Categories

Best Hastelloy Plug Valve

HQMPC RV Winterize Adapter Blowout Adapter 1/4

  • After sale service: If you have any questiosn fit our products, please contact service team, we will solve problems in time..
  • Easy operation quick adapter fitting, screw the water lines to the female or male threading side, then connect the quick plug to an air compressor line’s female quick coupler. Turn on the air compressor, rotate around ball valve’s stem to open/close and modulate the air flow velocity to blow out the water from the water lines..
  • Standard threading connector, 1/4″ quick connect air plug with 3/4″ GHT (male and female) Valve.
  • Products use:This Winterize Blowout Adapter Connected with air compressor to press out the hose line water aviod inside water blow out the water line in winter , irrigation systems, RV, travel trailer, boat, camper, cabins, faucets, garden hoses.
  • Packing Including: One Pcs 1/4″ Quick Connect Plug With 3/4″Female Valve,One Pcs 1/4″ Quick Connect Plug With 3/4″Male Valve, 4 Gaskets +1 Seal Tapes.
Check Stock

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
Check Stock

2Pcs Spitfire Tube Valve Replacement Kayak Intex Inflatable Boat Replacement 0ne-Way Inflation Boat Spiral Air Plugs for Inflatable Raft Boat Kayak

  • PREMIUM MATERIAL: Spitfire Tube Valve Replacement is made of high dense ABS plastic, this Air Valve is sturdy, and durable..
  • ONE-WAY INFLATION: The Kayak Intex Challenger Plug Replacemnet is a one-way inflation valve, good for quick inflation..
  • Hat DESIGN: The valve hat design ensures anti-leak inflation. Please check size to make sure whether your valve bung fit this plug before purchase.
  • COME IN PAIR: Intex plug comes in pair, fit to most inflatable boat, raft, rubber dinghy, etc..
  • GUARANTEE: If you have any problem with this product, you can just take advantage of our 180 days warranty. We will replace it or give your money back....
Check Stock

EVIL ENERGY Diesel Fuel Rail Pressure Plug Valve Compatible with Dodge 5.9L Cummins 2003-2007 213072800

  • INSTALLATION SITE AND FIT- EVIL ENERGY Fuel Rail Plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve.Compatible....
  • Eliminate your stock pressure relief valve with this Fuel Rail Plug, which also prevents high-pressure fuel from being returned to the fuel....
  • APPLICATION-This is for maintaining fuel rail pressure under heavy acceleration. Also prevents bleed off overnight if the stock valve is stuck open or....
  • RIGID STEEL CONSTRUCTION: Each Fuel Rail Plug is constructed of stainless steel to avoid cracking and excessive heat expansion.Effective....
  • Weld-free construction that gives Fuel Valve better leakproofness.Threads in perfectly and doesn't leak..
Check Stock

OEMTOOLS 25029 Flexible Air Valve Holder Hose 14 Length Fits 14mm and 18mm Spark Plug Holes Valve Spring Tools for Air Compressor

  • SAVE TIME AND PREVENT STRESS: Replace valve springs or valve stem seals without removing the engine head.
  • FITS MOST VEHICLES: This air holder fits engines with either an 18mm or 14mm spark plug socket size, making it compatible with the most common....
  • MORE ROOM TO WORK WITH: Easily connect the valve hose to the spark plug hole with the flexible 14 inches of hose, which is longer than some....
  • THE EASY WAY TO DO ENGINE VALVE WORK: While attempting a valve spring removal or valve seal removal, use this valve holder tool to blow compressed air....
  • AN ESSENTIAL PART OF A VALVE SPRING KIT: Unless you are a hobbyist wanting to take apart an engine head for educational or recreational reasons, air....
Check Stock

Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temp....
Check Stock

Lisle 19700 Valve Holder black

  • Commonly used when valve springs or valve stem seals are replaced.
  • Comes with two-step fitting for both 14 millimeter and 18 millimeter threads.
  • Thread fitting to spark plug hole and other end to air supply.
  • Heavy duty 12" flexible hose allows easy access to spark plug hole and air supply.
  • Air pressure helps prevent the valve from falling into the combustion chamber.
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

Yaeccc 4500PSI Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
Check Stock

GROHE 35115000 GrohSafe 3.0 Pressure Balance Valve Rough with Flush Plug with Elbows with PEX Crimp Outlets with Service Stops, Unfinished

  • PEX elbow connections for easy installation without adaptors, reducing leak points.
  • Valve can be easily rotated 180° to accommodate supply lines from floor or ceiling.
  • Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim).
  • Can be tested using flush plug with air (200 psi) or water (300 psi).
  • Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws.
Check Stock

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock