Categories

Best Hangkai Outboard Motors

Motor Propeller, 7 1/4 5-A 3 Blades Aluminum Propeller Boat Outboard Motor for Hangkai 3.5HP

  • Fitment: The outboard motor propeller is especially designed for Hangkai 3.5HP..
  • Excellent Quality: Made of high quality CNC aluminum material, durable and practical..
  • Light weight and portable to carry, stable characteristics, high reliability..
  • Easy and convenient to install, directly replace the old or broken one..
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

2 Stroke 3.5HP Outboard Motor, 49CC 40cm Short Shaft Outboard Motor Boat Engine with Water Cooling CDI System for Inflatable Boat, Kayak, Canoe, Fishing Boat

  • Fitment: The outboard motor propeller is especially designed for Hangkai 3.5HP..
  • Excellent Quality: Made of high quality CNC aluminum material, durable and practical..
  • Light weight and portable to carry, stable characteristics, high reliability..
  • Easy and convenient to install, directly replace the old or broken one..
Check Stock

Suuonee Boat Motor Propeller, 7 1/4 5-A 3 Blades Aluminum Boat Propeller Outboard Motor for Hangkai 3.5HP

  • Fitment: 7 1/4 5-A 3 Blades Aluminum Propeller, Especially designed for Hangkai 3.5HP..
  • Applied High Quality Material: Made of high quality CNC aluminum material, fine lacquering, durable and practical. Stable characteristics, high reliability..
  • Easy and convenient to install, directly replace the old or broken one. Light weight and portable to carry..
  • Perfectly Match: Produced according to original standards level, high accuracy, this Outboard Motor Propeller will perfectly match with your Hangkai 3.5HP..
  • Quality Guarantee: We provide 24-month worry free warranty, please feel free to contact us if you have any questions after received our products..
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

Recoil Pull Starter for 2 Stroke Outboard Motor 2hp 3.5hp Hangkai Boat Engine

  • Fits two-stroke outboard motor 2hp 3.5hp hangkai boat engine..
  • Package includes: 1 pull starter + 1 pawl.
Check Stock

Recoil Pull Starter for 2 Stroke Outboard Motor 2hp 3.5hp Hangkai Boat Engine

  • Fits two-stroke outboard motor 2hp 3.5hp hangkai boat engine..
  • Package includes: 1 pull starter + 1 pawl.
Check Stock

Recoil Pull Starter for Two-Stroke Outboard Motor 2HP 3.5HP HANGKAI Boat Engine 3.5 HP Pull

  • Recoil Starter For Two-Stroke Outboard 2HP 3.5HP HANGKAI Boat Engine.
Check Stock

Co-parts Recoil Pull Starter for 2 Stroke Outboard Motor 2hp 3.5hp Hangkai Boat Engine

  • Fits two-stroke outboard motor 2hp 3.5hp hangkai boat engine..
  • Package includes: 1 pull starter + 1 pawl.
Check Stock

YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat up to 25hp Auxilary Trolling Mount

  • Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs.
  • Specifications : Motor pad - 7.9"(20.1cm) wide, 6.3"(16cm) and 8.15"(20.7cm) two side length, 1.09"(4.3cm) thick, stainless nylock nuts (metric).
  • Applications : Fits most style of 2-stroke outboard motors.
  • Easy to install : 5 vertical running position lock bars.
  • locking the safety knobs to keep the bracket in place.
  • holds the outboard motor up or lowers....
  • Note : please be careful of the sharp edge when you install.
  • Please feel free to contact us if you have any question about the product. We would try....
Check Stock

Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37\-51\ Extendable

  • Full steering and throttle control while sitting away from your trolling or small outboard motor.
  • Fits gas and electric outboard boat trolling motors 15HP and under.
  • Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
  • Designed to fill tiller handles on all electric and gas outboard motors 15 hp or under.
Check Stock

TUFFIOM Outboard Boat Motor Stand, Engine Carrier Cart Dolly for Storage, 315lbs Weight Capacity, w/Wheels (Black)

  • 【High-quality Materials】 The outboard boat motor stand carrier cart dolly is made of sturdy steel tubes and solid wood, which are scratch and wear resistant and not easily deformed. The surface of the steel tube stand is electroplated to prevent rust and corrosion, extending its service life.It is also fixed with high-quality screws to ensure a good and stable structure and a high load capacity..
  • 【High Load-bearing Capacity】 This outboard boat motor stand carrier cart dolly features a thickened pine hanging board with a loading capacity of up to 154.32lbs, which can withstand the weight of most outboard motors..
  • 【Good Stability】 It has a geometric triangular structure and two widened rear wheels, making the trolley more stable and less likely to tip over, so it is easier and safer to use.The simple construction of this trolley makes it very easy to install. It comes with all the necessary accessories in the package for convenient and time-saving installation..
  • 【Space Saving】The two support frames on the sides have been carefully designed with clasps so that you can fold this trolley quickly and without takin....
Check Stock

Sporacingrts Outboard1 1/2' -16 Flywheel Puller Removal Tool 91-849154T1 Compatible with Mercury Mariner Compatible withce Yamaha

  • ★[ Fit For ] -- Fit for Most 45HP+ Mercury, Mariner, Force and Yamaha outboard motors with 1 1/2"-16 TPI threads but doesn't work on Verado.
  • ★[ Easy to Use] -- Made it easier to remove the flywheel without damage and easy to lift the outboard motor.
  • ★[ Precision Size ] -- Size: 1 1/2"-16 TPI Tool Threads & 5/8"-18 TPI Bolt Threads.
  • ★[ Durable Quality ] -- Nice craftsmanship, solid and heavy duty, the flywheel puller with black oxide finish to prevent from corrosion.
  • ★[ Tool Needed ] -- Needs tool when changing Mercury outboard motors on boats and lifting the engine off transom.
Check Stock