Categories

Best Harmonic Analyzer

[2022 Upgraded] AURSINC NanoVNA-H4 V4.3 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF 4'' Portable Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

  • ...H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered.
  • ✔️[Improved Frequency Algorithm] The improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
  • The metal shield is designed to reduce the external interference and improve the measurement accuracy.
  • ✔️[Antenna Performance Measurement] The default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
  • ✔️[PC Control] Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for vari....
Check Stock

OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Automobiles & Trucks, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, 6 Piece

  • FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt.
  • Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
  • WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995).
  • EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process.
  • INSTRUCTIONS AND STORAGE CASE INCLUDED: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case.
  • Easily take this harmonic balancer puller set from job to job.
  • PRODUCT SPECIFICATIONS: Includes Puller Body, 3-Jaw Puller, (3) Jaw Retaining Pins, (3) Wave Washers, (4) Pressure Screw Adapter Rods (4.
Check Stock

Analog Discovery Systems Kit: USB Oscilloscope & Logic Analyzer

  • Two-channel USB digital oscilloscope, spectrum analyzer, and network analyzer (±25V, differential, 14-bit, 100MS/s, 30MHz+ bandwidth).
  • Two-channel arbitrary function generator (±5V, 14-bit, 100MS/s, 12MHz+ bandwidth).
  • 16-channel digital logic analyzer, pattern generator, and protocol analyzer (3.3V CMOS and 1.8V or 5V tolerant, 100MS/s).
  • Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS).
  • Additional instruments including a data logger, impedance analyzer, and power supplies.
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
  • A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....
Check Stock

Dorman 594-006 Harmonic Balancer , Black

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

AUTOAND GM Harmonic Balancer Remover Puller, Automotive Replacement Engine Harmonic Balancer without Tapped Holes, Crank Pulley Puller Compatible with Ford Coyote 5.0

  • [QUICK & SAFE] GM harmonic balancer puller kit is intended to quickly and safely remove harmonic balancers without tapped holes. This tool features a "clip-in" design allowing removal without bolting the puller to the balancer. The harmonic balancer without threaded holes can also be easily removed..
  • [APPLIACABLE VEHICLE] The harmonic balancer puller tool is compatible with GM models: 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0 L. Compatible with Chrysler, Jeep, Dodge models: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8..
  • [INAPPLICABLE VEHICLES] This tool is not applicable to 1997 or earlier GM LT (5.7L LT1003c4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley. (If you have any issue, please feel free to contact us by email).
  • [EASY TO USE] Lubricate and tighten the pressure screw, after inserting the jaws into the spokes, turn them carefully clockwise to engage the harmonic balancer. Tighten the pressure screw to reach the crankshaft, finally use a wrench or a ratchet to turn the compression screw carefully until the harmonic balancer is removed..
  • [HIGH QUALITY] The harmonic balancer removal tool allows you to complete the work faster and save your time, w....
Check Stock

CardioChek Cholesterol Test Strips, 3-Count Containers by CardioChek

  • Must have CardioChek Analyzer (sold separately).
  • Includes 3 Total Cholesterol test strips, 3 lancets, 3 capillaries, and 1 memo chip.
  • Make sure analyzer date is set correctly, see analyzer user guide page 18..
  • Always use the MEMo Chip shipped with the test strips, see analyzer user guide page 10..
Check Stock

Dorman 594-321 Engine Harmonic Balancer for Select Dodge Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-012 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-209 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-017 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-002 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-148 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock