Categories

Best Hammer Drive Screws

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

CycleOps Hammer Direct Drive Smart Trainer

  • Lifetime warrantyDescriptionWhile your friends painstakingly negotiate with neighbors and significant others for limited hours of ear-assaulting wheel-mounted indoor trainer time or risk frost bite to round out the required ride time, you'll be dialed in and crushing out watts on your CycleOps Hammer Direct Drive Trainer. The direct drive design saves wheel and tire wear for the road and carries claims of being "quiet enough to ride in a library," which means you can get your intervals in and keep important relationships intact. The secret to the Hammer is a massive, 20-pound flywheel that utilizes electromagnetic resistance to deliver a smooth, realistic riding experience. While no indoor trainer can ever exactly mirror outdoor ride feel, the Hammer is about as close as you can get. It's able to simulate riding grades of up to 20% and is built to handle up to 2,000 watts, which means even the best pro riders won't be able to max the Hammer out. For the rest of us, it means that this trainer has the range of capability to knock out any workout intensity our coach adds to the schedule. Using PowerTap technology, the Hammer is PowerTuned to provide power readings with a +/-3% accuracy while internal cooling mechanisms ensure readi....
Check Stock

binifiMux 10-Pack M6 x 100mm Allen Head Furniture Crib Baby Bed Bolt M6 Barrel Nut

  • - Size: M6 x 100mm Hex Key Drive Socket Cap Furniture Bolt.
  • - Product: Slot Head Hammer Furniture Nut Bolt Set.
  • - Package: 10 * Hex Socket Head Cap Screws Bolts, 10 * Barrel Nuts , one hex key.
  • - Widely Used for baby bed, bunk bed, table, chair, crib, cot, or workbench, boards, cabinets, cupboards, other furniture..
Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....
Check Stock

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

  • Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
  • Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
  • The washer on the anchor retains the pin and guides it during the driving installation..
  • Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
  • 304 Stainless steel is durable and rust resistant.
Check Stock

Freeman PECCKT 20 Volt Cordless Hammer Drill 20 Volt Cordless Impact Driver and LED Light Combo Kit with Rechargeable 2 Ah Lithium-Ion Batteries and Quick Charger

  • Hammer Drill: Ideal for drilling holes in harder surfaces such as concrete, brick, stone, and other masonry.
  • Hammer Drill: Brushed motor delivers up to 530 in.-lbs. of torque with a free speed up to 1,700 RPM to the 1/2" chuck.
  • Hammer Drill: 21 position clutch and 2 speed gearbox provide variable torque and speed performance.
  • Hammer Drill: 3 modes for switching between hammer, driving, and drilling applications.
  • Impact Driver: Designed for driving long screws or carriage bolts into support beams and wooden posts, driving screws into metal studs, and fastening....
Check Stock

Greenworks 24V Brushless Cordless Hammer Drill Kit, 530 in./lbs Torque, 20+1 Position Clutch, 1/2 '' Keyless Chuck, Variable Speed, (1) 4Ah USB (Power Bank) Batteries and Charger, LED Light

  • Greenworks 24V Lithium-Ion battery provides 20% more power and 35% more run-time, and delivers fade-free power with no memory loss after charging.
  • Highly efficient 24V brushless motor provides more torque, quiet operation, and longer life.
  • 1/2 in. metal keyless ratcheting chuck for easy bit changes.
  • 20-position clutch for torque control to avoid stripping / over tightening screws and 2-speed gearbox with speeds of (0-450, 0-1,750 RPM).
  • Drill Mode: For drilling holes in wood, plastic, and metal Drive Mode: For driving screws and bolts Hammer Mode: Drilling holes in masonry and concrete.
Check Stock

binifiMux M8 x 110mm 65mm Half Thread Furniture Barrel Screws Bolt Nuts Assortment Kit for Crib Cot Bunk Beds Chairs 6 Set

  • - Size: M6 x 110mm Hex Key Drive Socket Cap Furniture Bolt.
  • - Product: Slot Head Hammer Furniture Nut Bolt Set.
  • - Package: 10 * Hex Socket Head Cap Screws Bolts, 10 * Barrel Nuts , one hex key.
  • - Widely Used for baby bed, bunk bed, table, chair, crib, cot, or workbench, boards, cabinets, cupboards, other furniture..
Check Stock

TAILUG Hand Manual Reversible Impact Driver, 1/2 Inch Drive Impact Screwdriver Set Rusty Fasteners Extractor with S2 Steel Bits 16-Piece

  • /HIGH TORQUE IMPACT/: Strike the end of the impact screwdriver with a hammer. The drive handle will move 20° in the direction you have set. The instant impact will quickly tighten or loosen rusty, damaged or frozen screws, bolts or fasteners without damaging them. An ideal tool for motorcycle work or engine repair..
  • /REVERSIBLE HAND IMPACT DRIVER SET/: Can adjust the direction of use at any time, easy to loosen rusty or frozen screws, or repair door locks, car body fender. Adjust right to tighten fastener. "L" and "R", on the handle ensure easy identification. Adjustment method: Hold the head and press the handle downward while turning the handle..
  • /HEAVY DUTY CHROME-VANADIUM STEEL/: Chrome-plated steel impact manual driver with larger and thicker bottom ensures optimal strength and resistance to corrosion, while the knurled handle provides a sturdy and safe grip. The whole body of the scewdriver is heat-treated for reinforced solidness. Black manganese phosphate coating on the surface, anti-corrosion and anti-rust, prolong the service life..
  • /S2 ALLOY STEEL BITS/: It comes with 14-Piece S2 alloy steel precision-milled impact driver bits and screw extractors. S2 alloy steel screwdriver bits can withstand larger impact force and higher torque, which pre....
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • ...emove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while res....
Check Stock

GRACE USA Gun Care Tool Set In Nukaf Case, Tools for Gunsmiths, Includes Screwdrivers, Brass Punches and 17 Tool Set, Made in USA

  • SET INCLUDES: 8 piece gun care screwdriver set, 8 piece brass pin punch set, & 8 oz brass hammer.
  • SCREWDRIVER SET: Custom hollow ground to fit scope screws, plug screws, guard screws, floor plate, sight screws, and many other gun screws.
  • BRASS PUNCH SET: Consists of eight brass pin punches sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16".
  • 8 OZ BRASS HAMMER: Hand-turned from CDA 360 brass rod, extruded in a USA mill, beautifully hand-polished.
  • GRACE USA TOOLS ARE PROUDLY 100% MADE IN THE USA.
Check Stock

Worldity 200Pcs Self Drilling Drywall Anchors with Screws, Drywall Anchors Tapping Screw Kit, No Drill or Holes in Wall, Self-Drilling Drywall Anchors for Fixing Picture, Cabinet, TV Shelf -70lb

  • ...d, it is divided into two parts to better fix on the wall. The drywall anchors screw’s flat shape design, leaves only a small gap in the drywall when you remove it, convenient for you to repair later..
  • EASY TO INSTALL: Without using a hand drill to drill holes,only use a hammer to drive the ribbed anchors into the wall, then insert screws, and finally tighten the screws with a screwdriver until they are fixed.It can be completed within 30 seconds, improving work efficiency..
  • WIDELY USED: Very suitable for fixing curtains, home pictures hanging, closets, clapboard brackets and and TV wall brackets ect. Especially for apartment dwellers and anyone who rents (or manages rentals) to hang your art and pictures while minimizing damage and repair to drywall..
  • SIZE & PACKAGE: The metal drywall anchor size is 1.18 "x 0.39", and the screws size is 1.18 "x 0.15". You will receive 100 anchors and 100 screws. If you have any satisfaction, we provide 360 days free replacement service, so you can buy with confident..
Check Stock