Categories

Best Handles For Square Jack

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • [Make Structural Repairs]: The BISupply Adjustable Shore Jack Post House Support Jacks 1-Pack transforms 4x4 inch (10.2 cm) square lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-....
Check Stock

Stark 20 Ton Air/Hydraulic Operated Bottle Jack Air Tools Auto Low Profile Manual Jack Air Jack with Handle

  • Ideal Jack - Great for automotive, van, farm, industrial, truck repair, moving machinery, construction work and heavy equipment.
  • Great for Manual Lifting - Includes two additional detachable handles for manual lifting when in absence of an air compressor.
  • Easy to Transport - Small size allows jack to be transported to any location. Side handles allows for easy gripping & carrying.
  • Safe and Reliable Lifting - Heavy duty steel construction allows jack to be used multiple times without wear and tear and can handle heavy duty loads with ease..
  • Easy to Connect - Comes equipped with both hose & connector to quickly connect to air compressor for lifting operations with ease..
Check Stock

Stark 12-Ton Air/ Hydraulic Bottle Portable Air-Operated Bottle Jack Lift Jack Air Jack with Handle

  • Versatile Uses Jack - Safely and reliably lifts most vehicles with a minimum lift of 10-1/4 inches high to a maximum of 20 inches high.
  • Safe and Reliable Lifting - Heavy duty steel construction allows jack to be used multiple times without wear and tear and can handle heavy duty loads with ease..
  • Great for Manual Lifting - Includes two additional detachable handles for manual lifting when in absence of an air compressor.
  • Easy to Transport - Small size allows jack to be transported to any location. Side handles allows for easy gripping & carrying.
  • Easy to Connect - Comes equipped with both hose & connector to quickly connect to air compressor for lifting operations with ease..
Check Stock

EZ Square Holder

  • MULTIPLE GRADATIONS: Make the exact mark you need! Gradations Included For Marking Common, Hip, Valley, And Jack Rafters.
  • FEATURES: Pocket-Sized Swanson Blue Book, A Comprehensive Guide To Help Workers Make Correct Angle Cuts For Any Pitched Roof, and it includes pages of....
  • INCLUDES: Features Common To 5 Different Tools (Try Square, Miter Square, Saw Guide, Line Scriber, And Protractor) Making The Speed Square Something....
  • EASY TO USE: 1/4-In Spaced Scribing Notches And The Diamond Cutout For Easy Rafter Seat Cuts And Scribing The Most Common And Popular Stud Widths, and....
  • MADE IN USA: The Speed Square, made in the USA since 1925, is essential for every carpenter, construction professional, roofer, and DIYer.
Check Stock

9TRADING Square Clay Spade Scoop Shovel Chisel Bit 1-1/8" Hex Shank 4 Demolition Hammer

  • JACK HAMMER SQUARE MOUTH EXTRA WIDE SERIES CLAY SPADE CHISEL. Demolition Hammer Clay Spade Bit. For digging Scooping clay, hard packed gravel and dirt..
  • Fit most Brand Name Demolition jack Hammer that has 1-1/8"(30mm) hex Fitting. Makita, Hitachi, Bosch, etc....
  • Overall dimensions: 5-1/4"W x 17-1/2"L, Shovel dimensions: 5-1/4" W x 8-1/4", Weight 9 LBS.
  • Compatible with Michigan, Hitachi, Makita, Baumr Ag Electric Hammers, Ozito, TWM, Millers Falls 30mm Hex Head Jack Hammers..
  • Content: 1x Wide mouth Jack Hammer clay spade Chisel..
Check Stock

Bonbo Floor Jack Seals Kit, 2 Ton, Quality Replacement Parts for Repairs Compatible with Lincoln Walker Model 93642 All Series Floor Jack Series B C E

  • Prevent your Jack Points from bending when using a jack to lift your car.
  • Compatible with most late model BMW or Mini vehicles.
  • Durable polyurethane construction, soft enough to absorb hard edges while supporting the vehicle.
  • Please ensure proper floor jack sizing and safety precautions, if the floor jack being used has a SMALLER lift point than our jack pad, it may cause the jack pad to fold.
  • Base Diameter: 2.8 Inches Square Dimensions: 2.2 Inches, does not fit Trolley Jacks.
Check Stock

Titan Fitness Rackable Open Trap Bar, Rated 1,500 LB, Specialty Open-Ended Olympic Weightlifting Barbell, Built-in Jacks, 32mm 38mm Knurled Grips, Deadlift, Carries, Lunges, Squats

  • OPEN DESIGN: The 23" open-ended frame allows for variations beyond your standard deadlift, including loaded carries, split squats, lunges, and more..
  • DUAL HEIGHT FIXED HANDLES: The dual handles feature two offset grip diameters of 32mm (skinny) and 38mm (fat) with a medium diamond knurled grip. The handles are fixed to the hex frame with the skinny handles higher than the fat grips..
  • BUILT-IN DEADLIFT JACK: The built-in bar jack features 1.5" legs with rounded feet to easily rock the frame into position. When the bar is positioned vertically, each leg has a large 7" x 2.5" footprint to provide stability when the bar is positioned vertically for loading/unloading..
  • RACKABLE SPECIALTY BAR: Plate loading just became easier with the Rackable Trap Bar. Athletes can begin their movements directly from the starting height rather than having to pick the bar up off the ground..
  • DIMENSIONS: This 65 LB Open Trap Bar has an overall length of 88.5". The handles have 24.5" between them. Each sleeve has a loadable length of 16" that fit Olympic-sized weight....
Check Stock

