Categories

Best Hall Effect Current Sensor

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

360 Degree Tiny Size 20mm Contactless Digitized Potentiometer Angle Encoder Sensor 0-5v Output 6 mm Shaft

  • Hall Switch Integrated Circuit Using hall Effect Principle..
  • USES The Semiconductor Integrated Technology Manufacturing Magnetic Susceptibility of the Circuit..
  • It is by the Voltage Regulator, Hall Voltage Generator, Differential Amplifier, Schmidt Triggers, Temperature Compensation and the Open Collector Output Stage Circuit Composed of Magnetic Sensitive Sensor Circuit..
  • Its Input For the Magnetic Induction Intensity, the Output is a Digital Voltage Signal..
Check Stock

SparkFun (PID 14544 Current Sensor Breakout - ACS723 (Low Current)

  • ACS723 AC DC current sensor with OPA344 OpAmp.
  • Measure both AC and DC currents from 10mA up to 5A.
  • Capable of 80KHz bandwidth. Fixed to 20KHz on board. JP1 can be closed to enable all 80KHz.
Check Stock

CHENJIN A3144 Hall-Effect Switch 10PCS 3144E 3 Terminal Sensitive Hall Effect Detector Switchs Sensor Transistor for Arduino OH3144 Magnetic Sensor

  • Premium Hall Sensor: These are 100% brand new sensors that have wide operating temperature range and can be applied to a variety of equipment.
  • Working Temperature: Limit parameter (25 Celsius degree).
  • Operating temperature TA: E:-20 ~ 85 Celsius degree, L: -40 ~ 150 Celsius degree.
  • Storage temperature range TS: -65 ~ 150 Celsius degree.
  • Wide Application: The switches are suitable for electronic toys, sports equipment, small household appliances, etc.
  • Stability for industrial or automotive applications operation, works with most unregulated supplies.
  • Specifications: 24V Power supply voltage VCC.
  • 50V output reverse breakdown voltage VCE.
  • Easy to Install: The hall effect switch sensor is small in size, high in sensitivity, no need for any complicated operations, easy to install and disassemble.
Check Stock

DIGITEN G1/2\ Water Flow Hall Sensor Switch Flow Meter Flowmeter Counter 1-30L/min

  • The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part..
  • There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry..
  • Output Waveform: Square Wave,output pulse signal..
  • Waterproof, heat resistance, pressure resistance, cold resistance..
Check Stock

20 Pack Hall Effect Sensor Transistor for A3144 A3144E OH3144E

  • Size : 19 x 4 x 1.5mm/ 0.75" x 0.16" x 0.06" (L*W*T).
  • Package Content : 10 x Hall Effect Sensor.
Check Stock

BTMETER AC/DC 1000A Clamp Multimeter, 4000 Counts Digital Clamp-on Meter with Data Logging Measure Amp Volt Ohm Capacitance Frequency Temperature Continuity, Electrical Tester 570T-APP

  • ⚡【DC AC Current Clamp Multimeter】This multifuctional clamp-on meter can accurately measures AC DC current with 400A/1000A ranges, 100mA/1A resolution；AC and DC Voltage to 1000V, Resistance to 60M ohms.
  • Temperarture -4~1832℉ (℃/℉ Optional), Test voltage 4V, can measure light-emitting diodes, and continuity test..
  • ⚡【Sensitive Hall Effect Clamp Sensor】Engineered with hall effect sensor to ensure high precision measurement on DC/AC amperage testing. Built with big jaw caliber size 1.77 inches (45mm), allows you non-contact measuring multiple wires at the same time. ❗Please separate the hot and neutral conductors or they will cancel each other out and give zero amp reading, just clamp on the LIVE line for accurate amperage testing❗.
  • ⚡【Electrical Data Logger】Get rid of hand-written notes or complicated maths. With this intelligent clamp amp meter, all electric measurements will be displayed on your phone or tablet, auto graph a trend chart, support to sharing out in Excel, TXT format. This clamp-on ammeter is reliable on remotely troubleshoot electrical problems in HVAC, household, commercial,....
Check Stock

