Categories

Best Hard Sealing Butterfly Valve

DERNORD Sanitary Butterfly Valve Repair Kit, Silicone Seat w/ (2) Bushings - for 1-1/2\ Valves

  • Size (spec): for 1-1/2" Sanitary Butterfly Valve.
  • This sanitary butterfly valve repair kit is mainly suitable for DERNORD butterfly valve.
  • Temperature Rating (spec): 15°F thru 200°F.
Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • ...bility to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover..
  • Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness withou....
Check Stock

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

  • 【FOOD-GRADE 304 STAINLESS STEEL】 - The pneumatic butterfly valve comprises 304 stainless steel material, no odor, high strength, and good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak..
  • 【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
  • 【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
  • 【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
  • Environment temperature: 14 °F to 176 °F.
  • Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
  • 【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, an....
Check Stock

R134A Self-Sealing Can Tap with Right Hand Thread, R134A Valve Tool Bottle Opener with 1/2" Female R-H Thread and 1/4’’ SAE Male Connector, Fits for R134A Automotive Air Conditioning Charging

  • 【COMPATIBILITY】 -- This R134A self-sealing dispensing valve bottle opener fits for a self sealing 1/2" right hand thread for use with most R134A self-sealing/reusable designed cans. Please note there are two kinds for self-sealing can taps, R134A and R1234YF can tap, R134A self-sealing can tap with right hand threaded, but R1234YF self-sealing can tap with left hand threaded. Please check your can before purchase..
  • 【THREAD 】 -- R134A valve can tap connecting thread 1/4’’ SAE Male, interface thread 1/2’’ right hand female thread..
  • 【EASY INSTALLATION】 -- Aupoko R134A self-sealing valve can tap is designed with safety check valve, and easy to open R134a self-sealing can with valve to turn off to reserve for future use..
  • 【PREMIUM QUALITY】 -- The R134A self sealing can adapter is made of aluminum alloy with heavy-duty construction, with gasket protected to prevent leaks for durable use..
  • 【1 YEAR WARRANTY】 -- Order R134A self sealing can tap from Aupoko, we offer 1 YEAR WARRANTY, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..
Check Stock

1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )

  • ...h opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
  • Widely used: Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
Check Stock

Onwon 2 Pieces Steam Release Handles Universal Silicone Pressure Valve for Instant Pot Duo Model 3, 5, 6, 8 Qt Quart Steam Release Valve for Electric Pressure Cooker Replacement Part Accessories

  • Steam release valve for instant pot is the cupboards or cabinets savior. With our pressure limit valve, you needn’t worry about cabinets being damaged by the steam any more..
  • Venting & sealing control: the Steam Release Valve controls “Venting” and “Sealing” of your instant pot pressure cooker. Firmly Gripped to your instant pot lid, never fall off easily..
  • Material: Onwon steam release valve for pressure cooker is made of food grade PP and hard silicone, high-temperature resistant, hygeian, durable and solid, smooth surface, has certain weight which is in good quality, reliable performance and long service life..
  • Performance: this steam release handle works well as your original one and make your precious instant pot work like new, to make your pot performs normal and efficient as usual, can solve your problems of long cooking time with old accessories..
  • Suitable for: includes 2 pieces of steam release handles, you can change the old one with it to get a better using effect. Our steam release handle can be applied for pressure cooker, instant pot including IP-DUO60, IP-DUO30, IP-DUO50 and IP-DUO80, for all 3, 5, 6, 8 qt, as universal replacements or accessories..
Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water drainage pipe by yourself..
  • Well-designed For Wide Use: This commercial carbon steel interceptor calls attention to the thoughtful details as well, such as the solid outlet ....
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

Universal Replacement Floater and Sealer for Power Pressure Cookers/Relief Jigger Valve for Pressure Cookers Safe Regulator Weight Pressure Control 80KPA 1.5 Inch

  • Floater Valve/Sealing Ring/ Jigger Valve is are essential for pressure cooker to work Under normal situation,floater valve inserts into the lid from outside to inside. The floater valve locks the floater from inside, keeping the floater valve in place.
  • The sealing ring is often washed off, leaving the floater valve loose and the pressure cooker unusable，This floater valve and sealing ring set fits the lids of almost all pressure cooker universally.
  • This floater and sealer set fits many models of the Power Pressure Cookers including but not limiting to XL (6 & 8 quarts), YBD60-100, PPC780, PPC770, PPC790 ,CSG60, IP-CSG50, IP-LUX60 and IP-LUX50. It does not fit IP-DUO50 or IP-DUO60.
  • Pressure Cooker Jigger Valve External Size (Approx) : 2.6 x 3.8cm/1″x 1.5″(D*H)，Bottom Hole Dia : 10mm / 0.4″，Weight : 127g.
  • Please check the pictures to see the sizes of the set before buying.
Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • ...uality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock

R134A Self Sealing Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter and Valve Core Remover for Air Conditioner Manifold Freon Charging Hose

  • 【R134A SELF SEALING CAN TAP 】This R134a self sealing can tap valve only fits for self sealing cans（such as Walmart sells 12oz Self-Sealing Container） with 1/2'' ACME thread and this 134a self sealing can tap cannot be used on puncture style cans. Please be careful when you buy..
  • 【WIDE COMPATIBILITY】This R134a self sealing can tap can directly connect 1/4" SAE (R12 R22) female fitting AC charging hose and through the tank adapter （ 1/4" SAE female x 1/2" ACME）to connect 1/2" female AC charging hose..
  • 【MATERIAL】Both the r134a self sealing can tap and the tank adapter are made of solid premium brass which make them can even work under extreme conditions, features with long-lasting seals to prevent leaking..
  • 【VALVE CORE REMOVER】Our R134A can tap comes with extra automotive high and low pressure side service port valve core removal, dual head with thick and thin heads will fits most models..
  • 【SERVICE】Our QC department do 100% quality inspection on the R134a self sealing can tap before delivery. We will give you a 100% satisfactory solution if the R134a self sealing can tap is defective. Your valuable suggestions and advice will be greatly appreciated by our team..
Check Stock

Boltigen R134A Self Sealing Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter for 1/4 and 1/2-inch AC Freon Charging Hose (1/2 Self Sealing)

  • 【R134A SELF-SEALING CAN TAP 】 Our R134a self sealing can tap valve fits for 12oz R134a self-sealing cans and designs with hand operated valve control.this 134A self sealing can tap can only be used for self-sealing cans with 1/2'' ACME thread, either cannot be used on puncture style cans..
  • 【WIDE COMPATIBILITY】Our r134a self sealing can tap fits self sealing R134a containers（such as 12oz Self-Sealing Container） with ACME threads to directly connect 1/4" SAE (R12 R22) female fitting AC charging hose .Come with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac charging hose..
  • 【TANK ADAPTER】Our R134A car air conditioning tank adapter comes with 1/4" SAE female x 1/2" ACME male flare, connects to R134A manifold..
  • 【PREMIUM QUALITY】Round smooth handle for easy operation. Our R134A refrigerant self-sealing can tap with adapter is made of heavy duty brass to last under extreme conditions for durable using, with screw-on design and safety check valve, even working under extreme conditions, features with long-lasting seals to prevent leaking..
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • ...uality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock