Categories

Best Heat Insulation Board Extruder

BIQU H2 Extruder V2.0 New Upgraded Dual Gear Extruder 3D Printer Dual Drive Feed Not Stuck for Creality Ender&CR Series Printers Geeetech Anycubic Mega S Printers and Prusa I3 DIY 3D Printer Kits

  • √【Upgraded Gear Is No Longer Stuck】①The design of output gear modulus is changed from 0.5 to 0.25, reducing gear outer diameter,which can....
  • √【The Advantages of Upgraded Stainless Steel Gear】H2 extruder V2.0 is upgraded to new high quality stainless steel output and transmission gears....
  • √【Brand New Titanium&Copper Alloy Heat Break】BIQU H2 extruder V2.0 adopt titanium&copper alloy all metal heat break, the best quality material....
  • √【High Performance Unique Cooling System】The heat sink structure on H2 extruder V2.0 is optimized to ensure airflow is diverted up and away from....
  • √【Wide Compatibility】H2 extruder has wide compatibility for variety 3D printer on the market like Creality Ender & CR Series Printers, Geeetech,....
Check Stock

Organic Fine Vermiculite - 15LB Box (70 Quarts) - for Indoor Gardening - Soil Amendment - Soil Conditioning - Grow Media for Gardening - Hydroponics - Mushrooms - Packing Material

  • Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
  • Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
  • Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
  • Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
  • Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..
Check Stock

JCBIZ 12pcs TO220 Black Aluminum Heat Sink Transistor Radiator or TO220 Cooler Cooling

  • The heat sink increases the area of the board, thus providing greater heat transfer..
  • TO-220 insulation kit: 12 m3 screws + 12 white insulation rings + 12 insulation sheets + 12 heat sink.
  • Reduce the risk of hardware failure due to overheating..
  • Black alumina heat sink with exquisite workmanship, good heat dissipation and long service life..
Check Stock

eSUN 3D Printer Cleaning Filament 1.75mm Natural 0.1kg for All 1.75mm FDM 3D Printers, 1.75mm Cleaning

  • Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius..
  • Cleans the extruder's interior by removing accumulated residual filaments..
  • Possesses a certain level of adhesive quality. Will not clog extruder..
  • Clean the 3D printer's extruder before and after printing for better extruder protection..
Check Stock

Sprite Extruder Pro Upgrade Copper+ Titanium Alloy Throat Tube Bimetal Heatbreak Compatible with Creality Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 3D Printer (Bimetal Heatbreak)

  • This heatbreak is Only Compatible with FDM 3D Printer equipped with Sprite Extruder or Sprite extruder pro, like Ender 3 S1, Ender 3 S1 Pro, CR-10 Smart Pro, Sermoon V1 and Sermoon V1 pro 3D Printer.
  • This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction..
  • Copper and Titanium TC4 Bi-Metal Heatbreak has High temperature resistant up to 500C degree, smooth inner wall reduce clogging. It is named "Bi-Metal Heatbreak" with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged..
  • NOTE: the smooth part size is OD6mm, not suitable for other hotend, only Compatible with Creality Sprite extruder or sprite extruder pro use, please know before ordering.
Check Stock

Simond Store Ceramic Fiber Insulation Board (2300 F) (1\ X 18\ X 24\), Ceramic Thermal Insulation Board for Wood Stoves Fireplaces Furnaces Forges Kiln Pizza Oven - Pack of 1

  • Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
  • Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
  • Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
  • Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
  • Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..
Check Stock

Artillery Sidewinder SW-X2 3D Printer Latest Model Ultra-Quiet Printing 300x300x400mm Automatic Leveling Power Failure Recovery 95% pre-Assembled 110V-220V Free Switching

  • The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it....
  • The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR....
  • There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and....
  • SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically....
  • With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive....
Check Stock

Aystkniet Official Creality Ender 5 Pro 3D Printer, DIY FDM 3D Printers for Home and Adults, Upgraded Silent Mother Board Metal Feeder Extruder and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm

  • Super Quiet: Unlike the cheap 3d printer, the silent board of the ender 5 pro was really great, no jerking motions or sounds from the motors which includes the newest Creality V4.2.2 silent Mainboard with TMC 2208 stepper motor drivers..
  • Better Extruder Kit: Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will bolster the overall printig performance..
  • Capricorn Tubing: Capricorn Premium PTFE Tube makes the Creality Ender 5 pro 3-d printer better suited to print with flexible filaments and other exotic materials..
  • Brand Power Supply: Ender 5 pro 3d printing machine built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes..
  • Easy to Build: Creality Ender 5 Pro 3D Printer was easy to assemble, You woul printing in about an hour, especially with the good supplementary setup videos on YouTube..
Check Stock

All Metal MK8 Extruder MYSWEETY 3D Printer Extruders Hotend Kit with 0.2/0.3/0.4/0.5mm Nozzle Print Head for MakerBot Prusa i3 Reprap 3D Printer 1.75mm Filament Supported

  • Assembled mk8 extruder come with 4 print nozzles.
  • It is compatible with most prusa i3 3d printers with some slight modifications when mounting it..
  • Filament size: 1.75mm PLA/ABS or other 3d print materials. Flow rate of nozzle:max 100mm/s, support for high speed printing..
  • Nema 17 high quality stepper motor with larger torque and less heat buildup..
  • Special ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably..
Check Stock

Rluii Garment Steamer Ironing Glove Mitt/Anti Steam Heat Resistant Gloves/Protective Ironing Glove/Ironing Board Hand-Held Ironing Board for Ironing Collar/Cuff/Handheld Clothes Steamer Accessories

  • steamer heat glove made of special heat insulation and waterproof cloth, which effectively prevent penetration of steam to protect your hands from scalded. No more steam burns!!.
  • ironing gloves,good hand feeling and more flexible to use.this steamer glove allows you to iron your clothes safely and conveniently..
  • this collar ironing board allows you to iron your clothes safely and conveniently pocket /collar/cuff/suit lining, etc. our ironing board would be a great helper.
  • the ironing board insulation board is placed under the collar/cuff/pocket, help ironing smoothly for shirts, suit and more. Size.
  • protective gloves 8.38 inchesX4.9 inches；.
  • steam protective gloves for clothes steamer, garment steamer, fabric steamer, handheld steamer, iron steamer, travel steamer, etc..
Check Stock

Home Intuition Ceramic Fiber Insulation Sheet 12'x24', Fire rated up to 2500F - High Temperature Fireproof for Oven, Fireplace, Furnace, Gas Forge, Boiler, Pipe, & Dishwasher Sounds Insulation Blanket

  • EASY FIREPROOF INSULATION - Each sheet of ceramic fiber insulation has a heat rating of 2500 degrees Fahrenheit. Easier and safer to install yourself compared to fiberglass board or gel based heat insulation material. Sheet measures 1" thick by 12" by 24"..
  • MULTIPURPOSE - The high tensile strength insulation can be used to insulate kitchen backsplashes, brick pizza ovens, wood stoves, dishwashers, fridges, freezers, furnaces, kilns, gas forges, fireplaces, chimneys, pipes, residential walls, commercial wall, automobile boilers, mufflers and more..
  • DIY INSTALL - The convenient flexible 2 square foot size sheets can be quickly and easily installed wherever you need for full heat installation or patch fixes. Just like larger rolls, you can cut the sheets with a boxcutter or knife for the perfect fit. Gloves recommended..
  • LOW THERMAL CONDUCTIVITY - Our specially engineered high heat insulation has high tensile strength to help save energy by reducing heat loss, increasing efficiency and lifespan of the product. This ceramic insulation sheet has a high chemical stability and durability for everyday use..
  • HOME INTUITION ADVANTAGE - We offer a large variety of everyday items to make your home better. Join thousands of happy home owners...Click Add-to-Cart ....
Check Stock

FLASHFORGE Creator Pro 2 3D Printer Independent Dual Extruder, Dual Color Printing, Open 3D Slicer Support with 2 Spools Filament, Work with PLA, ABS, PVA, PETG Filament, Build Volume 200*148*150mm

  • ✨INDEPENDENT DUAL EXTRUDERS - Dual extruder 3D printer Creator Pro 2 realizes Double productivity & Dual filament printing. 4 print modes, Mirror, Duplicate, Dual Filament and Dual-color modes. 2 nozzles work simultaneously and independently to achieve double productivity..
  • ✨HEATING BED - Rapid steady heating prevent model warping much easier to take down models. It supports various types of filament ABS, PLA, PVA, HIPS, creating more realistic models!.
  • ✨REMOVABLE COVER - Creator Pro 2 dual extruder 3d printer lets you adjust chamber temperature at ease. Simply remove its cover when printing PLA filament, as high environment temperature may cause nozzle clog. When print ABS filament, please close the chamber for better quality..
  • ✨RESIDUE SCRAPING DESIGN - After printing, the print head moves to the residue scraping board edge to scrape any residual material on the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, get cleaner dual prints..
  • ✨WIDE RANGE OF APPLICATIONS - Perfect for small workshop's production dem....
Check Stock

Creality Official Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX 3D Printers Support Printing Flexible Filament BL Touch CR Touch

  • 【100% Creality Original】Sprite Extruder Pro Upgrade Kit come with a short cable for connecting BL Touch/CR Touch, combine extruder and all metal....
  • 【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more....
  • 【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be....
  • 【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more....
  • 【Creality Official Store】We are the official store of Creality 3D! We provide professional after-sales support, more than 20 engineers provide....
Check Stock