Categories

Best Heat Gun For Shrink Tubing

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

Mini Heat Gun, 350W/662°F Hot Air Gun with 6.56Ft Long Cable-HGP35AC

  • ...t tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders.
  • Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly..
  • Easy and Long Endurance: Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project..
  • Wide Application and Product Service: With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help..
Check Stock

Master Appliance HT-1000 Pro Butane Powered Cordless Heat Gun w/Shrink Tube Reflector, Portable Hot Air Gun, High Heat Butane Heat Gun, Heat Shrink Gun with Reflector, Butane Refill - USA Company

  • ...y Owned Company. The HT-1000 cordless heat gun is portable and lightweight, weighing only 20.6 oz. Without cables and wires restricting your movement, you can use the hot air gun just about anywhere your project is. This cordless heat gun can help you take on many jobs including thawing frozen pipes, terminate shrink tubing and wire connectors. This heat gun is powered by butane fuel.
  • BUTANE POWERED: For the best performance, use Master's Ultratane butane refill. One full tank of butane will last up to 40 minutes of use. This butane-powered heat gun has a self-igniting piezo electric ignition. It only takes seconds to refill the hot air gun and the runtime is longer than a battery powered heat gun. Cordless heat at its best..
  • MULTIPURPOSE HEAT GUN: A versatile hot air gun, use on heat shrink tubing, wire connectors to soldering and de-soldering. The Master Appliance portable heat gun has a temperature range of 650F to 950F (343C to 510C) for quick and effective heating ability. Use the hot air gun to loosen rusted bolts, defrost frozen metal, terminate electrical wire connectors and terminals, and more..
  • HIGH PERFORMANCE: Master Appliance portable hot gun has multiple flames providing impressive heat and airflow. The butane flames stay contained wi....
Check Stock

2 Pcs 3/4 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 3/4" in diameter large heat shrink tubing black and red (Note: it is 3/4" in round diameter, but not 3/4" in width). Other sizes also a....
Check Stock

Floweryocean 350W Mini Heat Gun,UL Certification,Dual Temp 392°F/662°F 6.56Ft Cable Fast Heating Hot Air Gun With 55 Pcs 4:1 Heat Shrink Tube,For Wire & Cable Repair,Crafts,Epoxy Resin,Shrink Wrapping

  • 【Ergonomic & Insulated】: The heat gun is made of pencil shaped handle, non-slip, light weight, the housing is made of good ABS+PC, internal stainless steel, you can easily hold it without feeling too hot when heating with the heat gun. stable folding support frame leaves this heat shrink gun fixed on the table safely and easy to use. Portable mini electric heat gun can be carried with you convenient for you work at any time..
  • 【ULcertification & overload protection】: The heat guns has passed ULcertification. Mini heat gun has dual temp set, I : 392°F, 100/min.
  • II : 662°F, 300/min. It is built in overload protection, when heat shrink gun work for too long or hot, it will automatically stop working avoid fire. Nozzle safety shield design, provide you with maximum safety protection..
  • 【Widely used heat gun】: 6.56 ft cable allows you to work anywhere easily, make work more convenient. heat shrink gun for resin, shrink wrap, vinyl wrap, candle making, jewelry making, embossing, watercolor drying, shrink tubing, wire connectors, phone repair, defrosting and so on. If you like DIY, it's a great tool for creating your own handmade work..
  • 【Heat gun kits】: Includes 1 x 350W mini heat gun, 1 x reflector nozzle, 55 pcs adhesive lined Waterproof....
Check Stock

27pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Kit, 3 Large Sizes (Diameter): 3/4, 1/2, 1/4-inch, Marine 7-inch Long Cable Wire Sleeve Tube Assortment with Storage Case for DIY by MILAPEAK (Black)

  • ★【Premium Wire Protector】- 3 Popular large sizes high-quality heat shrink tubing for your choose, perfect for electrical insulation, wire bundling, mechanical protection, cable joints and daily repairs etc.. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★【Safe & ECO-Friendly】- Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free, protect you and your famaily from toxins..
  • ★【Good Tightness with Glue Lined】- Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you and your kids DIY..
  • ★【Fast & Easy Use】- Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use....
Check Stock

1/2 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 4 feet long 1/2" in diameter large heat shrink tubing (Note: it is 1/2" in round diameter, but not 1/2" in width). Other sizes also available in our stor....
Check Stock

650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap..
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun..
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: 003e20kV/mm. Elongation at break: 003e400%. Volume resistivity: 003e1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape..
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and cor....
Check Stock

2 Pcs 1 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 1" in diameter large heat shrink tubing black and red (Note: it is 1" in round diameter, but not 1" in width). Other sizes also availab....
Check Stock

2 inch Diameter 3 1 Waterproof Heat Shrink Tubing Kit Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube Insulation Sealing Wear-Resistant Cable Protector by YUKSY 4ft Black

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance.....
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and....
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink....
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and....
  • Multiple Size - This is 4 feet long 2" in diameter large heat shrink tubing (Note: it is 2" in round diameter, but not 2" in width). Other sizes also....
Check Stock

Master Appliance EC-200 Variable Temperature Heat Gun, Hot Air Gun, 120V, 10 Amps, 1200W, for shrink wrap, wire connectors, shrink tubing, crafts, stripping paint

  • ...ariable temperature heat for those do-it-yourself projects from a known and trusted USA brand..
  • VARIABLE TEMPERATURE HEAT GUN & 2 FAN SPEEDS: The EC-200 heat gun can be adjusted from 100F to 930F and has two fan speeds 5 & 9 CFM. The adjustability makes it versatile for a wide range of projects. A great heat gun for shrink tubing, electrical wire connectors, packaging, epoxy resin, stripping paint, crafts, candle making and more.
  • ETL LISTED & BUILT IN HAND GUARD: This heat gun has been tested and approved by ETL safety testing agency. Hand guard protects hands and fingers. A recessed switch guards against knocks and bumps..
  • LIGHTWEIGHT AND BUILT IN STAND: The EC-200 heat gun weighs only 1lb and has a built-in wire stand on its handle. Rest the heat gun on its back when not in use or for hands free use when connecting wire connectors or heat shrink tubing..
  • 1 YEAR LIMITED WARRANTY: All Master heat guns, soldering irons, butane torches and propane torches are backed by a 1-year limited warranty. Contact Master Appliance directly for warranty information and specifics..
Check Stock

FloweryOcean 300W Mini Heat Gun 200℃ Handheld Portable Hot Air Gun and 328 Pcs Heat Shrink Tubing for Shrink Wrapping Epoxy Resin Supplies Embossing Crafts Candle Making Phone Repair DIY Pink

  • 【Classic Design】: Pencil shaped handle and non-slip design, light weight, make the heat gun fit comfortably in your hand. Retractable bracket....
  • 【High Efficiency】: 300W mini heat gun tools with two vents at the end, can quickly reach 200℃/392°F in seconds, mini heat gun is especially....
  • 【Safety Usage】: Adopted high quality ABS material, stainless steel inside makes this hot air gun more safe and durable, heat gun tools with nozzle....
  • 【Widely Used Heat Gun】: Can be used for crafts, epoxy resin supplies, shrink packaging, candle making, embossing, watercolor drying, shrink....
  • 【Professional 328 pieces heat shrink tubing】: Manufactured from high quality thermoplastic polyolefin and offer excellent electrical properties. 8....
Check Stock

mofa Embossing Heat Gun,Hot Air Gun Tools Shrink Gun with Stand For DIY Embossing And Drying Paint Multi-Purpose Electric Heating Nozzle 150W White,Blue

  • Pencil-like heat gun design meet delicate need of resin projects. Retractable bracket for hands free operation for cup acrylic making. Handle part....
  • Built with a heat sink, stabilize the internal temperature of the hot air gun and achieve a long-lasting performance. Over-heat protection,....
  • Mini heat gun is perfect acrylic paint tool for beginners, amateurs, enthusiasts, the skilled, kids, girls, women, adults, etc. A great must have....
  • Bubble Remove Machine for DIY Epoxy Tumblers: Our heat gun is particular designed for cup resin painting to eliminate bubbles, which can make your cup....
  • Versatile: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube....
Check Stock