Categories

Best Heat Treated Threaded Rods

Commercial S-Hook Pliers and Chain Cutter

  • MAXPOWER Chain Pliers Size : 9" (250mm) chain plier with 19" (500mm) chain length, Holds up to 6"(150mm) diameter pipes.
  • Chain holds and locks around any shape or size, Ideal for smooth-surfaced round pipes, rebar and threaded rods.
  • Constructed of heat-treated chrome vanadium steel maximum toughness and durability.
  • Adjustable Knurled thumbscrew sets jaw capacity, Non-Slip grip marks on top and bottom jaws for positive gripping.
  • One-handed quick release, easy to operate, even with gloves on.
Check Stock

MAXPOWER 3-piece Groove Joint Pliers - Industrial Grade Adjustable Tongue-and-Groove Pliers for water pumps and pipes

  • MAXPOWER Chain Pliers Size : 9" (250mm) chain plier with 19" (500mm) chain length, Holds up to 6"(150mm) diameter pipes.
  • Chain holds and locks around any shape or size, Ideal for smooth-surfaced round pipes, rebar and threaded rods.
  • Constructed of heat-treated chrome vanadium steel maximum toughness and durability.
  • Adjustable Knurled thumbscrew sets jaw capacity, Non-Slip grip marks on top and bottom jaws for positive gripping.
  • One-handed quick release, easy to operate, even with gloves on.
Check Stock

Dubuque Clamp Works UC924 24″ Adjustable Bar Clamp for Woodworking – 4-PACK

  • Four (4) 24″ capacity Dubuque Clamp Works UC924 bar clamps.
  • Specifications: 1-3/8 x 7/8 in. notched bar with 1/8″ thick walls.
  • movable head has spring clutch for easy and secure adjustment.
  • fixed head features a 1/2″ acme-threaded screw and wing knob for final tightening.
  • Materials: bar made from heat-treated, extruded aluminum.
  • movable parts made from heat-treated cast 683 aluminum.
  • Design allows for single-handed operation. Clamp remains reliably straight under force — clamp your workpiece against it to prevent misalignment. Wood glues will not react with or adhere to aluminum — no staining on your workpiece, and easy clean-up!.
Check Stock

Dubuque Clamp Works UC936 36″ Adjustable Bar Clamp for Woodworking – 4-PACK

  • Four (4) 36″ capacity Dubuque Clamp Works UC936 bar clamps.
  • Specifications: 1-3/8 x 7/8 in. notched bar with 1/8″ thick walls.
  • movable head has spring clutch for easy and secure adjustment.
  • fixed head features a 1/2″ acme-threaded screw and wing knob for final tightening.
  • Materials: bar made from heat-treated, extruded aluminum.
  • movable parts made from heat-treated cast 683 aluminum.
  • Design allows for single-handed operation. Clamp remains reliably straight under force — clamp your workpiece against it to prevent misalignment. Wood glues will not react with or adhere to aluminum — no staining on your workpiece, and easy clean-up!.
Check Stock

Murtenze 2Pcs M5 x 250mm Fully Threaded Rod, 304 Stainless Steel Long Threaded Screw Right Hand Threads (Silver)

  • Package & Size - You will get 2 pcs 5mm x 250mm threaded rods worth of.
  • Total length: 251 mm/9.84 inches. Fully threaded rods and studs can be drilled, cut, heated and formed.
  • Durable Material - These m5 threaded rods are made of 304 stainless steel, with excellent corrosion resistance and rust resistance, and long service life.
  • How to Use - Our stainless steel threaded rods can be used for assembly and fastening, screwed into nuts or threaded holes, and cut to the length you want.
  • Widely Application - These threaded rods and studs m5 are suitable for various applications, such as anchor bolts, fixtures, hangers, U-bolts, welding protrusions, and even model building, etc..
  • Satisfied Service - 100% Satisfaction If there is any quality problem with our product, we will reply within 24 hours. And you can return the product and get a refund within 30 days from receiving. You have no risk of trying, please order with confidence and no hesitate..
Check Stock

