Categories

Best Hardness Machine

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ...ner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the bar increases the anti-vibration capability of the boring bar..
Check Stock

Sinoblu 1/2 to 1/2inch Flexible Spider Couplings for Servo Stepper Motor Diameter 30mm Length 35mm

  • Size：Diameter 30mm Length 35mm/Diameter 1.18inch Length 1.38inch. Bore 12.7-12.7mm/0.5-0.5inch. Type: Plum shaped.
  • Material: Using Aviation Aluminum with corrosion resistance High Hardness, High Precision, Anodized Surface Treatment, Strong and Durable. Spider Material (Elastomer) Uses T-PUR, Longer Service Life.
  • Super Torque: Can Absorb Vibration, Appropriate a Large Torque Transmission.High Hardness,Durable,and Excellent Response,Not Easy to Loosen.
  • Vibration-damping: Flexible Spider Couplings Offset Angular, Radial and Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock and Torsional Vibrations in The Drive Train.
  • Wide Range of Usage: Flexible Couplings is Suitable to Offset Axial, Radial and Angular Displacements and Dampen Vibrations and Torque Shocks for 3D Printer DIY Encoder CNC Router Machine Servo Stepped Motor and Engraving Drilling Milling Machine.
Check Stock

Hand Press Grommet Machine Tarp Grommet Tool Kit Heavy Duty Grommet Press with Punch Hole Tool,Rubber Hammer,3 Dies (#0#2#4),3000Pcs Sliver/Gold Grommets(1/4 3/8 1/2 inch)

  • 【 Wide Applications 】Hand press eyelets and grommets machine is used for fabric, Banners, Signs, Awnings, Posters, Curtains, leather kit, Digital Printing, Scrapbooking, Corsets, Belts, Bags making, Shoes, etc..
  • 【What You Will Get 】Package include: 1pcs Heavy Duty Hand Press Eyelet Grommet Machine, 3Pcs Dies (#0: 1/4", #2: 3/8", #4: 1/2") and 3000Pcs 3 Sizes (6, 10, 12mm) Sliver/Gold Grommets, 500Pcs for each size and each color and 1 piece double heads rubber hammer..
  • 【High Hardness Material】Compare to other products, our Hand Press Eyelet Grommet Machine is made of high-quality heavy duty steel, sturdy and durable. High hardness and high precision help you to accomplish any artwork you want..
  • 【Easy Operation】3 Interchangeable Dies & Grommets for meeting different needs. 12” extra-long handle for convenient pressing and labor-saving, Press the Lever, which as simple to use as a stapler..
  • 【Compact &Tabletop Use】The whole size: 7''*8''*12.4''. The compact size can saving work space and easy to store. There are 3 mounting holes on the base, you can use screws to mount the machine on the table..
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

BestEquip Commercial Meat Cutter Machine 1100 LB/H 3mm Stainless Steel with Pulley 600W Electric Food Cutting Slicer for Kitchen Restaurant Supermarket Market

  • Commercial Meat Cutter: Stainless Steel Meat Cutter Power: 500W, Rated Motor Frequency: 50HZ.
  • External Hanging Blade: The blade is designed by external hanging style which is convenient for washing and can your sanitation. And the knife unit....
  • Protection Button: The food and meat cutter has safe protection button , when the machine is exposed , the machine is automatically locked that....
  • Stainless Blades and Worm Gear Transmission: The blades adopt special stainless material which hardness can reach to the hardness of 52 degree . It....
  • Widely Applications: The electric meat cutter perfect for small catering industry and meat processing business, kindergarten and small refectory .....
Check Stock

PVC Cutter 2-1/2\

  • ...designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry or store..
Check Stock

HayWHNKN Commercial Ice Cream Machine 3 Flavor Soft Serve Electric Stainless Steel Ice Cream Maker Frozen Yogurt Gelato 18L/H 110V 1200W

  • 【Easy to Use】LED display, can show the making number,hardness,temperature.With water box and detachable water plate to prevent water and ice cream fell to the ground, easy to clean..
  • 【Good Cooling Effect】The ice cream machine adopts efficient full brass condenser and fluorine free high performance compressor,quickly cooling speed and good stability,ensure cooling effect and evenly heat dissipation..
  • 【Different Hard】The hardness of the ice cream can be adjust.It's easy to operate, very convient..
  • 【Save Energy&Safeguard】High efficiency, energy saving, save electricity 40%.Small size, large output.High & low voltage protection and warning device.High force beater motor but low noise..
  • 【Paramter】3 Flavor Soft Ice Cream Machine，Power : 1200W，Capacity :4.5L*2，Output : 16-18L/H，Refrigerant : 410a，Voltage : 110V/ 60Hz.
Check Stock

tianbonsai Tools Branch Cutter 205 Mm (8\) Staight Edge Alloy Steel Master's Grade

  • Quality: master's grade, handmade by the master worker from TianBonsai, have the best quality in our tools..
  • Material detail: the Branch Cutter, manufactured via 5Cr15MoV stainless steel..
  • Hardness detail: Branch Cutter was differential heat treatment by the high frequency machine, the working edge's hardness is over HRC58..
  • Quality Assurance: 3 Years, if the tools have problems for use, we will repairing it for you without any fee, you just need to sending it to us..
Check Stock

20Pcs Forstner Drill Bits, Rocaris Tungsten Steel Woodworking Hole Saw Set, Wood Cutter Auger Opener Round Shank Drilling Cutting Tool (14mm-50mm)

  • 【High Quality Material】:The forstner drill bitsare made from tungsten steel and being hot-treated,sharp edge, high hardness, accurate positioning,high precision,smooth cutting,impact resistance,high toughness.more smooth,less noise..
  • 【Various Sizes】: 14mm(0.55''), 15mm(19/32"), 16mm(5/8"), 17mm(43/64"), 18mm(45/64"), 19mm(3/4"), 20mm(25/32"), 21mm(53/64"), 22mm(55/64"), 23mm(29/32"), 24mm(15/16"), 25mm(1"), 26mm(1-1/16"), 28mm(1-1/8"), 30mm(1-3/16"), 32mm(1-1/4"), 35mm(1-3/8"),40mm(1-3/5"), 50mm(1.96'') which can meet your various needs in this professional set..
  • 【Great performance】Sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting, high toughness. Forstner Drill Bits can drill clean flat bottom holes with no chipping..
  • 【Widely Used】:Drilling Counterbore can be used in wood drilling, installation of a spherical door slightly、 the drawer slightly、plastic products and gypsum board. Safer and more accurate to use this drill bit in a drill press..
  • 【Application】：Suitable for pistol drill, bench drill, vertical drilling machine hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine,etc..
Check Stock

Knob Cutter Concave Cutter Tian Bonsa Tools Master Quality Stainless Steel 205 Mm 8

  • Quality: master's grade, handmade by the master worker from TianBonsai, have the best quality in our tools..
  • Material detail: the Knob Cutter, manufactured via 5Cr15MoV stainless steel..
  • Hardness detail: Knob Cutter was differential heat treatment by the high frequency machine, the working edge's hardness is over HRC58..
  • After-sales service： if the tools have problems for use, we will repairing it for you without any fee, you just need to send it to us..
Check Stock

TECHTONGDA Soft Ice Cream Machine Commercial 3 Flavors Ice Cream Cones Making LCD Display 1400W 20-30L/H

  • 【3 Flavors 】The Commercial Soft Serve Ice Cream Machine offer three flavors-2 single flavors and 1 mixed flavor to meet different tastes..
  • 【With Two 4.3L Pans】 The two material pans are made of food grade stainless steel with transparent covers equipped. The volume of each pan is 4.3L..
  • 【Adjustable Hardness】Apply mico-computer controlled system with LCD display which is easy to operate. The hardness of the ice cream can be adjusted, from 4.0 to 7.0 ( suggesting 5.5)..
  • 【Powerful Compressor】Equipped with thickened copper tube condenser and powerful compressor, features rapid cooling, energy saving, low noise.The the production can reach up to 20-30L/H..
  • 【Excellent Design】The machine is made of stainless steel. With detachable drip tray to aviod ice cream dripping on the table. Equipped with 2 Cone Holders. With large area of vents. Widely applied in restaurants, cafes, snack shops, fast food shops, supermarkets and other places with great needs..
Check Stock

Premium Coil Tattoo Machine - Pro Tattoo Gun Handmade Carbon Steel Shader Liner Classic Coloring 28mm 10 Wrap Coils Supplies Kit for Starter Beginner Tattooist Máquina de tatuajes (Black 3Holes)

  • Tattoo Machine Gun and Random Color Aluminum Alloy Tattoo Machine Grip Tube.Recommended use:Liner or Shader .Easy to handle and control.Wide Compatibility: Work with all standard grips, tubes, needles and 6-8V power supplies with a clip cord..
  • High Quality Tattoo Machine Frame, Made by Alloy with the highest efficiency and low inductance, leads to excellent stability.Hand polish, high temperature treatment.Fast heat dissipation and good performance..
  • 10 Warps Coils,28mm height.Anaerobic copper wire, varnished wire. 【WORK EFFICIENTLY】- Armature bar:42mm, Pure Soft iron.High magnetic conductivity, low-loss.Springs:Blue steel.Good toughness, high hardness.Binding Post:Brass.Good conductivity and strong flapping strength..
  • Armature bar:42mm, Pure Soft iron.High magnetic conductivity, low-loss.Springs:Blue steel.Good toughness, high hardness.Binding Post:Brass.Good conductivity and strong flapping strength..
  • Ship from the US stock, and we support a 90-day no reason replacement or refund..
Check Stock

Commercial 110V 3Flavor Soft Ice Cream Cooling Making Machine 20-30L/H Standing Type(Ite#210051)

  • 【2+1 Flavors】 With two built-in stainless steel containers for three-flavors ice cream making, including two single flavors and one mix flavor. There are two different flavors on the left and right, and the mixed flavor in the middle..
  • 【High-horsepower Compressor】 The ice cream machine uses high-horsepower compressors to achieve rapid refrigeration and rapid discharge, and greatly increase the output per hour.Highest Output is 30L/h. Hardness of ice cream can be adjust..
  • 【Intelligent Control 】Time, temperature, hardness and quantity integrated into one, displayed on one LCD panel. Also with one-click cleaning function and material shortage protection system..
  • 【Different Hard】The hardness of the ice cream can be adjust.It’s easy to operate, very convient..
  • 【Extensive Use】The food grade stainless steel soft ice cream machien can be used to make soft ice cream, yogurt and other sorbets without trivial steps. Widely used in restaurants, cafes, fast food shops, etc..
Check Stock