Categories

Best Header Collector Gasket

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Labconco 700611100 Free Zone Console Freeze Dryer with Non-Coated Stainless Steel Coil, Purge Valve, 6 L Capacity, -50 Degree C, North America Plug, 115V, 60 Hz, 16A

  • Upright stainless steel collector coil capable of holding 6L of ice before defrosting. Acrylic collector lid, 3/4" thick, has neoprene gasket.
  • Console cabinet with interior space for vacuum pump (sold separately) and two-piece, removable front panel with viewing window.
  • Clear acrylic chamber lid, 3/4" thick, with neoprene gasket.
  • Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents.
Check Stock

Oneida Air Systems Super Dust Deputy (4/5 DIY)

  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings..
  • HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector). Approximately 23" height..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, and to your tools with either a 4” or 5” hose. Includes cyclone, 2x reducer adapters, assembly gasket and hardware..
Check Stock

Labconco 701812210 Free Zone Console Freeze Dryer with PTFE-Coated Stainless Steel Coil, Purge Valve & Mini Chamber, 18 Liter Capacity, -50 Degree C, North America Plug, 230V, 60 Hz, 9A

  • Upright stainless steel collector coil capable of holding 18L of ice before defrosting. Acrylic collector lid, 3/4" thick, has neoprene gasket.
  • Console cabinet with interior space for vacuum pump (sold separately) and two-piece, removable front panel with viewing window.
  • Clear acrylic chamber lid, 3/4" thick, with neoprene gasket.
  • Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents.
  • Full color, 5" capacitive touch screen with Lyo-Works OS.
Check Stock

PAGOW 10 PCS Gy6 Exhaust Bolt and Gasket Kit for 50cc 125 cc 150cc Scooters ATVs Moped Quad 4 Wheeler Dune Buggy Sandrail Vehicles Motorcycle (2 Sets)

  • Best Compatibility: The Gy6 exhaust bolt and gasket can match with 50cc 125 cc 150cc Taotao Sunl Coolster Jonway Roketa Scooters ATVs Go Karts Moped Quad 4 Wheeler Dune Buggy..
  • Size Details: Bolts size: approx. M6X32mm long. Nuts/Caps: approx. 30.5mm long. Exhaust gasket outer diameter size: approx. 30mm. Exhaust gasket inner diameter size: approx. 23.5mm. Thickness of exhaust gasket: approx. mm..
  • Durable Material: The exhaust studs nuts are made from metal, which is sturdy and can last long time..
  • The header was bent from the original owner. When installed on new skid plate, it can create a gap and an exhaust leak..
  • Package Included: You will get 4pcs studs, 4pcs nuts and 2pcs gasket, 10 pcs in total..
Check Stock

Oneida Air Systems Super Dust Deputy XL 6" Retrofit Cyclone Separator for Single-Stage Dust Collectors (XL 6” Cyclone)

  • Patented design stops over 99% of fine dust and bulk debris before it clogs the dust collector's filter..
  • Eliminates filter clogging and suction loss while protecting the collector's fan blower from harmful debris..
  • Retrofits to any make/model single stage dust collector (3-5 HP recommended). 6" I.D. inlet and outlet ports for use with common ductwork..
  • Mounts to any airtight, reinforced dust container. Includes assembly gasket and hardware..
Check Stock

96 Pieces 46mm Coin Capsules, with Foam Gasket and Plastic Storage Organizer Box, 6 Sizes (20/25/27/30/38/46mm) Coins Collector Case Holder for Coin Collection Supplies

  • Coin Capsules for Coin Collection Supplies : The coin protector set with 96pcs 46mm coin capsules and 6 Sizes(20/25/27/30/38/46mm)foam gasket, 1*hard storage box(size:10.6*8.75*3inches), 12 grid foam compartment. Extra mesh pocket expanded capacity for more coins. Practical gift for coin collectors to store favorite coins..
  • Hard Coins Holder Storage: Coins collector case make of H-Q materials which is shockproof, water-resistant, Protect your coins against from scratch, dirtiness, damage, Soft foam insert fits the coin capsules snugly and neatly.100% protection for your coins..
  • Coin Display Case with 6 sizes foam gasket：Coin holder with inner size 46*3mm, 6sizes(20/25/27/30/38/46mm)foam gasket, Can fits all various coins,even 2020 - American Silver Eagle coins, bullion coins, challenge coins, US quartes or dollars, Stand up design allows you can easy to put in and out of the case..
  • Easy Use Coin Capsules Box Silver Dollar Coin Holders: Crescent design for the coin capsules,you can easy to open and close.The transparent design allows you can look at both sides of the coins without touching, easy to find the coins you need.makes it very easy to store and view..
  • Travel Carrying Coin Case: Smooth 360 zipper with strong handle. Supper convenience for travel....
Check Stock

FULLCASE 168 Pieces 46mm Coin Capsules with Foam Gasket and Plastic Storage Organizer Box 6 Sizes 20/25/27/30/38/46mm Coins Collector Case Holder for Coin Collection Supplies

  • 168 Coin Capsules for Coin Collection: The coin protector set with 168pcs 46mm coin capsules and 6 Sizes(20/25/27/30/38/46mm)foam gasket, 1*plastic storage box(size:13.25*8.9*2.25inches), 24 grid compartment with 20 removable layer. Large capacity can holds 168pcs coins. Practical gift for coin collectors to store favorite coins..
  • Plastic Coins Storage Holder: Coins collector case make of strong, heavy-duty plastic, more resistant and crash worthiness than acrylic.Transparent design clear enough for coins display, each compartment fits the coin capsules snugly and neatly.100% protection for your coins..
  • Coin collection supplies with 6 sizes foam gasket：Coin holder with inner size 46*3mm, 6sizes(20/25/27/30/38/46mm)foam gasket, Can fits all various coins,even 2020 - American Silver Eagle coins, bullion coins, challenge coins, US quartes or dollars, Stand up design allows you can easy to put in and out of the case..
  • Easy Use Coin Capsules Box: Crescent design for the coin capsules,you can easy to open and close.The transparent design allows you can look at both sides of the coins without touching, easy to find the coins you need.makes it very easy to store and view..
  • Travel Carrying Coin Case: Strong both latch for easy to open and close the case. The ex....
Check Stock

DNA Motoring HDS-SSAM86 Stainless Steel Exhaust Header Manifold

  • Made of high quality T-304 Stainless Steel material.
  • Inlet/ outlet: 1-1/2" OD mm/ 2-1/2" OD mm.
  • 4-2-1 full length header design/ replaces OEM manifold.
  • Increase high flow air, instantly gain 10 -15 HP./ TQ..
Check Stock

Mr. Gasket 1203C High Performance Triangle Collector Gasket-Two Per Set

  • Designed to prevent exhaust leakage between the header and collector flanges.
  • Made from a compressed fiber laminate that is heat and tear-resistant.
Check Stock

Patriot Exhaust H8021 1-5/8' Clippster Exhaust Header for Small Block Chevrolet 67-81

  • Mid length or "clippster" headers provide improved ground clearance for popular muscle cars and street rods.
  • Comes complete with gaskets, header bolts and collector reducers.
Check Stock

Labconco 700612000 Free Zone Console Freeze Dryer with PTFE-Coated Stainless Steel Coil, 6 L Capacity, -50 Degree C, North America Plug, 115V, 60 Hz, 16A

  • Upright stainless steel collector coil capable of holding 6L of ice before defrosting. Acrylic collector lid, 3/4" thick, has neoprene gasket.
  • Compact benchtop design with a small footprint.
  • Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents.
Check Stock

Patriot Exhaust H8059 1-5/8 Specific Fit Exhaust Header for Small Block Chevrolet

  • Patriot offers headers for many applications at prices you can afford.
  • Comes complete with gaskets, header bolts and collector reducers.
  • uncoated for individual customizing, chrome finish for that show quality shine or with Patriot's very popular metallic....
Check Stock