Categories

Best Hdpe Pipes Fittings

GeilSpace 6 Pack 3/4\ × 14\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Three Quarters Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (3/4\ × 14\

  • SIZE - 3/4" Steel Pipe, 14 Inches (35.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 3/4" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective paint at both ends makes pipes hard to screw into fittings, please remove the black paint. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 3/4" pipes. (O.D. of these pipes: 25.5mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer t....
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A

  • SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL: SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs.
  • marks the proper insertion depth for SharkBite plumbing fittings.
  • COMPATIBILITY: Deburring tool is compatible with 1/4 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • DURABLE: PVC deburring tool is composed of lightweight and durable plastic.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

GeilSpace 4-Way, Malleable Iron Pipe Fittings - Vintage DIY Industrial Shelving, Industrial Decor, Furniture DIY (3/4\

  • SIZE - 4-Way Fits Standard 3/4" Threaded Pipes and Fittings. NOTE: These items are PAINTED BLACK..
  • MATERIAL & PRODUCTS - GeilSpace Pipes and Fittings are designed with a standard industrial finish.
  • materials and threads constructed from sturdy cast iron.
  • Unlike most other products on Amazon with grey looking and oily surface, our products’ surface is black and clean after high temperature paint, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES – Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs..
  • GUARANTEE&DELIVERY: We promise to provide you with good quality products and services to your satisfaction. If you are not satisfied with our products, 100% guaranteed return of goods. The goods will be sent in 1-3 business days for Amazon Prime Members, and 1-5 bu....
Check Stock

Manufacturer Direct PVC Pipe Schedule 80 Industrial Grade Grey 1/2 Inch (.5) Grey/PVC - 4FT

  • MATERIAL & PRODUCTS - GeilSpace Heavy Duty Pipes are designed with a standard industrial.
  • materials and threads constructed from sturdy metal.
  • our products’ surface is coated with a rust preventive oil during manufacturing process, and you can seal it after cleaning..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find BLACK PAINTED pipes and fittings in our store..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • GUARANTEE - We promise to provide you with good quality products and services to your satisfaction. If you are not satisfied with our products, 100% guaranteed return of goods. We guarantee delivery within 1 to 3 business days for Prime members and 1 to 5 business days for non-prime members..
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF

  • SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Spears 817 Series PVC Pipe Fitting, 45 Degree Elbow, Schedule 80, 2' Socket

  • 45-degree elbow for connecting two pipes or fittings at an angle.
  • Socket ends for connecting to male pipes or fittings.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

NIBCO - K05540C C4807 2 HXH 90 ELBOW PVC, White, 2' (C48072)

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Pipe Décor Desk Outside Leg Set, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, Classic H Design, 28.75-in H x 21.5-in W, 3/4-in Diameter, 2-Pk

  • ...5-in diameter, assembled leg specs 28.25-in tall and 21.25-in wide.
  • Includes 2 “H” table legs comprised of (4) 3/4-in x 8-inch pipes, (4) 3/4-in x 18-in pipes, (2) 3/4 -in x 16-in pipes, (8) 3/4-in round flanges, (4) 3/4-in tees, (16) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade malleable iron and come in a standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock