Categories

Best Hardened Steel Shank

Accusize Industrial Tools ER40 Collet Chuck Extension Rod, 2.56 in. Shank Length, 1 in. Straight Shank Alloy Steel, 0223-0213

  • Made of high-quality alloy steel. Hardened to HRC 56-60.
Check Stock

Yonico 43031S 2-Inch Diameter Steel Forstner Drill Bit 3/8-Inch Shank

  • This steel forstner bit has a 2" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks..
  • Drill clean and accurate holes in solid wood, plywood and MDF.
  • Constructed from high-speed-steel for quality and longevity.
  • The 3/8" shank is compatible with all standard drill and drill press chucks.
  • Hardened steel constructions for increased rigidity.
Check Stock

Yonico 43015S 1-Inch Diameter Steel Forstner Drill Bit 3/8-Inch Shank

  • This steel forstner bit has a 1" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks..
  • Drill clean and accurate holes in solid wood, plywood and MDF.
  • Constructed from high-speed-steel for quality and longevity.
  • The 3/8" shank is compatible with all standard drill and drill press chucks.
  • Hardened steel constructions for increased rigidity.
Check Stock

5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 2pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

  • Cobalt Steel – Manufactured From M35 5% Cobalt Steel, With Molybdenum And Cobalt Added To Creates A Hardened Alloy, Measuring Rockwell Hardness Up To 65, For Much Faster Cutting And Extra Longer Life Span, With Up To 10 Times When Compared with an Average HSS Drill Bit..
  • HSS Titanium Coating – Classic HSS Construction With Titanium Coating For Capability And Durability. The Cutting Edge Is Hardened And Honed For Sharpness..
  • Flutes Form – 2 Flutes Form Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean..
  • Straight Shank And 135° Point Angle – Straight Shank For Standard Drill Chucks And Collet Chuck To Hold Firmly, Assuring Accurate Centering.
  • Helical Flute For Swarf To Easily Get Out.
  • Ideal For General Purpose Drilling Applications..
  • For Metalworking – Particularly Successful In Cutting Through Hard Metals(Hardness Less Than Hrc38°) Such As Stainless Steel And Cast Iron, Although They Can Be Used For Softer Materials Like Copper And Aluminium, Too. Not For Hardened Steel And High Carbon Steel..
Check Stock

LEATBUY Router Bit Set 1/4-Inch Shank 2 PCS Tongue and Groove Floor V-Notch Wainscotting Flooring Matched Router Bits Set with Edge Banding 1/4-Edge

  • ※※【Premium Size】--45 degree Router bit 1/4 "X 1-1/8". 1/2" Shanks.Create tongue and groove joints for wood flooring. This set will cut....
  • ※※【Smooth & Sharp Cutter】--Carbide cutters,featured with double flutes, straight shank, Solid hardened steel bodies with Anti-Kickback Design,....
  • ※※【High Quality】--Using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. Strong and durable.....
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

ECM Moore Snap-On Mandrel RA #2

  • DENTAL MANDRELS FOR RUBBER POINTS HP SHANK.
  • For use with felt points and felt cylinders.
Check Stock

Dremel 9904 Tungsten Carbide Cutter

  • Use on Hardened steel, fired ceramics and other hard materials.
  • Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
  • For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit.
Check Stock

Carbide Burr Set, Tinpec Double Cut Cutting Burrs with 1/8\ Shank & 1/4\ Head, Tungsten Steel Die Grinder Bits for Woodworking, Drilling, Metal Carving, Engraving & Polishing – 10PCS

  • ✔【DIE GRINDER Cutting Burrs】: Carbide burrs casted from Tungsten Steel with amazing HRA003e85. Cutting Burr Demensions: Length:45-50mm, Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • ✔【SHARP DOUBLE CUT】: With grooves evenly crossed, Tinpec double cut cutting burrs are 2x sharper and faster, perfect for all materials like wood, plastic, steel, stone, ceramic and aluminum..
  • ✔【1/8” Shank】: With widely adopted 1/8” shank, Tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools. Fast and smooth centering with the three jaw chuck..
  • ✔【LONG SERVICE LIFE】: Thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel..
  • ✔【PROJECT HELPER】A clear storage case comes with the carbide burr set for easier storage and access. A smart choice for your DIY, engraving, polishing, woodworking and carving projects..
Check Stock

COMOWARE Impact Screwdriver Bit Set with Titanium Drill Bits - Quick Release Twist Drill Bit Set with Tough Case, Impact Driver Bit Set Total 35Pcs

  • ...sed on electric screwdrivers, hand screwdrivers, cordless drills, electric drills, air drills and so on. The bits are also impact-rated and for use in ¼” hex impact drivers (sold separately)..
  • 【HSS-Ground Titanium Coating】Classic HSS construction with titanium coating to sustain long life. The cutting edge is hardened and honed for drilling accurate and clean holes in metal, wood and plastic, Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel..
Check Stock

Lixuu HSS Extra Long Twist Drill Bit,6mm Diameter Extra Long For Electric Drills 350mm

  • M35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc..
  • High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance..
  • Reduced shank drill expands the size range capacity of a portable drill chuck..
  • Common flute and overall length for minimal adjustment during tool changes..
  • Suitable for wood, aluminum, plastic and other materials drilling..
Check Stock

2 Pack Deburring External Chamfering Tool Chamfer Tool Deburring External Drill Bit Metal High Speed Remove Burr Tools Silver- （Hen Shank

  • Deburring Tool : Used for repairing damaged bolt, safely and effectively to remove burrs without hurting your hands by layer.
  • Applicable Size : Fits for (approx.) 5/16-32 bolts (.164) up to 3/4″-10 (.750) - (8mm -19mm).
  • Super Durable Hard Steel - Made of extremely hard stainless steel with high strength and hardness for durability.
  • Universally applicable : Hexagon Shank and Triangle Shank chamfer tool can be used in the same chuck drills.
  • Widely Used : Effectively used in Stainless Steel bolt, Hardened Steel bolt, Mild Steel bolt, Copper bolt, Brass bolt, Aluminum bolt, ect..
Check Stock

Micro 100 T-111 Cut Off Tool - T Style - Regular - Brazed 1/8 Width 3/4 Length 7/8 Square Shank Height 6 OAL Uncoated

  • Double end " T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock