Categories

Best Gutters And Downspouts

HEATIT HIRD 80 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included..
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations..
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable..
Check Stock

PipeMate Self-Regulating Heating Cable for Pipe Freeze Protection, 120V, 5Watts/Ft. (3 Feet)

  • Material: The roof deicing cable is made of plastic + copper core, the self-regulating temperature design is safer and energy saving, easy and reliable to use on your roof..
  • Features: Pipe heating cable 50ft(15.24 meters), no need for thermostat, this heated cable can self-limiting temperature of 65℃, greatly reducing energy waste. (no heating when the internal temperature reaches 65℃). Three pulgs in US standard to meet the circuit use of most households..
  • Function: Designed to prevent pipes from freezing and water damage caused by ice dams, from forming on roofs, gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutters with our heat trace cable roof..
  • Use Places: This heat trace cable is perfectly for roofs, gutters and downspouts, easy heat roof de-icing cable..
  • Installation: Can be installed by spiral, crossing, straight, etc. Easy and safe to follow instructions, no overheat risk, and will not short or burn out if the pipe heating cable is overlapped..
Check Stock

HEATIT HIRD 200 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips and spacers are included..
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations..
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately 5 minutes, you should feel slightly warm to the touch. Then unplug the cable..
Check Stock

HEATIT HIRD 30 feet 5 Watts Per Foot Roof & Gutter Snow De-Icing Cable

  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned....
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug . Pre-assembled, ready to install, no maintenance required. Easy instruction manual, clips....
  • Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking,....
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building....
  • Testing the cable before the installation.Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the....
Check Stock

H&G lifestyles Roof Snow De-Icing Heating cable Self-Regulating-Plug-in Ready Heat Cable 140 feet 8 Watts Per Foot

  • ★H&G lifestyles heat tape（120 volt, 8 watts/ft. self-regulating 158 °F=70℃） Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • ★Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles. Suitable for all roof and gutter configurations..
  • ★Heated wire for roof is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables.
  • no maintenance required, Self-Regulating roof snow melt cable WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables..
  • ★Tough Modified Polyolefin as inner insulation and weather resistant TPE (high-low temperature) as out jacket. 100% screen rate and tinned copper core. More safe and more healthy.
  • Self-regulating temperature design is energy-saving and safer, If you are not completely satisfied with H&G lifestyles heating cable, please don't hesitate to contact us.
Check Stock

Heat it HIRD 20 feet Roof Gutter De-Icing Cable

  • Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground..
  • Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available.
  • Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs..
  • Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable..
  • Both CSA and ETL approved. 6 ft 18/3 cold lead with plug.
  • 5 watts/ft. Pre-assembled, ready to install, no maintenance required.
  • Easy instruction manual, clips and spacers are included..
  • Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with ....
Check Stock

MalCo. Tools SC2 Downspout Crimper

  • Makes a single crimp for downsizing aluminum downspouts.
  • Work gutters easily using this Malco Single Crimper Gutter Tool (SC2).
  • This light duty tools makes a single crimp for downsizing aluminum downspouts.
Check Stock

Radiant Solutions Company Heat Cable for Pipe Freeze Protection, 24 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt

  • ★H&G lifestyles heat tape（120 volt, 8 watts/ft. self-regulating 158 °F=70℃） Designed to prevent ice build up, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts..
  • ★Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles. Suitable for all roof and gutter configurations..
  • ★Heated wire for roof is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables.
  • no maintenance required, Self-Regulating roof snow melt cable WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables..
  • ★Tough Modified Polyolefin as inner insulation and weather resistant TPE (high-low temperature) as out jacket. 100% screen rate and tinned copper core. More safe and more healthy.
  • Self-regulating temperature design is energy-saving and safer, If you are not completely satisfied with H&G lifestyles heating cable, please don't hesitate to contact us.
Check Stock

The Gutter Guard - Wedge Eliminates Downspout Pipe Clogs From Leaves and Debris - 2-Pack

  • Keep Gutters Flowing - Eliminates Messy Clogging By Directing Leaves and Debris Away From Downspout Openings.
  • The Wedge Downspout Gutter Guard Fits All 2 in by 3 in Standard Downspouts.
  • Connectors Included To Connect Wedges Together For Downspouts Located Away From Corners of a Home. Made in U.S.A..
  • RISK FREE TRIAL! We encourage you to try and check your downspout for obstructions and size. This is meant for 2" by 3" downspouts. However, if you don't check prior to purchase, you have 30-days to receive a full refund and return the product. Please contact us if you have any questions. Thank you!.
Check Stock

Downspout Debris Filter Strainer Gutter Leaf Guard Residential Connector, White

  • Perfect drainage solution for homes that experience fallen leaves or debris in their gutters and downspouts.
  • Filters unwanted leaves and debris from the downspout to keep your drainage system flowing freely.
  • Fits 2 in. x 3 in., 3 in. x 4 in. or round downspouts with a male type end to join with 4 in. corrugated or PVC pipe.
  • Prevents drainpipes from becoming clogged.
  • Built in connector flexes for easy installation and holds its shape.
Check Stock

2 3/8 - Inch Aluminum Gutter Round Drain Outlet (Package of 5)

  • Package of 5 – 2 3/8 ” Inch Round drain Outlets, Mill finished Aluminum. Not to be used with Plastic Gutters.
  • Used with 5 or 6 Inch Gutters. With 3" x 4" Downspouts..
  • Heavy Gauge aluminum used (not like the material sold online and large box stores).
  • Should be sealed with GEOCEL CONSTRUCTION TRIPOLYMER GUTTER AND NARROW SEAM SEALANT.
Check Stock

Gutterworks.com Maxx Flo Outlet - Oversized Downspout Outlet (6 inch, Low Gloss White)

  • Your Cure to Plugged Downspouts!!! Increase Outlet Flow Up To 45% Over Standard Drop Outlets.
  • Constructed of .027 Aluminum - Available in 14 Colors - Available for 5” & 6” Gutters - Will mate ONLY with 3"x4" Downspouts..
  • An easy D-I-Y Project For Homeowners - Complete With Installation Template, Screws & Instructions!!!.
  • Available in two sizes - Proudly made in the USA!!!.
Check Stock

MEKKAPRO Aluminum Downspout Filter, 6-Pack, 3-Inch Expandable Rust-Proof Gutter Guard Filter, Strainer for Leaves Roof Screen

  • ...fense to maintain your home’s curb appeal by protecting your gutters, and preventing build-ups and damage to your underground drainage system, too..
  • ✅ PREVENT NESTING AND BURROWING. Gutter screens fit snugly and securely to keep critters from hiding and nesting in your downspouts. Avoid unwanted messes and havoc from birds, squirrels, and rodents by humanely discouraging and preventing them from getting into your gutters..
  • ✅ EASY INSTALLATION FITS MOST GUTTERS in seconds. It comfortably fits gutters 2 to 4-inches in size. The super flexible and easily extendable leaf filter guard is designed with spring-to-fit action to effortlessly fit most standard gutter sizes. Simply coil up or squeeze the fitler, fit it into your gutter, and release to a snug fit..
  • ✅ HEAVY DUTY, RUST RESISTANT 6-PACK is made from durable aluminum - designed to stand up to outdoor elements. The MEKKAPRO gutter filters are ideal for holding up against areas exposed to heavy rain or salt water from nearby shores..
  • ✅ REDUCE LADDER TRIPS and backbreaking labor. Because when it comes to cleaning out gutter....
Check Stock