Categories

Best Hardened Nails

Darller 200 Pack Nail in Cable Clips Ethernet Cable Nails Tacks Clips 7mm for Cat6 Cable - White

  • GREAT MATERIAL - Our cable tacks are made of premium UV stabilized plastic and hardened 1 inch nails. Acid resistance, corrosion resistance, good insulation, ageing resistance, strong bearing capacity..
  • UNIQUE DESIGN - Handy alternative to wiremold, raceway, or conduit.
  • Ideal solution for routing cables such as a short run TV coaxial cable in a home theater setup or a long run antenna cable in an office warehouse. One piece cable clip with an integrated nail with no extra parts to lose..
  • MULTIPLE USING - Nail in cable clips provide snug and secure placement of an LMR 240, RG8X, RG58 or RG59 coax cable, RG6 digital video coaxial cable, digital audio coaxial cable, Ethernet Cat 5 or Cat 6 network cable, 12 to 16 AWG speaker wire, phone wire, USB cable, or slim video cable.
  • Supports most cables with a 7mm outside diameter or smaller..
  • HOW TO USE - Orfanize and route cables along baseboards or wood trim molding.
  • Run ethernet clips in tight spaces around door frames with the confidence that they will remain in place..
  • RISK FREE GUARANTEED - Quality guarantee and 5-star customer service. If you are not 100% completely satisfied with your cable nails, simply let us know and you will be offered a FULL refund or replacement.DescriptionDarller 200 Pack Nail In Cab....
Check Stock

Heavy Duty Picture Hangers 100 lbs - 10 Pack - Plaster Wall Picture Hangers - OOK Picture Hanging Hooks

  • Heavy Duty Picture Hangers support 100 pounds with three picture hanging nails per picture hook.
  • Nails for hanging pictures are sharp pointed nails which make a very small pin size hole in wall - ideal for plaster walls and drywall.
  • Hardened blue steel nails provide maximum support while minimizing wall damage and holes. Strong steel nails won't bend when going into hard plaster walls.
  • Plaster picture hangers and drywall picture hangers for paintings, mirrors and other heavy artwork.
  • Professional Picture Hangers used by museums and art galleries.
Check Stock

TEKTON 8 Inch End Cutting Pliers | PCT10008

  • Cuts off nails and screws, trims wires, and pulls out staples.
  • Blades are induction hardened to HRC 58-64 for superior cutting performance and durability.
  • Overhanging jaws and flush rivet create clearance to cut off long nails or wires.
  • Round nose profile provides a high-leverage rocking prying action to pull out stubborn nails and staples.
  • Wide, gently rounded handle profile with slim, nonslip grips lets you comfortably squeeze as hard as needed.
Check Stock

EZARC Oscillating Tool Blades Carbide Multitool Saw Blades for Hard Material, Hardened Metal, Nails, Bolts and Screws, 3-Pack

  • EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades..
  • Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting..
  • Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc..
  • The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material..
  • Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market..
Check Stock

Concrete Nail Gun, Silencer Shot Nail Grab, Steel Nails Gun, Portable Nail Gun Set, Concrete Nailer With Case, Manual Fastening Tool for Cement Wall

  • ✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
  • ✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
  • ✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
  • ✅ Includes: Concrete T-Nailer | Cardboard box.
  • ✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.
Check Stock

Klein Tools D200028GLW Pliers, Hi-Viz Diagol Cutting Pliers with Short Jaws and Glow in the Dark Handles, 8-Inch

  • Diagonal Cutters with glow in the dark grips to easily locate your tool in dark or low lit areas.
  • Plier grips charge in natural and artificial lighting.
  • Cuts ACSR, screws, nails, and most hardened wire.
  • High-leverage design. Rivet is closer to the cutting edge for 36-Percent greater cutting and gripping power than other plier designs.
  • Short jaws and beveled cutting edges permit close cutting of wire, nails, and most hardened wire.
  • NOTE: Glow time and intensity may vary if charged in low light. Clean grips regularly to maintain glow brightness.
Check Stock

Plaster Picture Hangers 30 lbs - 25 Pack - Picture Hanging Nails - OOK Picture Hanging Hooks - Picture Hang Solutions

  • Brass plated Picture Hooks support 30 pounds.
  • Nails for hanging pictures are sharp pointed nails which make a very small pin size hole in wall - ideal for plaster walls and drywall.
  • Hardened blue steel nails provide maximum support while minimizing wall damage and holes. Strong steel nails won't bend when going into hard plaster walls.
  • Works well as a drywall picture hanger or plaster hanger.
  • Professional Picture Hangers used by museums and art galleries.
Check Stock

Stanley Proto J1444G Hand Drilling Hammer 4 Lb

  • Well-balanced, drop-forged steel head with a hardened face.
  • Designed for use with chisels, punches, star drills, and hardened nails.
Check Stock

Hand Drilling Hammer, 4 Lb, Steel

  • Well-balanced, drop-forged steel head with a hardened face.
  • Designed for use with chisels, punches, star drills, and hardened nails.
Check Stock

Paulinrise Nail Strengthener for Treating Weak, Damaged Nails, Promotes Growth, Use as a Top Coat or Base Coat

  • Hardens nails: The tip of the nail is the most fragile, unprotected part that breaks easily. Mavala Scientifique helps strengthen and harden the tip of the nail to repair damaged nails. For men and women of all ages.
  • Restores weak nails: Say bye to flaking, peeling or splitting nails with Mavala Scientifique. Get longer, harder, beautiful nails that will finally look great with a couple of coats of our Mavala nail polish.
  • Restores moisture: Our fingernail hardener formula hardens the nail plate so the nail can restore its normal growth and get stronger. Helps keep nails moisturized for clean, healthy-looking hands and shiny, soft nails.
  • Super absorbent: Absorbs quickly to penetrate the nail and get to work strengthening your nails. Fortifying care for both fingernails and toenails to get healthy and flexible nails.
  • How to use: Apply to clean, polish-free nails from the center of the nail to the tip. Leave on to penetrate. Use 2 times a week until nails have hardened and then 2-3 times per month once nails have recovered. Protect cuticles and skin around nails with grease or oil before application. Never apply under nail tips, on cuticles, on skin, this is to avoid skin hardening.
Check Stock

NATIONAL NAIL 92242 Pro-Fit 0092242 Heat Treated Pole Barn, 7 Ga X 6 in, Steel, Galvanized Hardware-Nails

  • Galvanized ring shank nails Comply with the ASTM standard specification F1667 for post-frame ring shank nails.
  • The product is manufactured in United States.
  • Safety glasses recommended when driving Hardened nails.
Check Stock

Klein Tools J20017NE Heavy Duty Lineman s Pliers with High leverage Design Heavy Duty Comfortable Handles and Knurled Jaws 7-Inch

  • Pliers with heavy-duty induction hardened cutting knives cut ACSR, screws, nails and most hardened wire.
  • Innovative dual material Journeyman grips for comfort and long life.
  • Induction hardened cutting knives for long life.
  • Hot riveted joint ensures smooth action and no handle wobble.
  • Forged in the USA with custom, US-made tool steel for maximum durability.
Check Stock

DEWALT Drill Bit, Ship Auger, 1 Inch x 17 Inch (DW1687)

  • Fast material penetration with self-feed spur.
  • Quick bit changes with a 7/16" ball groove shank.
  • Self feed spur for fast material penetration.
  • Dual cutting edge for maximum durability in nails.
  • Hardened alloy steel provides superior bit life.
  • 7/16-inch ball groove shank allows for quick bit changes.
Check Stock