LINKUP - [Active Chip] USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

  • Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket..
  • …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
  • Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2).
  • including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode..
  • Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in ....
Check Stock

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

  • 【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
  • 【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • 【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
  • 【FAN Header】5V/12V, allows speed adjustment and measurement.
  • 【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.
Check Stock

Cablecc USB 3.1 Front Panel Socket & USB 2.0 to PCI-E Express Card Adapter for Motherboard

  • Connector1: USB 2.0 Socket Connector2: USB 3.1 Front Panel Header.
  • The adapter is a converter to convert the available PCI-E of a motherboard into a USB 3.1 header..
  • Thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without a suitable mainboard. The compact adapter can be inserted directly and....
  • Converter plug-in for the mainboard Fits into any USB 3.0 header Bundling in USB 3.1 with up to 10 GBit / s.
  • The adapter is the perfect solution to use the USB 3.1 connectors with Type-C or Type-A. Thus, two data lines with 5 Gbps each are available, which....
Check Stock

E-Simpo 10pcs 2.54mm (0.1") Hole Round Female Header Socket Gold Single Row Arduino PCB Female IC Crystal Socke High Quality (1x40P Hole Female Header)

  • 10pcs Single Row 40 Pin 0.1"(2.54mm) Header Socket Connector.
  • Single Row 40Pin Round Female Pin Header.
  • High Quality, Gold-Plated Contact,better electrical conductivity and low contact resistance. Generally used in circuit boards and other low-voltage circuits..
Check Stock

USB 3.0 Motherboard Adapter Cable 20 Pin Header Convert to Two Female A Type Lead for DIY Gaming PC 25cm

  • Connector Type : USB 3.0 internal motherboard 20/19 Pin header female to Two USB 3.0 A Female (PCI bracket Excluded).
  • This adapter provides a single standard USB 3.0 female connection, connecting USB 3.0 devices to the motherboard like Asus Sabertooth 990FX, plug and....
  • This USB 3.0 cable can be installed into a standard PC slot and will be connected internally to any USB 3.0 20 pin header socket. It expands your....
  • 2 ports USB 3.0 Type A female to motherboard header adapter cable, superspeed USB3.0 extension code, USB 3.0 female port backwards compatible with USB....
  • NOTE: The Y shape cable has 19 pins but the connector has 20 holes, one hole is unused. Length : 25cm (include connector).
Check Stock

ASRock Motherboard Micro ATX DDR4 LGA 1151 H110M-DGS

  • Memory: 2x DDR4-2133 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 32GB.
  • Slots: 1x PCI-Express 3.0 x16 Slot, 1x PCI Express 2.0 x1 Slot.
  • SATA: 4x SATA3 Ports, Support NCQ, AHCI and Hot Plug.
  • Ports: 4x USB 3.0 Ports (2 rear, 2 via header), 6x USB 2.0 Ports (4 rear, 2 via header), 1x PS/2 Mouse Port, 1x PS/2 Keyboard Port, 1x DVl-D Port, 1x RJ45 LAN Port, Audio I/O Jacks.
Check Stock

ASUS LGA1151 DDR4 M.2 DP HDMI LVDS Thin Mini-STX Motherboard (H110S1/CSM)

  • LGA1151 socket in Thin Mini-STX (5.5” x 5.8”) form factor.
  • DisplayPort, 2x HDMI and LVDS video outputs connect to a variety of displays.
  • Supports 1x 2280 M.2 SSDs and 1x 2230 M.2 Wi-Fi.
  • ASUS Corporate Stable Model benefits with 5X Protection II hardware safeguards .
Check Stock

Chenyang CY PCI-E to Type E Express Card USB 3.1 Type E Front Panel Socket & USB 2.0 to PCI-E 3.0 2X Express Card Adapter for Motherboard

  • Work for Motherboard , Fits into any USB 3.0 header.
  • Can be inserted directly and requires no additional attachments.
  • Bundling in USB 3.1 with up to 10 GBit / s.
  • Can use the USB 3.1 connectors with Type-C or Type-A , Thus, two data lines with 5 Gbps each are....
  • Can convert the available PCI-E of a motherboard into a USB 3.1 header , thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without....
  • USB 3.1 Front Panel Header & USB 2.0 Socket to PCI-E Express Card Adapter.
Check Stock