Klein Tools 85664 Screwdriver Set, Square Recess with Color Coded Handles and Heat Treated, Chrome Plated Shafts, 4-Piece

  • Screwdriver Set with color coded handle ends for quick and easy identification.
  • Screwdrivers feature round shanks with square recess tips for square recess screws.
  • Chrome plated shafts resist corrosion and Cushion-Grip handles provide handles for greater torque and comfort.
  • Double wings inside handles provide solid, twist-resistant blade anchors.
Check Stock

Mopar Jeep Wrangler JL Gladiator JT Tall Jack Base Spare Tire Jack Base New OEM

  • INCREASE PRODUCTIVITY: Each 3 ton jack stand is designed to increase your productivity while maintaining safety.
  • Safely and easily adjust the height of these tall jack stands from 11-1/2”- 17" as needed.
  • SUPPORTS MANY VEHICLES: This car jack stand supports rated capacity, partial vehicle loads on one end of a vehicle.
  • 3 ton floor jack stand handles a wide range of vehicles, including small cars, SUVs, and light duty trucks.
  • SUPERIOR PERFORMANCE: These 3 ton jack stands have a recessed saddle that ensures secure placement and a strong hold that won’t slip.
  • Wide pyramid foot base on these vehicle jack stands provides added strength and stable support.
  • PLACE ANYWHERe: The jack stands set has large welded foot pads to provide extra support when placed on asphalt and other surfaces, and our jack stands combo prevents sinking on soft surfaces.
  • These car stands keep your car protected.
  • PRODUCT SPECIFICATIONS: Includes Two (2) 3-ton jack stands.
Check Stock

YETHAN Extra Large Laundry Bag 3 Pack, Black, Travel Laundry Bags with Drawstring Closure, 30\x40\

  • Large Capacity- large laundry bags 85L capacity with durable thick nylon material, never worry too much clothes would tear the bag apart. Liner size: 13.8x13.8x27.56H in..
  • Square Base - Our laundry bag for delicate with square base, which can hold more dirty clothes than normal skinny laundry bags in the market, what's more, the square base which makes stacking folded laundry inside easier..
  • Fit Hamper - You can use it as separate hamper bag for laundry or can put it into your exist laundry basket or clothes hamper, and tie the bag up with drawstring for laundry directly. Fit most laundry hamper at home or dorm room..
  • 2 Handles & Locking Closure - With 2 handles for easy transport and locking closure will keep your stuff inside laundry bag no spilling during the transport..
  • Multi-purpose storage bag – 2 pack travel laundry bag with Handles can be used for sports, home, travel or more. Offer more storage space..
Check Stock

SPECSTAR Under Hoist Support Stand 3/4 Ton 1500Lbs Capacity Jack Stand Lifting from 1.3 to 2 Meters with 12 Inch Diameter Steel Base

  • Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches..
  • A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety..
  • This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another..
  • The patented built-in by-pass device protects the hydraulic system from over-pumping damage. Before using the jack, insert provided handle into the handle sleeve, then pump 6 to 8 full strokes. This will help release any pressurized air which may be trapped within the reservoir.
  • This 2 Ton low-profile jack is ideal for auto repair services in your home garage. In addition, it is covered with a 1-Year warranty from the date of the purchase..
Check Stock

BILT Hard 3 ton Aluminum Racing Steel Floor Jack with 2 Jack Stands Low Profile Hydraulic Dual Piston Rapid Pump 6000 lb Capacity Blue

  • Includes Two Double Locking Jack Stands: It comes with 2 Packages. The heavy-duty jack stands safely support up to 6000 lb., They are constructed with....
  • Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a....
  • Low Profile: The aluminum racing floor jack has a 3-ton/6,000 lb. lifting capacity with a 3-7/8 in. to 19-1/2 in. lifting range, it provides you with....
  • Easy Operation: The 3 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into....
  • Rapid Pump: The high-performance low profile car jack has an exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It....
Check Stock

Stark 22 Tons Heavy Duty Air Bottle Low Profile Air Hydraulic Manual Bottle Jack Hoist Auto Truck Manual

  • Great for Manual Lifting - Includes two additional detachable handles for manual lifting when in absence of an air compressor.
  • Easy to Transport - Small size allows jack to be transported to any location. Side handles allows for easy gripping & carrying.
  • Safe and Reliable Lifting - Heavy duty steel construction allows jack to be used multiple times without wear and tear and can handle heavy duty loads with ease..
  • Versatile Uses - Safely and reliably lifts most vehicles with a minimum lift of 10-1/4 inches high to a maximum of 20 inches high.
  • Easy to Connect - Comes equipped with both hose & connector to quickly connect to air compressor for lifting operations with ease..
Check Stock