Categories

Best Heat Flux Logger

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check Stock

Flux Off ChemtronicsES835B Flux Remover, Brush, 5 fl.oz.

  • Price for: each cleaner type: flux remover cleaner applications: electrical/ electronics/ heat sinks/ pcbs.
  • Dispensing method: brush applicator series: flux off volume: 5Fl.Oz. (Us) leaded process compatible: yes rohs compliant: yes.
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Limited Edition Peach Bourbon Hot Sauce by Tabañero | All Natural, Gluten Free, Low Sodium, Vegan, Kosher | Made in the USA | 6.7 Oz. Hot Sauce Bottle

  • Jalapeno Hot Sauce made with Ska Mexican Logger Beer 5 FL oz.
  • Excellent on your favorite dishes! Great flavors of the Ska Mexican Logger & Jalapenos it great on eggs, tacos, fries, hot dogs, nachos and so much more!.
  • Ska brewing Jalapeno Hot Sauce ingredients: Jalapeno Peppers, Viegar, Ska Mexican Logger Beer, Onions, Lime Juice, Garlic, Kosher Salt.
Check Stock

Freshliance 1 Packs USB Temperature Data Logger Recorder 129600 Points High Accuracy Cover 7days Single Trip Cold Chain Fresh Tag 1

  • TEMPERATURE DATA LOGGER:Freshliance Fresh Tag1 single use USB data logger,battery life up to 120 days,just simply press and hold for 5 seconds to turn on and accurately monitor the temperature data of your goods during transportation.
  • SMART SIZE BUT LARGE CAPACITY:High accuracy sensor,up to 129600 recording memory.Wide temperature measurement range of -22℉ to 158℉.Default alert temperature range is 36℉ to 46℉,Celsius (℃) need to consult with factory in advance.
  • LONG-LASTING BATTERY:Low battery power consumption,Records up to 7days of temperature data.In addition,Water proof package comply with Ip85.
  • EASY TO OPERATE:No software required,automatically generating PDF reports.All the data and parameters Pre-programmed by factory,irreversible and true recording.
  • WIDELY USED:Fresh Tag1 Wireless thermometer data logger is an ideal choice for monitoring and recording the temperature sensitive goods during transportation.Covering all kinds of cold chain shipping including pharmaceuticals,frozen food,fresh food,vegetable,fish,cold storage etc.
Check Stock

inktastic Logging Future Logger Baby T-Shirt 12 Months Vintage Natural 30f58

  • Future logger Baby T-Shirt for a boy who wants to be a lumberjack or logger when he grows up.
  • Double-needle stitched sleeves and bottom hem.
Check Stock

SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack of 10 Foot Solder Wick Spools

  • 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action..
  • High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures..
  • Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes..
  • Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads..
  • PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant..
Check Stock

Cooler Master MasterLiquid PL360 Flux Series 360mm AIO CPU Liquid Cooler, 0 RPM, Dual Chamber Pump, Enlarged Copper Base, ARGB PL-Flux 120mm Fans for AMD Ryzen/Intel 1700/1200/115X

  • Dual Chamber Pump: New Compact Performance Dual Chamber pump delivers the perfect balance of water flow and pressure for impressive cooling..
  • Ultimate Heat Exchange: High speed motor utilizing a ceramic bearing impeller forces balanced water flow to and from the radiator for ultimate efficiency of heat exchange..
  • PL-Flux specific fans: Inter-conneting air balance fan blades increased sturdiness and stability operating steadily at high speed. Angled inner rim of fan frame increasing intake of air, at the same time gap between from and blades creating greater air pressure.
  • Enhanced Air Balance Fan Blades: 120 mm square frame ARGB fan designed with inter-connecting air balance fan blades uniquely modified for the PL-Flux Series..
  • Slim & Sleek Radiator: Low profile radiator with superior fin density coupled with performance fans dissipates heat rapidly..
Check Stock

Kestrel Drop 2 Smart Humidity Data Logger

  • Know your temperature and humidity conditions anywhere with the small, rugged, waterproof Kestrel DROp D2 Temperature and Humidity Data Logger.
  • The EASIEST way to monitor and track temperature, humidity, heat index and dew point temperature in almost any environment – wet or dry, indoors or....
  • View data wirelessly via Bluetooth Smart on your iOS phone or tablet with Kestrel Connect app.
  • Store thousands of data points and get months of logging on a single coin-cell battery – customize logging rate, connections and temperature alerts.
  • See, save and share data from multiple DROP loggers with just one phone or tablet – iOS 6 installed iPhone 4s, iPad 3rd generation or later.
Check Stock

My Money Grows On Trees Logging Equipment Skidder Driver Zip Hoodie

  • Check out this Logging equipment design! Perfect for anyone who loves the smell of diesel in the morning. Perfect for when you hug that tree or sit at the set waiting to drag another load to the set..
  • This is a great gift for the logging operator in your life. Whether you're a swamp logger, wife of a logger, or if you're into deforestation, this design is for you!.
Check Stock

My Money Grows On Trees Logging Equipment Skidder Driver T-Shirt

  • Check out this Logging equipment design! Perfect for anyone who loves the smell of diesel in the morning. Perfect for when you hug that tree or sit at the set waiting to drag another load to the set..
  • This is a great gift for the logging operator in your life. Whether you're a swamp logger, wife of a logger, or if you're into deforestation, this design is for you!.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Goplus® MIG 130 Welder Flux Core Wire Automatic Feed Welding Machine w/Free Mask

  • 【Household Smart Welder】compact and exquisite MIG gas welder, made of heavy duty stainless steel body, painted with durable yellow paints, ensure....
  • 【Flux-Cored Wire, No Gas Welder】uses convenient Flux-Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part..
  • 【4 Levels Adjustable Welding Speed】features 4 levels of current flow settings, by adjusting the 4 buttons for MIN/MAX,1/2. Also features a wire....
  • 【Portable Design & Wide Applications】it is perfect for welding normal thin steel and iron, perfect for home DIY and general repairing work. Mini....
  • 【Many Complimentary Necessities】two air-vent on the machine to help heat dissipation. The welding gun with full on / off safety control. Standard....
Check Stock

3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No

  • Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
  • Each soldering flux pen measures approx. 5.6 inches in length.
  • Safe to use: these flux pens are made of quality material, no leak and safe to use.
  • Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
  • No residue will interfere with electrical testing.
  • Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
  • It allows controlled application of flux, thereby removing dirt in the flux bottle.
  • Pen tip of 10 ml with practical designed felt tip.
  • The solid content is low and there is almost no residue.
  • Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
  • It is lightweight and would not occupy too much space, suitable pocket size to carry.
  • How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
  • After that, you can use the alcohol to clean the pen.
Check Stock