Supermicro A2SDi-2C-HLN4F Mini-ITX Motherboard

  • Memory: 4x 288pin DDR4-2133/ 1866/ 1600 DIMM Slots, ECC, Unbuffered, Max Capacity of 64GB.
  • Slots: 1x PCI-Express 3.0 x16 Slot (runs at x8), 1x PCI-Express 3.0 x8 Slot (runs at x4), 1x PCI-Express 3.0 x1 Slot.
  • SATA: 6x SATA3 Ports, Support RAID 0, 1, 5, 10.
  • Ports: 5x USB 3.0 Ports (2 rear, 2 via header, 1 Type A), 6x USB 2.0 Ports (2 rear, 4 via headers), 1x VGA Port, 2x Serial Ports (1 rear, 1 via header), 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port.
  • Form Factor: MicroATX, 9.6 x 9.6 inch / 24.4 x 24.4 cm.
Check Stock

ARCTIC Liquid Freezer II 280 RGB (incl. Controller) and Intel LGA1700 Upgrade Kit Bundle - Multi-Compatible All-in-one CPU AIO Water Cooler with RGB and Intel LGA1700 Mounting Kit

  • PERFORMANCE KING: With a more efficient cold plate, proprietary pump and fans optimized for static pressure, the Liquid Freezer II series clearly sets itself apart from other AiO water coolers.
  • ELEGANT ILLUMINATION: 24 digital RGB LEDs placed along the fan hubs plus the transparent rotor, with its closed design, provide even and rich illumination.
  • RGB CONTROLLER INCLUDED: This allows control of the fan LEDs via a free internal USB 2.0 header using ARCTIC's RGB software. A motherboard with RGB header is not necessary.
  • LGA1700 SOCKET WITH MODIFIED HOLE SPACING: With the new CPUs, Intel introduces the LGA1700 socket with modified hole spacing on the motherboard and changes in the mounting height of CPU coolers.
  • LGA1700 MOUNTING KIT FOR LIQUID FREEZER II SERIES: With our LGA1700 mounting kit for the Liquid Freezer II series, you can continue to use your ARCTIC cooler with a new Intel processor.
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

SUPERMICRO MBD-X9SCM-F-O LGA 1155 Intel C204 Micro ATX Intel Xeon E3 Server Motherboard

  • CPU: Socket 1155, Supports Xeon E3-1200?Family and 2nd Generation Intel Core i3 / Pentium Processors.
  • Memory: 4x 240pin DDR3-1333/1066/800 DIMMs, Dual Channel, ECC, Unbuffered, Max Capacity up to 32GB.
  • Slots: 4x PCI-Express 2.0 x8 Slots (two run at x4).
  • SATA: 4x SATA2 Ports, Support RAID 0/1/5/10.
  • Video: Nuvoton WPCM450RA0BX Graphics Controller.
  • Ports: 9x USB 2.0 Ports (2 rear, 6?via header, 1 type A).
Check Stock

Micro Center Intel Core i7-12700K 12 Gen Alder Lake 12-Core (8P+4E) up to 5.0 GHz Unlocked  LGA1700 Desktop Processor with ASUS TUF Gaming Z690-Plus WiFi D4 ATX Gaming Motherboard

  • Core i7 12th Gen Alder Lake 12-Core (8P+4E) ,up to 5.0 GHz Unlocked LGA1700 600 Series Chipset, 25MB L3 Cache,12MB L2 Cache.
  • The processor features Socket LGA-1700 socket for installation on the PCB,Intel 7 Alder Lake Processor Base Power: 125W,Intel UHD Graphics 770,Windows 11 Supported.
  • ASUS TUF Gaming Z690-Plus WiFi D4 Intel Z690 (LGA 1700) ATX gaming motherboard,Ready for 12th Gen Intel Core processors,DDR4 memory, four M.2 slots, HDMI, DisplayPort, SATA 6 Gbps,14+1 DrMOS, six-layer PCB, ProCool sockets, alloy chokes and durable capacitors for stable power delivery.
  • Next-gen connectivity:PCIe 5.0, USB 3.2 Gen2x2 Type-C, front USB 3.2 Gen 2 Type-C, Thunderbolt 4 header support,Made for online gaming:WiFi 6, Intel 2.5 Gb Ethernet and TUF LANGuard.
  • Outshine RGB Aura Effect:Stylish edge and PCH lighting design, addressable RGB headers and RGB strip header support,Comprehensive cooling:Enlarged VRM heatsink, PCH fanless heatsink, M.2 heatsinks, hybrid fan headers and Fan Xpert 4 utility in Armoury Crate.
Check Stock