 3.5L 3498CC V6 DOHC,2002-2003 for NISSAN ALTIMA 3.5L 3498CC V6 DOHC,2002-2003 for NISSAN MAXIMA 3.5L 3498CC V6 DOHC,2003-2007 for NISSAN MURANO 3.5L 3498CC V6 DOHC.
  • What you get - 1x Timing Chain ,2x Timing Chains,1x Crank Sprocket (26 teeth),2xSprockets (external),1x Guide Rail (tensioner arm),1x Guide Rail (top - fixed),1x Guide Rail (left - fixed),1x Tensioner (lower),1x Tensioner (upper - left),1x Tensioner (upper - right),1x Water Pump with Gaskets.
  • Product features - Premium quality link belt type timing chain for exceptional durability,Meets or exceeds OEM performance requirements,Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
  • QUALITY - All components are closely inspected and validated to meet the strictest quality standards to ensure a long lifetime.
  • Part number - 13024-AL50A, 13025-EA22A, 13021-AL51A, 13028-JK20B,13024-AL50A, 13025-EA22A, 13021-AL51A, 13028-JK20B.
Check Stock

Gun Mount Shotgun for Gopro, 20mm Rail Connection Fixture CNC Rail Gun Side Mount Adapter Compatible with Airsoft Camera

  • Seconds to install - Mounted on guide rail for sliding adjustment, suitable for 20MM guide rail slide the mount over the rail..
  • Compatible Type - Compatible with GoPro, Insta360 action camera photography equipment accessories and 20mm rail..
  • Double screws design - the base for Gopro with a fastening screw, it can eliminate the gap between the base and the rail to keep stability of action camera, not any wobble..
  • Durable Material - Made of aeronautical aluminum alloy. High hardness and good corrosion resistance. The screw has plastic on the top, to prevent scratch from your gun body..
  • Great for hunters, military, law enforcement, recreational shooters, and airsoft players. Get great first-person-shooter style shots or reverse the camera on yourself and watch yourself in action..
Check Stock

ECCPP TS20395F Timing Chain Kit Fit for Ford Explorer Ranger Mustang for Mercury for Mazda Mountaineer 4.0l Sohc Engine Timing Chain Gear Kit 2006 2007 2008

  • Only fit - 2003 2004 2005 2006 2007 2008 2009 for Ford Explorer 2001 2002 2003 for Ford Explorer Sport Trac 2005 2006 2007 2008 2009 for Ford Mustang 2001 2002 2003 for Ford Ranger 2001 2002 2003 2004 2005 2006 2007 2008 2009 for Mazda B4000 1998 1999 2001 2002 2003 for Mercury Mountaineer.
  • Product features - Premium quality link belt type timing chain for exceptional durability,Meets or exceeds OEM performance requirements,Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
  • QUALITY - All components are closely inspected and validated to meet the strictest quality standards to ensure a long lifetime.
  • Important notice - Before placing the order please check your car model in the amazon fitment filter system in the top left corner.
  • What you get - 2x Timing Chain,1x Rear Jack Shaft Chain,1x Rear Cam Chain Tensioner,1x Front Cam Chain Tensioner,1x Jack Shaft Tensioner,1x Rear Cam Sprocket Right ,1x Front Cam Sprocker Left ,1x Front Jack Shaft Sprocket,1x Rear Jack Shaft Sprocket,1x Front Cam Chain Guide Rail,1x Rear Cam Chain Guide Rail,1x Jack Shaft Fixed Guide Rail,1x Balance Shaft Chain,1 x Balance Shaft Tensioner,1x Balance Shaft Fixed Guide Rail,1x Oil Line Restrictor.
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • Clear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

POWERTEC 71387 55\ Guide Rail Joining Set for Makita or Festool Track Saws | Includes (2) Aluminum Extruded Guided Rails and (2) Guide Rail Connectors for Woodworking Projects

  • Kit includes: (2) 55” guide rails and (2) track saw guide rail connectors.
  • Function: This exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail.
  • Premium quality: Made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects.
  • Compatibility: The 55” GUIDE rails is compatible with Makita plunge saw and Festool track saws.
  • Plus you can easily customize length using the POWERTEC Saw Guide Rail Connector kit, or fits Makita connector or Festool Connector for longer cuts. Additionally, this handy track saw tool can be used with the guide rail adapters and other rail guide devices to extend its compatibility to a wider range of machines, such as routers.
Check Stock

Fulton Rail Guide Coping Sled PRO For Cutting Profiles Into The End Grain Of Your Stock | Ideal for Cutting Precise Clean Joints for Cabinet Door and Drawer Fronts

  • When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails. This sounds easy enough, however the narrower your rails are, the more difficult it is to hold the stock firmly up against a router table fence. Our Rail Guide Coping Sled Pro solves this issue and helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most any other type of end grain cut on your router table..
  • The idea behind the Rail Guide Coping Sled Pro is simple.
  • hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down to....
Check Stock

Mssoomm 15mm HGH15 CNC Square Linear Guide Rail Kit 2Pcs HGH15-25.2 inch / 640mm +4Pcs HGH15 - CA Square Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGH15 linear guide rail set includes 2Pcs HGH HGR15-640mm（25.2 inch）linear guide rail and 4Pcs HGH15CA square type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGW 15 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGH-HA, HGW-CA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you can use s....
Check Stock

Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • HGW25 linear guide rail set includes 2Pcs HGW HGR25-2950mm（116.14 inch）linear guide rail and 4Pcs HGW25CA flange type carriage bearing blocks, easy to assemble and inter-changeable with other square linear rail kit, for example, the HGH 25 linear rail kit.
  • The guide rail is made of high-quality high-carbon steel, using quenching and tempering technology, long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you....
Check Stock

Iverntech MGN12 400mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail Guide Material: bearing steel. Rail Guide Length: 400mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

Usongshine MGN9C Linear Rail Bearing Sliding Block Match use with MGN9 Linear Guide for CNC xyz DIY Engraving Machine (200mm, C-Type)

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail guide material: bearing steel. Rail guide length: 300mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

SIMAX3D MGN12H 350mm Linear Rail Guide 2pcs MGN12 Linear Slide 8mm for 3D Printer and CNC Machine Upgrade (2pcs/Pack)

  • Package Include: MGN12H 350MM Linear Rail Guide *2PCS.
  • Each MGN12 350MM is fully oiled and packed individually..
  • SIMAX3D MGN12 Linear Rail Guide 350MM is made of heavy-duty bearing steel, which is more durable than other bearings, high stiffness, high precision, smooth running and low noise..
  • Linear Rails 350MM is widely used in industrial robots and CNC and other large.
  • MGN12H Linear Slide 350MM Note: Please use M3 T nut and screw to fix the linear rail for 20 series EU Al-profile..
Check Stock

260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail

  • EXCELLENT FEATURES: Designed to have standard right angle, this circular saw guide rail ensures higher accuracy for woodworking. Circular saw guide rail system can quickly and accurately set the slicing or milling angle, which can make precise and repeatable 90 degree cuts with the guide rail, no need to readjust, you can use it for daily use or work, which can give you for a perfect experience..
  • UNIQUE DESIGN: 90 degree saw guide for circular saw has a hollow design, light in weight and compact in size, both the daily storage and carrying are very convenient..
  • DURABLE MATERIAL: 340mm track saw square right angle is made of high-quality aluminum alloy and stainless steel material, which has a stable structure and is not easy to damage and bend, rustproof and durable for long term use..
  • EASY TO INSTALL: 340mm right angle circular saw guide rail is easy to use, with simple installation and removal steps, you can complete the installation in just a few steps, whether you are a professional woodworker or a beginner, electric circular saw track is essential..
Check Stock