Categories

Best Head Bolts Fastener

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x1-1/2" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 1-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

License Plate Hardware Kit 400 Screw Variety Pack, Stainless Steel Screws, Nylon Screw Inserts, Black Screw Covers for Fastening License Plates, Frames and Covers EZ458

  • INCLUDES: 50 Thumb Screws 50 Pan Heads 50 Nylon Inserts 50 Hex Head Bolts 50 Hex Slot Head Screws 50 Large Metric Bolts 50 Black Pan Heads 50 Metric Screw Pan.
  • New and Improved Heavy Duty Design - Don't settle for Cheap Imitations -Buy from the Industry Leader ✔️ Quality Guaranteed.
  • EZ Line Product with Over 60 years serving the Auto Dealer Supplies Community..
  • 100% MONEY-BACK GUARANTEE - This fastener kit is backed by our World Class 100% Money-Back Guarantee that you are fully satisfied with your product or receive your money back. All parts in this kit are guaranteed to work and last the lifetime of your vehicle..
  • Screws to fit the front license plate frame as well as the back plate screws. Bolts, screws, and thumb screws to fit your license plate fastener needs. License plate cover screw fasteners with a quality promise we stand behind.
Check Stock

3/8-16 x 1-1/2' Carriage Bolts and Nuts Kit, Round Head Square Neck Screws, Stainless Steel 18-8 (304), 10 Sets

  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
  • Due to the head there is no groove type that can be used with a power assisting tool. It can also be hidden during actual use to prevent disassembly..
  • High Quality Material 18-8 (304) Stainless Steel Carriage bolts Used widely in the home and office appliances, communication equipment, ship assembly, and other machinery industry..
  • Package Included: 10 PCS Carriage Bolts, 10 PCS Hex Nuts and 10 PCS Flat Washers..
Check Stock

(10 pc)1/4-20 x 2\ Long Square-Neck Carriage Bolts Set w/Nuts & Washers,Zinc-Plated,Carbon Steel Grade 2,by Fullerkreg

  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
  • About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening..
  • Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee.
  • Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is ¼ inch and lengths is 2 inch..
  • Package includes ten each of bolts, hex nuts & washers.
Check Stock

4 pc 3/8-16 x 5 Long Square-Neck Carriage Bolts Set w/Nuts & Washers,Zinc-Plated,Carbon Steel Grade 2,by Fullerkreg

  • Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
  • About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening..
  • Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee.
  • Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 3/8 inch and lengths is 5 inch..
  • Package includes ten each of bolts, hex nuts & washers.
Check Stock

Williams TS51709 1/2 Drive Turbo Socket, 18mm

  • Quickly and easily remove damaged or rounded nuts and bolts.
  • Place Socket for Salvage/Damaged Fastener Sockets on fastener and turn with ratchet, breaker bar or T-handle.
  • Grip on fastener tightens as more torque is applied.
  • No hammering is required to install Socket for Salvage/Damaged Fastener Sockets over fastener.
  • Use on all types of standard nuts and bolts as well as studs, pipe nipples, and corroded auto and marine fasteners.
Check Stock

GEARWRENCH 12 Pc. 12 Point XL GearBox Double Box Ratcheting Metric Wrench Set - 85988

  • XL GearBox design has a longer beam to increase leverage and torque.
  • Bright, full polish chrome finish for rust prevention and easy cleaning, oil and dirt wipes right off.
  • 0° offset and slim profile to access the tightest spaces and recessed fasteners.
  • Off-corner loading design on box end for better grip and reduced fastener rounding.
  • Ratcheting box end needs as little as 5° to move fastener as opposed to 30°.
  • Standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn fastener.
  • Long bolts and threaded rods are not a problem, the ratcheting head allows the wrench to travel the length of the threads without removing the box end from the fastener.
  • Wrenches come with a blow molded tray that keeps tools organized and can be hung on a wall or kept in your tool box or roll-away cabinet.
  • Extremely strong, GEARWRENCH meets or exceeds ANSI, ASME, DIN, and federal torque specifications.
Check Stock

NEIKO 10056A 1/4-Inch 3/8-Inch & 1/2-Inch Drive XZN Triple Square Spline Bit Socket Set | 10 Piece Set | Cr-V Sockets and S2 Steel Bits

  • [VERSATILE]: This fastener bit set features 10 metric bits with the 3 largest sizes being tamperproof. Triple-square spline sockets are ideal for use with tamperproof lug nuts, cylinder head bolts, and other engine bolts..
  • [DESIGN]: This kit can convert standard square drives to triple square bits and is designed to eliminate camout and recess fallaway with elliptically based geometry and vertical sidewalls..
  • [PREMIUM QUALITY]: High-strength chrome vanadium steel sockets provide superior torque for greater turning power with mirror chrome finish for corrosion resistance and S2 alloy steel bits reduce wear-outs and ensure longevity and the tamperproof bits are made of CrV for extra strength..
  • [PRECISION]: Precisely machined bit tips ensure accurate size with a 0° drive angle that eliminates radial force preventing fastener recesses and gives access to nuts and bolts on European and Japanese cars and trucks..
  • [INCLUDES]: Set includes 1/4" drive (4mm, 5mm, 6mm), 3/8" drive (8mm, 9mm, 10mm, 12mm, tamperproof 14mm) and 1/2" drive (tamperproof 16mm and tamperproof 18mm)..
Check Stock

BOSCH ITNSV105 5 pc. Impact Tough 1-7/8 In. Nutsetter Set

  • Impact Tough design – provides 10X life over standard nutsetters, with an Xtended Torsion Zone, hardened core and precision head.
  • Xtended Torsion Zone – helps to absorb the torque peaks of impact drivers to avoid breakage.
  • Precision-engineered nutsetter heads – deliver a better fit for a better-integrated fit for nuts, bolts and self-tapping screws.
  • Strong magnet – helps to maximize fastener retention.
Check Stock

El Tornillo Y La Tuerca

  • ...32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To Use And Storage, More Tidy] 100% brand new pan head nut and bolt, all screws and nuts are packed in a compact box and can be viewed through a separate plastic box. Easy to install and durable..
Check Stock

GEARWRENCH 12 Pc. 12 Pt. Flex Head Ratcheting Combination Wrench Set, Metric - 9901D

  • 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • Flexible head provides access to hard-to-reach bolts and fasteners.
  • Pass-thru technology works down any length of threaded rod and long bolts.
  • Bright, full polish chrome finish easily wipes clean and resists corrosion.
  • Hard stamped markings provide quick size identification.
  • Plastic wrench v-rack included for tool retention.
Check Stock

Thread Gauge Combo-Mini

  • Set includes both Inch and Metric identifiers. Thread sizes are permanently laser etched on each gauge..
  • All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts..
  • Takes the guess work out of thread size and pitch on nuts, bolts , screws, threaded holes and many other threaded items..
  • Eliminates costly and time consuming repairs..
  • Great for identifying and sorting nuts and bolts in fastener cribs, fastener bins at home or at your facility..
Check Stock