Categories

Best Gun Taps

Brass Punch Set Hammer Bench Block Kit | Gunsmithing Gun Repair Tools Kit With Steel Plastic for Armorers Watch Jewelry and Craft

  • GUNSMITHING TOOL KIT: gunsmith hammer and punch set, essential armorers tool kit for firearms disassembly, gun repair and for custom builds..
  • PUNCH SET: array of standard, flat tip metal punch selection to remove and install solid pins.
  • features 1/16″, 5/56″, 3/32″, 1/8″, 9/64″,....
  • ADJUSTABLE GUNSMITH HAMMER: small hammer with 4 interchangeable head tips.
  • that's like having a metal hammer, brass hammer, nylon hammer and soft....
  • RELIABLE GUN REPAIR TOOL KIT: the gunsmithing hammer is well balanced for precision taps.
  • the tools are rubberized to help you grip and hold the tools....
  • PIN STARTER: pin alignment tool makes it easy to start a small pin and prevents damaging pins..
Check Stock

Real Avid Punch Set, Gunsmithing Tool Kit with Roll Pin Punch Set, Flat Tip Metal Punch Set, Brass Punch Set and Gunsmithing Tools: Pin Starter Tool, Finishing Non Marring Punch and Staking Punch Tool

  • GUNSMITHING TOOL KIT: all-inclusive, 37-piece gunsmith punch set, essential armorers tool kit for firearms disassembly, gun repair and for custom DIY builds.
  • COMPLETE PUNCH SET: array of standard, flat tip metal punch selection.
  • premium quality soft brass punches and a set of auxiliary gun smithing tools to remove and install common pins.
  • FLAT TIP PUNCHES: standard steel punches to remove and install solid pins for gun repair. INCLUDED: 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
  • ROLL PIN PUNCHES: feature round, half-ball tips for driving hollow pins, tension pins and spring pins, without the risk of causing damage. INCLUDED: 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
  • PREMIUM BRASS PUNCHES: softer than traditional steel punches.
  • allow to deliver more controlled taps, minimizing the risk of damage to valuable firearms. INCLUDED: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
Check Stock

Lisle 70500 Tap Socket Set

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
Check Stock

Lisle 83100 External Torx Plus Socket Set, 9pc

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
  • Ideal for use in areas where a T handle won't fit.
  • Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ... | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, ma....
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ... | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, ma....
Check Stock

Expandable 100FT Garden Hose Pipe - Lightweight, Durable& Felxible - 8 Function Spray Gun/Hose Hanger/Storage Bag/Brass Fittings for Lawn/Pet/Car/Boat Wash (Black-100ft)

  • leak-resistant connection / anti-rust metal fittings / On Off valve setting / nature latex pipe. never worry kink, twist or tangle. 100% satisfaction guaranteed with 1 year free placement warranty and 180 days money back guaranteed !.
  • ☀ RASS TAP CONNECTOR☀ – expanding hose fits the typical outdoor garden taps in US, this expandable garden hose is equipped with high quality 3/4″ adapters and 3/4″on-off valve. has solid brass fittings that Handle water pressure better than plastic fittings which maximum avoids of hose leaking water..
  • ☀MULTIFUNCTIONAL SPRAY GUN☀ – come with 8 functions spray gun,Angle+Flat+Full+Shower+Centre+Stream+Cone+Mist. you can switch the pattern for your use easily, the ergonomic rubber handle is non-slip and comfortable..
  • ☀ EXPANDING GARDEN HOSE PIPE☀ – flexible garden hose is non kink garden hose and aluminium end-ducting create a ability that is 3 times expansion length in use.thickening latex inner hose pipe combined with tightly knitted outer fabric bring good performance in expanding up and withstanding pressure without leaking or bursting..
  • ☀ What you get☀ – Garden hose comes with 1 year free replacement warranty ,1x 100ft Garden Hose,1x Spray gun ,1x Hose Hanger ,1x Storag....
Check Stock

Real Avid Hammer & Roll Pin Punch Set I Gunsmithing Tools Set with Small Hammer Roll Pin Punch Metal Punch Set I Tool Kit with Gunsmithing Hammer with 4 Tips Non Marring Punch & Pin Starter Tool,Red

  • GUNSMITHING TOOL KIT: gunsmith hammer and roll pin punch set, essential armorers tool kit for tension pin punch removal or installation and for gun....
  • PUNCH SET: array of roll pin punches: 1/16", 5/64", 3/32", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4".
  • ROLL PIN: feature round, half-ball tips for driving hollow pins, tension pins and spring pins, without the risk of causing damage..
  • ADJUSTABLE GUNSMITH HAMMER: small hammer with 4 interchangeable head tips.
  • that's like having a metal hammer, brass hammer, nylon hammer and soft....
  • RELIABLE GUN REPAIR TOOL KIT: the gunsmithing hammer is well balanced for precision taps.
  • the tools are rubberized to help you grip and hold the tools....
Check Stock

Massage Gun, Deep Tissue Percussion Massager for Pain Relief, Super Quiet Portable Body Relaxation Electric Muscle Massage Gun with 12 Attachment 30 Speed

  • ..., sports enthusiasts or the elderly so that all the people suffering from muscle discomfort can enjoy great muscle relief..
  • Portable & Ultra-Silent Massage Gun: QUIET POWER MOTOR 3.0 technology in combination with the silent rail structure can ensure the noise will never exceed 35dB even in the highest gear of 3,600 taps per minute. You can feel ease when using in the office or in the gym and even the sleeping family members beside you will never be disturbed. A high-quality carry bag is provided for free so that you can carry to use it anywhere to get away from the muscle discomforts anytime..
  • Super-long duration and LCD touch screen: Wireless massager equipped with High-capacity battery can support more than 15 days of duration (20 minutes per day). Touch buttons to adjust the massage speed and display accurate electric power and massage level in real time. IPX5 waterproof rating ensures multiple application scenes including heavy sweating after exercise..
  • Ergonomic Design & Long Battery Duration: The gun equipped with 2000mAh high-capacity battery weighs only 800g, which perfectly balances the product weight and battery duration. It’s so lightweight that you will never feel tired even holding to use for a long time. Due to the silicone sleeve,....
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
  • Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Unco....
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock