Categories

Best Hdpe Pipe Set

Premium USA Made 6' Inch Outdoor Round Atrium Drain Grate Cover - Fits All 6' Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Landscape Pipe 6' (Black)

  • FIT : Fits All 6" Inch Sewer & Drain Pipe / Fittings, Also Fits Triple Wall Pipe & Corrugated Pipe 6".
  • PREMIUM QUALITY - manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. This grate is designed with large opening slots for maximum flow while still preventing large debris from entering the drainage system. Capable of withstanding pedestrian, bicycle and wheelchair traffic..
  • EASY INSTALL - Precision engineered and manufactured to attach directly to Sewer and Drain Pipe and Fittings, Triple Wall Pipe and Corrugated Pipe. Easy to use, installs in minutes and blends well with the landscape..
  • FITS MOST BRANDS - COMPATIBLE WITH NDS, DURA, ETC..
  • APPLICATION - Typical application would be for direct attachment to Drainage Pipe where a catch basin is not appropriate or feasible. Available in 3″, 4″ and 6″ diameters..
  • ADA compliant - recommended for pedestrians, bicycles, and wheelchair traffic.
  • EXACT FIT: 6” Sewer Pipe (ASTM D3034, SDR 35), 6” S and D Pipe (ASTM D2729), 6” Corrugated Pipe, 6” S and D Fittings (SDR 35), 6” Round Catch Basin..
Check Stock

Zurn GT2700-25-3NH - Grease Trap Interceptor, 3 In, 25 GPM

  • HOW IT WORKS - Standartparks innovation of grease trap works on the FOG principle (fats, oils & grease) float on the water and solid particles are actually trapped by the included sediment basket..
  • The sediment basket (included) separates all debris from entering water and grease (only one in the market with this).
  • HIGH QUALITY HDPE allows for hot and cold temperatures in your installation and use. Anti - rust, anti corrosion, non deformation long service life. Flow speed up to 5 gallons per minute. The only one capable of this in its size.
  • Included wheels (another only of its kind) allow for quick and easy removal. No more having to empty in a specific area. You can disconnect and wheel out to your release area with ease. Stainless steel cast design with rubber wheels allows for quick and easy removal, smooth and simple..
  • EASY TO SETUP - comes completely assembled and could not be easier to install in your industrial / home set up. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain! The quick release tight spout is there also for easy removal..
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

SharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U370LFZ and U370LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U362LFZ and U362LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Grease Trap plastic - Grease Interceptor - Grease Traps For Restaurant, Cafe, Factory - 20 Lb Grease Trap Interceptor - 10 gpm Grease Trap For Restaurant - Tickness 6mm - Home Kitchen Grease Trap

  • HOW IT WORKS - Standartparks innovation of grease trap works on the FOG principle (fats, oils & grease) float on the water and solid particles are actually trapped by the included sediment basket..
  • The sediment basket (included) separates all debris from entering water and grease (only one in the market with this).
  • HIGH QUALITY HDPE allows for hot and cold temperatures in your installation and use. Anti - rust, anti corrosion, non deformation long service life. Flow speed up to 5 gallons per minute. The only one capable of this in its size.
  • Included wheels (another only of its kind) allow for quick and easy removal. No more having to empty in a specific area. You can disconnect and wheel out to your release area with ease. Stainless steel cast design with rubber wheels allows for quick and easy removal, smooth and simple..
  • EASY TO SETUP - comes completely assembled and could not be easier to install in your industrial / home set up. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain! The quick release tight spout is there also for easy removal..
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

ALSKAR DIAMOND ADTVBT 8 inch All Purpose Metal Cutting Dry or Wet Cutting Segmented Diamond Blades for Metal and Plastic Materials (8\)

  • All purpose. Used to cut many metal and plastic materials (angel iron, rod, rebar, iron bars, ductile pipe and cast iron, HDPE and PVC plastic pipe, metal roof deck, metal sheets, copper tubes, perlings, drywall studs) and concrete and asphalt..
  • Vacuum-brazed segmented bladewith the rescue/fire/accident designation.
  • It is equivalent to 80-100 pieces of Abrasive metal cutting blades. Unlike traditional abrasive discs that shrink with use, this blade maintains its size and consistent cutting depth..
  • Size 8"x0.080"x0.315"/8mm. Arbor size 7/8"-5/8"..
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

WO Outdoor Adirondack Folding Chair 2 PC Set Loungers Seats Traditional Retro Outdoor Furniture Aesthetic for Beach, Balcony, Home, Backyard, Lawn, Patio, Pool, Deck, Garden (Navy Blue)

  • ...tiful in so many settings. Whether used near a pool, garden, backyard, patio, terrace, balcony, or green room, this beautiful table and chairs set is just the one you’re looking for! Folding action makes storage a breeze..
  • Premium Materials: Durable long-lasting weather-resistant High-Density Polyethylene Plastic (HDPE). What is HDPE? High-Density Poly Ethylene (HDPE) is a thermoplastic polymer made from petroleum. As one of the most versatile plastic materials around, HDPE plastic is used in a wide variety of applications, including this patio furniture set. Known for its outstanding tensile strength and large strength-to-density ratio, HDPE plastic has a high-impact resistance and melting point.
  • Bright Color Options: A wide array of bright, beautiful, and fun colors to choose from Lime Green, Navy Blue, Pacific Blue, White, Red, Orange, Dark Brown, Weathered Wood, Turquoise, Grey/ Gray, Dark Green, Modern Black, Sand (taupe/ beige), Teak (tan, light brown)..
Check Stock

SharkBite 1/2 Inch x 3/4 Inch MHT Garden Valve Multi Turn Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE 24622LF

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit....
  • COPPER, PEX, CPVC, PE-RT, HDPE: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any....
  • PERFORMANCE: Installing a hose bibb, adapter, connector, spigot, or shutoff, you can rely on a tight union as the pushfit connection bites into the....
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • SharkBite is the only push-to-connect brand than can ensure a clean, leak-free....
  • MADE IN THE USA: All SharkBite connectors, faucets, and adapters are manufactured and tested in the USA.
Check Stock

TratoKS 32 Incl Circle Folding Table Generic Folding Desk Folding Tables Foldable Table Portable Table Foldable Desk

  • Dimension: (31.50 x 31.50 x 29.92)" / (80 x 80 x 76)cm (L x W x H).
  • Color: White Table Top and Gray Plastic-Sprayed Steel Pipe.
Check Stock