Categories

Best Heat Shrink

Waterproof Heat Shrink Tubing Kit 350 pcs ELECFUN 3 1 Dual Wall Tube - Adhesive Lined - Marine Heat Shrink Tubing Black 7 Sizes

  • [3:1 Shrink Ratio & Fast Shrink] Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • [Adhesive Lined Heat Shrink Tubing] While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • [Dual Wall Tube & Safer] Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • [7 Sizes] Heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". Heat shrink tubing is precut to 1.77in..
  • [Wide Applications] Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

ELECFUN 2in Heat Shrink Tubing 3 1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube Fully Insulation 4 Feet Black Tubing and 4 Feet Red Tubing

  • Package: 4 ft long Black 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 4 ft long Red 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~....
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting....
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED....
Check Stock

500pcs Set 4''x 6'' | Polyolefin Heat Shrink Wrap Bags | nontoxic/odorless | Perfect Bath Bomb Shrink wrap or soap Packaging| Wrapping, Bottle Sealer, Arts and Crafts, homemaking or Other Small Items

  • EASY TO USE - Our heat shrink wrap bags shrink up quickly with a heat gun - (highly recommended) - works very well sealing soap, bath bombs or other homemade arts or crafts..
  • STURDY MATERIAL These heat shrink wrap bags can be used for shrink wrapping a wide variety of small products under 4 x 6 inches. They are thin strong heat shrink wrap bags and come ready to use on any suitable shrink wrap packaging project..
  • 500 PIECES IN ONE SET - Super high quality and value for the price. Perfectly seals small boxes or bottles that need to be vacuum sealed to preserve them. These save you time, because we are careful to provide tough shrink wrap in a large quantity so that you don’t have to redo your work..
  • POV FEATURES - These heat shrink wrap bags made from Polyolefin (POF film shrink differently than PVC) material and are not perforated. They are clear, pretty bags that allow you clearly view what is inside..
  • ENVIRONMENTALLY FRIENDLY - Our thin strong shrink wrap bags are made of safe material that is nontoxic, tasteless, clear, very strong and great for handmade products. They keep your items dry and prevent moisture in your heat-sealed products..
Check Stock

MILAPEAK 180 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black

  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Multiple Sizes: 180pcs black high-quality marine heat shrink tubing for your choose, various sizes can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc..
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are both UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins..
  • ★ Fast & Easy Use: Our heat shrink tubing was pre-cut to 3.5 inches, it is 3:1 heat shrink ratio, and will shrink up to 1/3 of or....
Check Stock

Aonomi Compatible Industrial Heat Shrink Tube Labels Replacement for DYMO 18053 Fit with DYMO Rhino 4200 5200 5000 6000 Industrial Label Maker Black on White 3/8 x 4.9 ,10-Pack

  • Compatible with DYMO Rhino Pro 1000, 3000, 4200, 5000, 5200, 6000, ILP-219, 3M PL100, PL200, PL300 and Tyco T107M label makers..
  • Size of Each Tape: 3/8 inch (9mm) wide, 4.9 feet (1.5m) long. The size indication for this Heat-Shrink Tube is the width of the flattened tube as a....
  • Made of industrial grade polyolefin offers a 3:1 heat shrink ratio make sure to fit on wires or cables and make heat-shrink tube labels indispensable....
  • Heat shrink tube offers an excellent method of labeling wires and cables: Fantastic custom heat shrink solution, print legibly and shrink up perfectly....
  • All heat-shrink tube labels offer the convenience of printing directly on the tubing itself with any Industrial labeling tool for high-end cable....
Check Stock

MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 150mm Flat 1.5m Blue Good Insulation for Battery Pack

  • PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be....
  • The PVC heat shrink wrap tube is in size of: 150mm(6-inch) flat width, 1.5m total length, -40°C to +105°C(-40°F to +221°F) temperature range,....
  • Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the....
  • Steps of intallation:1.Prepare heat shrink tube, cut it to the length you want.
  • Notice: Hot air gun is usually used as heating tool. When using the hot air gun to heat, pay attention to move back and forth to make the heat shrink....
Check Stock

ELECFUN 3/8in Heat Shrink Tubing 3:1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube, Fully Insulation (4 Feet Black Tubing, and 4 Feet Red Tubing)

  • Package: 5pcs 0.8ft Black 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 5pcs 0.8ft Red 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

Industrial Heat Shrink Tubing Kit,AIRIC 300pcs 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat Shrink Tubing Black, 7 Sizes(Diameter): 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, 3/32 inch

  • 7 Sizes: Industrial heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". The length of heat shrink tube is precut to 45mm..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

Wowxyz Shrink Wrap Bags Large 10x14 50Pcs Heat Shrink Film Book Packaging Plastic Seal Bag for Packing DVD, CD, Tumbler, Bottle, Homemade Gift, Industrial Shrinking Wraping Supplies Clear

  • Heat Shrink Wrap Bag Information: Size: 10 x 14 inch, Package: 50pcs/bag, Material: high quality safe, nontoxic, odorless, sturdy PVC.
  • Great Packing Material to Wrap Items Nice and Professional：These Clear Heat Shrink Wraps bag help you keep the dust away, and gives a professional, finished look to products, perfect for small business, homemade gift..
  • Easy To Use Large Shrink Wrap Bags: Put items to the shrink wrappers bags, seal shrink bags and cut off the excess part with impulse heat sealer machine,then use heat gun or heat tunnels or hair dryer to shrink. Tips: Worked using a hair dryer but better with heat gun..
  • Work for Irregular Shape Items: This bags have high shrinkage rate and very sturdy, can pack odd shapes or high tops irregular items but won't be torn..
  • Wide Usage Large Heat Shrink Wrap Bags: They are perfect for packaging Video, Magazine, Literature, Brochures, Catalogs, DVD, CD, Tumbler, Bottle, Homemade Gift, DIY projects, books, mugs, boxes, photo frame, bar soap, jars, candles etc..
Check Stock

2 inch Diameter 3 1 Waterproof Heat Shrink Tubing Kit Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube Insulation Sealing Wear-Resistant Cable Protector by YUKSY 4ft Black

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance.....
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and....
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink....
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and....
  • Multiple Size - This is 4 feet long 2" in diameter large heat shrink tubing (Note: it is 2" in round diameter, but not 2" in width). Other sizes also....
Check Stock

Floweryocean 350W Mini Heat Gun,UL Certification,Dual Temp 392°F/662°F 6.56Ft Cable Fast Heating Hot Air Gun With 55 Pcs 4:1 Heat Shrink Tube,For Wire & Cable Repair,Crafts,Epoxy Resin,Shrink Wrapping

  • 【Ergonomic & Insulated】: The heat gun is made of pencil shaped handle, non-slip, light weight, the housing is made of good ABS+PC, internal stainless steel, you can easily hold it without feeling too hot when heating with the heat gun. stable folding support frame leaves this heat shrink gun fixed on the table safely and easy to use. Portable mini electric heat gun can be carried with you convenient for you work at any time..
  • 【ULcertification & overload protection】: The heat guns has passed ULcertification. Mini heat gun has dual temp set, I : 392°F, 100/min.
  • II : 662°F, 300/min. It is built in overload protection, when heat shrink gun work for too long or hot, it will automatically stop working avoid fire. Nozzle safety shield design, provide you with maximum safety protection..
  • 【Widely used heat gun】: 6.56 ft cable allows you to work anywhere easily, make work more convenient. heat shrink gun for resin, shrink wrap, vinyl wrap, candle making, jewelry making, embossing, watercolor drying, shrink tubing, wire connectors, phone repair, defrosting and so on. If you like DIY, it's a great tool for creating your own handmade work..
  • 【Heat gun kits】: Includes 1 x 350W mini heat gun, 1 x reflector nozzle, 55 pcs adhesive lined Waterproof....
Check Stock

Heat Shrink Tubing Kit,Mini Heat Gun + 328 PCS Heat Shrink Wrap Tube　2:1.

  • 328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second..
  • High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube..
  • Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection..
  • [Product parameters] Heat gun ：The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm..
  • [Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products..
Check Stock