Categories

Best Hand Brake Lever Cover

WEIYINGSI Right Brake Master Cylinder Lever GY6 50cc 125cc 150cc 250cc Moped Scooter 10mm Banjo Bolt

  • New Right Hand Brake Lever Master Cylinder Assembly with Brake Switch and Lever.
  • Fit 7/8" (21mm) Handle Bar,Piston Bore Diameter: 12.7mm.
  • Works with many 50cc 125cc 150cc 200cc Moped Scooters such as Taotao Roketa Sunl Peace Jonway etc.
  • Package Included: 1 x Brake Master Cylinder Assembly.
Check Stock

Acouto Hand Held Vacuum Pump Tester, Motorcycle Motorbike Trucks Car Hand Held Brake & Clutch Bleeder Vacuum Pump Tester Set Bleed Kit

  • ✔Selected high quality material with high-strength, is sturdy, durable and easy to operate..
  • ✔Copper material barrel is durable and wearable, with good toughness and airtightness. Easy to read the data. Fine polished anti-rust surface treatment with anti-slip rubber sleeve, is wear-resistant, beautiful and comfortable to grip..
  • ✔Rich configuration in the joints, and the pressure gauge accurately measures the vacuum pressure..
  • ✔It can be operated by one person. The joint is suitable for a variety of automotive brake systems. The hand operated pump pulls the fluid through the bleed nipple, no need to use the brake lever or pedal..
  • ✔Suitable for testing vacuum-driven components in automobiles and trucks, including distribution board advance mechanisms, heating and plates, PCV, the headlights cover door and the exchange regulator, release the brake fluid pumping unit, and the car/motorcycle brake oil replacement..
Check Stock

EBIKELING 1 Pair Left & Right Waterproof Electronic Brake Lever Set for Electric Bicycle, Handle Grip Brake Accessory for e Bike, Long Use Bike Brakes

  • High Quality: The brake lever on this electric bicycle is made from a high-quality aluminum alloy, which is waterproof, strong, lightweight, and resistant to a range of bad conditions..
  • Easy to Install: The installation simply requires two cables to be connected and the handle to be fixed.
  • there aren't many processes involved. The installation of the electric bicycle brake lever is quick and easy..
  • Comfortable Design: The innovative design brake lever on the electric bicycle is easy to operate and has a comfortable grip. You'll have an enjoyable journey thanks to these bicycle brake levers..
  • Ebike Accessories Parts: A great replacement piece for your bike's broken or worn brake lever. It plays a significant part in motor protection and can turn off the motor's power supply whenever you are braking, extending the life of your motor..
  • Widely Used: Our brake lever works with a variety of electric scooters and electric bike parts. This brake lever kit is compatible well. These bike brake levers are for the only e bike..
Check Stock

MTATCN 7/8 inch Brake Lever Folding Clutch Set for 22mm Handlebar 50cc 70cc 100cc 110cc 125cc 150cc SSR ATV Pit Dirt Bike Motocross Black

  • 【Wide Compatibility】The clutch and brake lever set is designed to fit all motorcycles with 7/8 inch (22mm) handlebars. These include 50cc 70cc 90cc 110cc 125cc 140cc 150cc pit pro pit bike trail bike dirt bike.
  • 【Upgraded Spring】The levers are equipped with longer and upgraded springs, which deliver better return force and responsiveness. They're also fitted with stainless steel screws that stand well against damages caused by mud, water, or rust.
  • 【Long-Lasting Design】Clever engineering enables these levers to fold outwards, which can keep them from snapping when the bike falls. They are manufactured using a low-pressure casting process to make them less porous and much stronger.
  • 【Comfortable Experience】Ergonomically designed to be rounder and smoother, the clutch and brake parts feel great to grip. The levers can also be adjusted to accommodate varying hand sizes.
  • 【Complete Set】The package includes a left hand lever with perch and a right brake lever without master cylinder.
Check Stock

Parking Brake Actuactor LR072318 Replacement for 2010-2016 Discovery 4 LR4 and 2010-2013 R-ange R-over Sport XXSR

  • Parking Brake Actuactor OEM Part Number: LR072318.
  • Parking Brake Actuactor Fit for: 2010-2013 LR4 / Discovery 4 V8 5.0L.
  • 2010-2013 Ran-ge Ro-ver Sport Supercharged.
  • The working principle of the electronic parking brake system is to control the parking brake through the friction generated by the brake disc and the brake pad. Compared with the mechanical hand brake, the control method has changed from the mechanical hand brake lever to an electronic button..
  • The electric parking brake or the EPB is an advanced version of a conventional parking brake or handbrake. Sometimes, people also refer to this system as 'Electronic Parking Brake'. Technically this system is a sub-part of more advanced 'Brake by Wire' system..
  • Professional installation and reprogramming is required. Please ask help for professional engineer to install this auto part. Cautious operation!.
Check Stock

Adjustable Brake Clutch Levers for Yamaha YFM 660 Raptor 2001-2006 YFM 700 Raptor 2000-2006 YFZ 450 S/T/V 2003-2006 YFM 350 Raptor 2006-2013,Banshee YFZ350 1995-2008 YFS200 Blaster 2003-2007

  • ATTENTION:Please carefully check the levers title and products description to make sure that this model and year works for your model before ordering..
  • High quatily:Motorcycle brake clutch levers are made with 6061-T6 Aluminum & finish via anodized process, anti-oxidizing, long lasting and not easy to....
  • ADJUSTABLE: By simply adjusting the set screw of the lever, the reach can be adjusted from the smallest hand to the greatest hand and provides the....
  • Lever Length: short version, 14.7cm (for 2 fingers). Fully 6 positions adjustable..
  • Easy to use:Brake clutch lever is easy to install, perfect fitment and no modification is needed.If you wanna other YEAR and MODEL levers,please do....
Check Stock

Acouto Brake Lever Pedal for Pit Dirt Bike 50cc 110cc 125cc Rear Hydraulic Brake Lever Pedal and Spring Rear Brake Pedal Foot Lever Replacement

  • Fitment---- Brake Lever Pedal is suitable for most Chinese import Pit / Dirt bikes with hydraulic brakes. For use with hydraulic brake systems. The brake pedal lever is produced according to the original 1:1 original version, the key positions are precise and the lines are perfect.
  • Stable Performance---- High level of accuracy and sensitivity, enhance safety of your vehicle. Exquisite workmanship, stable performance and high reliability.
  • Good Replacement---- Easy and quick installation, it can be used with hydraulic brake systems. A direct replacement for the old or broken rear brake pedal foot lever, great match to your vehicle.
  • Professional Manufacturing---- Pit Bike Brake Lever Pedal is based on strict quality control, precise design, standard manufacturing, accurate size, light weight design, stable performance work and improved durability.
  • Quality Assurance---- As a professional seller, high quality products and services have always been what we stick to. Every Lever Pedal has passed the quality inspection before leaving the factory. Please confirm whether the product is suitable before purchasing.
Check Stock

2 Pieces Mountain Bike Brake Aluminum Alloy Brake Handles with 3 Finger Design 2.2 cm Diameter and Bike Brake Cables Wires for Most Bicycles, Road Bikes

  • Applicable bikes and size: bike brake handle is suitable for handlebars with a diameter of 2.2 cm/ 0.87 inches, which can be applied to most bikes, including road bike, mountain bike, children's bike, fixed gear bike, folding bike, etc..
  • The 3 finger designed of the handle make it suitable for most people's hand, even for children.
  • Ample accessories: there are 2 pieces double-ended bicycle brake cables provided for you, one end is suitable for mountain bike and the other is for road bike.
  • Apart from the cables, you will also receive 4 pieces O rings and 4 pieces bike cable caps.
  • Quality brake: adopting the material of aluminum alloy, mountain bike brake is tough and sturdy enough for people to use for a long time.
  • The brake cables are made of stell, featuring good durability and strength.
  • Practical function: owning a sturdy feature, bicycle brake lever adds little burden on your bike, making sure your riding could perform smooth and balanced.
  • The ferrules and caps function as protecting your bike cables from paints peeling off and friction, putting on cable cap can effectively prevent the cable end from scratching, the length of the brake line can be tailored based on your will.
  • Easy to install: bike brake lever is simple to mount on the bikes, after fin....
Check Stock

