Categories

Best Hdd Power Switch Control

Geekworm X832-C1 Metal Case Compatible with Raspberry Pi 4 & X832 V1.2 3.5 SATA Storage Board & X735 Power Management Board Not Support X832 V1.0/X835

  • [HDD thickness]Support Max. 26.1mm thickness 3.5" SATA HDD installation, support 17.8mm & 26.1mm 3.5" SATA HDD.
  • Case Dimensions(Installation): 168x104x75mm / 6.61x4.09x2.95(inch).
  • We do not open the TF card slot on the front for....
  • When use with X735 board, the power supply MUST only be connected to X832 DC5521 12V IN port NOT X735..
  • Packing List: 1x X832-C1 metal case for X832 V1.2, 1x power control switch,1x cooling fan, 1x Installation screws pack.
Check Stock

GODO USB 3.0 to Dual Bay External Hard Drive Docking Station with UASP 5Gbps for 2.5 / 3.5 inch SATA HDD SSD, Support Offline Clone/Duplicator Function & 2 x 12TB ,with LED Indicator & Tool-Free

  • GODO Dual bay hdd docking station supports all 2.5”/ 3.5” SATA I/II/III HDD SSD, Support 2×12TB ,Compatible with Windows,Mac Os,Linux..
  • GODO HDD Dock support USB 3.0 UASP acceleration protocol, effectively improve transmission performance. Data transfer rates up to 5Gbps (Write and Read up to 400 MB/s), backward compatible with USB2.0 and 1.1..
  • GODO Online Disk Duplication as external storage, or Offline Clone, one-click to achieve whole disk cloning without connecting a computer. With LED indicator, Hot-swappable, Tool-free..
  • GODO Two-slot USB3.0 clone duplicator support plug and play! No software, drivers or complicated installation required. Built-in power control switch, highly efficient (DC 12V, 2.5A), stable and reliable power source guarantees a steady supply of energy..
  • Package Includes: USB 3.0 HDD SATA Docking Station x1.
Check Stock

Desktop Computer Power Switch Power Supply Cable, AZMXDVP External Remote Start PC Motherboard Power ON/Off Switch Button Extension Cable 2M Length-M20

  • 1.External Desktop PC ON/OFF Switch: 2Meter long cable PC power switch Control, the computer becomes easier even your computer in a hard to reach place, Bring your much convenient.
  • 2.Mechanical shaft key switch and colorful gradient light : The mechanical axis key as same as the ON/OFF button, same as pressing the mechanical axis keyboard.
  • coupled with colorful gradient lighting effect, gives you a different power controll experience..
  • 3.Easy to install: the package comes with installation instructions. Just connect the POWER SW and +HDD- connectors with motherboard and stick the adhesive plate in the right place.
  • 4.Small and Portable Design: M20 weight only 28 gram,1.5cm thickness in the size ,Suitable for Household, Office, Hotel, Internet Bar, etc. There is a strong double-sided tape at the bottom ensure it can be fixed on the table.
  • 5.Package included: Desktop computer power switch with 2M cable * 1, Power SW splitter * 1,Invisible double-sided adhesive pad * 2, Cable tie * 2.
Check Stock

Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
  • WiKi for reference: wiki.geekworm.com/T300.
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).
Check Stock

Coolgear USB 3.0 to PATA and SATA 3.5 and 2.5 inch Hard Drive Adapter

  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector..
  • Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1..
  • Included 12V 2A power cable is for providing stable electricity supply. Note: 4PIN Power Cable is designed for 3.5’’ IDE drive, SATA drives are not applicable and unnecessary..
  • On/Off Switch for HDD protection. LED light shows power and activity status..
  • What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..
Check Stock

Wavlink USB 3.0 to SATA Dual Bay External Hard Drive Docking Station for 2.5/3.5 Inch SSD HDD SATAⅠ/Ⅱ/Ⅲ Support 2×10TB 6Gbps &UASP with Offline Clone/Backup Function

  • Supports all 2.5''/ 3.5'' SATA I, SATA II, SATA III HDD SSD, Support 2×10TB hard drivers with UASP protocol,Compatible with Windows,Mac Os,Linux..
  • Super speed USB3.0 interfaces with data transfer rates up to 5Gbps.
  • 10 times faster than the traditional USB 2.0. SATA-III internal.
  • Standalone duplicating / Offline Clone operation with LED indicator, hot-swappable, Tool-free,plug and play, no drivers needed.Offline data copy....
  • Highly efficient (12V, 3A), stable and reliable DC power source guarantees a steady supply of energy.
  • Package Includes: 1x USB 3.0 HDD SATA Docking Station.
Check Stock

Geekworm NASPi Gemini Dual 2.5'' SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On & RAID Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

  • 【Function】Raspberry Pi 4 Dual SATA SSD Case Kit With safe shutdown, auto power on and RAID function. With 4010 PWM cooling fan, UASP supported Only..
  • 【Wifi Description】Because the shielding of the metal cases will cause the loss of 2.4G wifi signal, only recommend to use Ethernet or 5G WiFi..
  • 【Button Switch Operation】Press to turn on.
  • Press and hold for 1~2 seconds to reboot.
  • Press and hold for 3 seconds to safe shutdown, Press and hold for 8 seconds to force shutdown (need to install shell script firstly).
  • 【Packing List】1 x NASPi Gemini Metal Case.
  • 1 x X882 V1.3 Dual 2.5'' SATA HDD Shield.
  • 1 x 3pin 4010 PWM fan with metal bracket.
  • Note: not inlcude Raspberry Pi 4, HDD/SSD or power adapter..
Check Stock

WAVLINK USB 3.0 to SATA I/II/III Dual-Bay External Hard Drive Docking Station for 2.5/3.5-inch HDD/SSD with UASP (6Gbps)?Support Offline Clone Duplicator Function (2 x 12TB)

  • Supports USB 3.0 external, SATA-III internal.
  • Works great with 2.5 inch and 3.5 inch SATA HDD/SSD USB 3.0 super speed supports UASP for even faster data transfers..
  • Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD.Compatible with Windows,Mac Os,Linux.
  • Offline data copy between two hard drives with no computer involved. A competent assistant for data backup. Tool-free, no driver needed. Hot-swappable, plug and play!.
  • Highly efficient (12V, 3A), stable and reliable DC power source a steady supply of energy.
  • Automatic sleep mode after 30 minutes of inactivity saves energy..
  • Support transfer speeds up to 6Gbps by UASP transfer protocol, which is up to 20% faster than USB 3.0. Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1).
  • Tool-free installation on Windows 10 through XP, Mac OS X, and Linux / Unix, Support hot-swapping and easy set up.(No drivers are required for the disk dock itself as it uses the standard USB Mass Storage class).
  • Package Includes: 1x USB 3.0 HDD SATA Docking Station.
Check Stock

Norco 4U Rack Mount 20 x Hot-Swappable SATA/SAS 6G Drive Bays Server Rack Mount RPC-4020

  • 20x hot-swappable SATA (I or II) / SAS drive bays Supports up to twenty 3.5" SATA (I or II) or SAS disk drives.
  • 1 x slim CD-ROM bay,1 x FDD bay, 20 x 3.5 " hot-swappable drive bays , 1 x HDD bay Hot-swappable HDD tray with special designed power-off and lock mechanism..
  • Support EEB (12"x13"), CEB(12"x10.5"), ATX (12"x9.6"), Micro ATX (9.6" x 9.6") motherboard, Screwless top cover.
  • Seven ball bearing fans for better ventilation 5 x 80mm middle fans, 2 x 80mm rear fans Switch:Power ON/OFF x 1, System reset x 1 Indicator:Power ON/OFF x 1, HDD x 1, NETWORK X 2.
  • Power Supply Options:Standard ATX, mini redundant power supply Dimensions ( W x D x H ):19" x 25.5" x 7 " (483mm x 650mm x 176mm)Packing:Double boxes.
Check Stock

USB 3.0 Switch Selector 4 Port,MLEEDA KVM Switcher 4 Computers Sharing 4 USB Devices,USB Peripheral Switcher for Keyboard Mouse Printer Scanner,with Wired Remote Button and 4 USB 3.0 Cable

  • ...er rates of up to 5Gb/s (10 times faster than USB 2.0). The mouse keyboard switch is backward compatible with USB 2.0 & USB 1.1 peripherals. Support wireless keyboard and mouse..
  • 【Wired Remote & Button Switching】You can easily switch between 4 computers by pressing the button or pressing the Wired Remote control, green LED indicating the active computer. The included wired remote(1.5m) lets you say goodbye to messy cables on your desk..
  • 【Good Compatibility & Stable Connection】USB 3.0 switch selector with separate micro USB port for power supply,driver-free, plug and play.Compatibility with Windows 11/10/8/7/Vista/XP and Mac OS, Linux, and Chrome OS..
Check Stock

USB Switch 3.0, 2 in 4 Out USB Switcher 2 Computers Share 4 USB Peripheral KVM Switch Keyboard Mouse Splitter

  • 【2 in 4 Out USB Switch】: This 4 Port USB Switcher allows 2 computers to share 4 USB peripheral devices without constantly pulling cables or setting up complicated network sharing software. You can use the same keyboard, mouse, or other USB devices to control two pcs with a one-key switch.
  • 【Transfer Speed up to 5Gbps】: The keyboard mouse switch supports ultra-fast USB 3.0 data transfer rates of up to 5Gb/s (10 times faster than USB 2.0), is backward compatible with USB 2.0 and USB 1.1 devices, Increased work efficiency.
  • 【Widely Compatibility】: Just Plug and Play, easy to install, no extra drivers& no software required. Compatible with Windows 10/8/8.1/7/Vista/XP(32-bit / 64-bit) and Mac OS X, Linux, and Chrome OS system.
  • 【One-button Switch】: Easy to use bi-directional (2 to 4) KVM switches. Just press the top button to switch between the two. Indicator light moves from 1 side to the other, blue LED indicator on the switch will indicate the running computer, reduce repeated plug and unplug, offer you a USB KM solution.
  • 【Stable Connection】: USB 3.0 sharing switch with a separate micro-USB female port for option power, which optimizes its compatibility with more devices, Freely connect more USB devices of high power consumption such as HD....
Check Stock

Geekworm X825-C8 (X825 V2.0) Metal Case+Power Switch+Cooling Fan Support X825 V2.0 2.5 inch SATA SSD/HDD Shield & Raspberry Pi 4 Model B & X735 Only(Not Include RPi4&X825 V2.0&X735&PSU&SSD&TF Card)

  • New X825-C8 metal case with power switch and cooling fan specially designed for X825 V2.0 (ASIN:B091JSRQ9C)& X735(ASIN:B07R45W1LN),NOT support X825 V1.5 version.Recommend to use with X735 power management board (X735(ASIN:B07R45W1LN.).
  • X825-C8 case Only compatible with X825 V2.0, NOT support X825 V1.5 version. User Manual refer to Geekworm WiKi search X825-C8.
  • We found that USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So when install the Raspberry Pi 4 in the case, if you find the 2.4G signal is unstable, please try to use WIFI 5G AP. (Please refer to WiKi X825#Document).
  • Also the Bluetooth signal will be affected if use the metal case..
  • Support Max 9.5MM thickness 2.5 inch SATA HDD/SSD installation；.
  • Packing List: 1 x X825-C8 Metal Case, 1 x Power Control Switch, 1 x 4010 Cooling Fan(with 4 pieces of screws), 1 x Mounting Screws Pack. Packing List not include the Raspberry Pi 4, X825 Board and 2.5 inch SATA SSD/HDD..
  • Important: The X825 V2.0 2.5" SATA Shield(ASIN:B091JSRQ9C)& X735 Power management board(ASIN:B07R45W1LN) need to purchase seperately..
Check Stock

SATA/IDE to USB 3.0 Adapter, Unitek IDE Hard Drive Adapter for Universal 2.5\/3.5\ Inch IDE and SATA External HDD/SSD, Support 10TB

  • 【Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【Stable Power Supply】Included 12V 2A power cable. 4PIN Power Cable is designed for 3.5’’ IDE drive..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【Driver Free】Plug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. On/Off Switch for HDD protection. LED light shows Power and Activity status..
  • 【What We Offer】SATA/IDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1.
  • 24h-friendly customer service and email support..
Check Stock