HiLetgo G1/2\ Water Flow Hall Sensor Switch 1-30L/min 1.75MPa Flow Meter Flowmeter Counter Water Flow Sensor

  • 1-30L/min 1.75MPa 1/2" Hall Effect Flowmeter Control Water Flow Sensor.
  • The lowest rated working voltage: DC4.5 5V-24V.
  • Maximum operating current: 15 mA (DC 5V).
Check Stock

JauoPay Electric Bicycle Conversion Kit, 36V 750W EBike Brushless Gearless Hub Motor, 22.5' Front Wheel Frame for 26' x 1.95'~2.125' Tire, Dual Mode Controller

  • [High Power] - 36V 750W Brushless Gearless Front Hub Motor. Maximum speed can reach up to 25 Mph (40 km/h), 417 RPM, efficiency ≥ 80%. Effective stopping power as soon as you hit the brakes. A maximum torque of 40 N.M. Suitable for touring bikes, commuter bikes and mountain bikes..
  • [Dual Mode Controller] - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle.(If the components break down, controller will switch into non-hall effect mode, the motor will still be working.).
  • [Pedal Assist Sensor] - 8 point high effective Pedal Assist Sensor (PAS) allows you to ride your electric bike kit without a throttle response. You may operate your electric bike with electric power and your own effort with a nice and easy riding way..
  • [Conversion Accessories Included] - Front Hub Motor Wheel, Controller, Twist Throttle and Handle Bar, Brake Levers, 8 Point Pedal Assist Sensor, Cable Ties and User Manual. (Battery and Tyre are not included.).
  • [Dispatch in United State] - Our warehouse is located on California, we will dispatch your order A.S.A.P.
Check Stock

Hall Effect Potentiometer Angle Sensor 360 ° Measuring Range 0-5V Output 5V Supply Voltage (5V Supply Voltage, 0-5V Output 360 °)

  • Hall magnetic sensor module, model: KY-003, working voltage: 4.5V-24V..
  • Hall switch integrated circuit adopts Hall effect principle. The input is magnetic induction intensity and the output is digital voltage signal..
  • Features: small size, high sensitivity. Fast temperature response and good performance. High precision and reliability..
  • Applications: contactless switch, automobile igniter, brake circuit, position, speed detection and control, safety alarm device, textile control system..
  • Package content: 10 Hall magnetic sensor modules to meet your needs..
Check Stock

Linear Actuator Controller - Hall Effect for Synchronized Control - 30A - Wireless Remote Control kit for 24VDC Electric actuators

  • DUAL-CHANNEL - Connect up to 2x matching electric linear actuators with Hall effect feedback.
  • SYNCHRONIZED MOVEMENT - Actuators with Hall effect feedback allows for synchronized movement, ensuring accurate positions and even travel.
  • COMPATIBILITY - With a current rating of 30A, this control system is easy to use with a variety of 12v devices with hall effect feedback with 15A per channel.
Check Stock

Hall Sensor, 10pcs/lot A3144 3144E OH3144E Hall Effect Sensor Switches TO-92UA 3pin SIP

  • Model: NJK-5002C Supply voltage : 5-30VDC.
  • Detection distance :10mm (effective detection distance 0-10mm).
  • thread length: 32MM；Load current :150MA (no more than).
  • Detect objects ?metal material ?Product Material: Metal.
  • Output: NPN three lines Output state normally open (NO).
Check Stock

uxcell G1/2 Hall Effect Liquid Water Flow Sensor Switch Flowmeter Counter Meter DC 5V 60mm 1-30L/min SEN-HZ21WI

  • 1-30L/min 1.75MPa 1/2" Hall Effect Flowmeter Control Water Flow Sensor.
  • The lowest rated working voltage: DC4.5 5V-24V.
  • Maximum operating current: 15 mA (DC 5V).
Check Stock