NIBBI High Sensitivity Short Stroke Light Control Motocross Throttle Handlebar Fit Dirt Bike Motocross

  • Throttle handle grips fits for most of 50cc 90cc 110cc 125cc 140cc 150cc 200cc & 250cc 4-stroke 7/8" ( 22mm) Bar ATV dirt bike.Compatible mini bike....
  • 7/8" Universal brake clutch lever fit 50-1000cc ATV Dirt Bike Mini Bike Scooter,fits for Honda CRF SSR 125cc Coolster Roketa Baja X-Treme Pit Dirt....
  • Twist throttle accelerator handle made of high quality tubber material.Dirt Bike throttle cable length is 47 inch,The throttle assembly is easy to....
  • Package includes left hand grip,right hand grip,47 inch throttle cable,throttle housing clamp,brake clutch lever.The throttle cable assembly is easy....
  • Our services:If there is any issues about our throttle handle within 12 months, do not hesitate to contact us.We provide carefree return or issue you....
Check Stock

FOMTOR 3x7 Bike Shifters Set 21Speed Mountain Bike Shifters Left Right Brake Lever Shifter with Shift Cables for Mountain Bike Folding Bike,V-Brake 1 Pair

  • Suitable for 22.2mm diameter handlebar.Compatible with V-brake systems and cable disc brake(Mechanical disc brake).Perfect for most of Mountain....
  • Visible display.Designed with optical gear display indicator to show you the gear position..
  • 3 speed left brake lever, 7 speed right brake lever, totally 21 speed for optional..
  • Package included one pair left right brake lever shifter set. Comes with shift cables..
  • Easy to stall.Brake levers made of aluminum alloy.Brake cables made of stainless steel..
Check Stock

MOSNAI Club Car Brake Cluster Assembly, Driver & Passenger Side Rear Brake Assembly Fits Club Car DS Precedent 1995-UP Tempo 2018-up Golf Cart,OEM# 1018233-02,103380201,103380202,1018233-01

  • 【Fit Models】Golf cart brake assembly fit Club Car DS & Precedent 1995-Up gas and electric golf cart, Tempo 2018-up golf cart..
  • 【Replaces OEM#】Club Car driver side brake assembly, Left, OEM#1033802-01,4246,1018233-02,Club Car passenger side brake assembly, Right, OEM#1033802-02,4202,1018233-01..
  • 【Good Quality】 With the quality golf cart Club Car brake assembly, you don't need to worry about the brake issues or fracture problem..
  • 【Easy installation】1 pair Club Car DS rear brake assembly for one golf cart, directly replace without adjusting the brake spring..
  • 【Package Included】Includes backing plate, adjustable mechanism, brake shoes with retainers, springs, activating lever and dust cover. Does not include brake drum..
Check Stock

Motorcycle Clutch Lever 7/8 Motorcycle Break and Cutch Levers for Most Motorcycle Motorbike Pit Bike Moto Blue

  • 【 Wide Compatibility 】-- This motorcycle brake and clutch lever fit for most motorcycles with handlebar of 22mm in diameter, such as for Yamaha....
  • 【 Unique Style & Abrasion Resistantance 】-- This motorbike brake and clutch lever bracket surface paint finish for enhancing its corrosion and....
  • 【 Precision Processing & Pefect Decoration】Precision machined pivot bore to ensure a perfect fit. CNC cutting, exquisite and smooth lines, an....
  • 【 Premium Material 】-- The clutch and brake lever is made of aluminum alloy material, sturdy, not easy to aging and abrasion resistant, to ensure....
  • 【 Easy Installation 】Motorcycle brake and clutch lever has simple installation process, practical and convenient to use, no modification required.....
Check Stock

SHIMANO BL-MT200 Replacement Right Hydraulic Brake Lever Without Caliper

  • Replacement right side lever for Shimano BL-MT200 hydraulic disc brake.
Check Stock