OMT Coil Spring Compressor Tool Set of 3, 12 Inch Strut Spring Compressor Tools, 3 Heavy Duty Rods with 6 Safety Hooks, Spring Compressor Tool for Cars Trucks ATVs More, 1.3 Ton Capacity

  • IDEAL FOR MOST VEHICLES: With a 9.5 inch range and 2646 pound capacity, Orion Motor Tech's universal coil spring compressor tool set works exceptionally well for parts found on most cars, pick-up trucks, ATVs, and other large vehicles.
  • SECURE LOCKING DESIGN: Each strut spring compressor combines dual hooked jaws with safety locking pins to make sure your large or small spring is secured in place for added safety.
  • BEEFY PRECISION RODS: The steel rods of our strut compressor are reinforced and precision threaded to offer exceptional strength and toughness you need for easy spring expansion and compression.
  • HEAVY-DUTY BUILD: Our strut spring tools boast high durability and corrosion resistance thanks to their heat-treated 45# steel construction and premium galvanized finish.
  • EASY STORAGE & TRANSPORT: Orion Motor Tech's strut compressors is packed with custom-fit EVA foam so everything stays well secured and organized between transport.
Check Stock

Tactical Bolt Knob for B-14 Rifles

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Prokomon Wheel Bearing Remover Installer Puller Tool Kit for Harley Davidson Motorcycles and for 0.75" 1" 25mm Bearings for Hogs from 2000, 11 Pcs

  • ◇【Material】Made of premium 45# stainless steel, this bearing installer and puller set provides strong and dependable long-term service.
  • the threaded rods are further heat treated and blackened for greater strength and corrosion resistance.
  • ◇【Application】This wheel bearing puller tool kit is compatible with most for Harley-Davidson motorcycles from 2000 to 2020.
  • ◇【Designed】to remove and install 3/4 inch, 1 inch and 25mm sealed type wheel bearings from 2000 and up without harming wheels.
  • ◇【Package Contents】 3/4 inch, 1 inch and 25mm pullers, A 3/4"/25mm installers, and a 1" installer.
  • ◇【Feature】Installing or removing their bearings in minutes, saving you time and money.
Check Stock

Powerbuilt 648692 Tie Rod Puller - 2 Piece Press Screw, Silver

  • Made of drop forged heat treated chrome vanadium steel for strength.
  • Drop forged and heat treated chrome vanadium steel for strength.
  • Fine threaded center screws for maximum torque.
  • Two different length center screws to fit a wider range of vehicles.
Check Stock

Lisle 41220 Thick Pickle Fork Set, 5pc.

  • The set includes five forks: 11/16", 15/16", 1-1/8", 1-7/16" and 1-5/8".
  • The forks are threaded to interchange with either the handle for hammering or the pneumatic driver (401 shank) and a 6-1/4" extension that works with either handle to provide extra reach.
  • The forks are heavy-duty forgings and the handles are heat-treated alloy steel The forks are heavy-duty forgings and the handles are heat-treated alloy steel.
Check Stock

Orion Motor Tech Spring Compressor, 11.5\ Universal Coil Spring Compressor, Heavy Duty Strut Compressor for Car Truck ATV UTV Motorcycle, Spring Compressor Tool Automotive 1/2\ Drive, 13/16\ Hex

  • IDEAL FOR MOST VEHICLES: This heavy-duty spring compressor tool by Orion Motor Tech repairs bent and damaged parts and performs the necessary suspension maintenance (recommended every 50-80,000 miles) on the MacPherson struts and springs found in most small and medium-sized cars.
  • SAFE & STABLE GRIP: The wide end pieces lock of the strut compressor on to your coil springs quickly and easily and keep a secure hold as you work, with locking pins offering additional security and precision.
  • EXTRA WIDE RANGE: Working with your manual or power tool's 1/2-inch square drive or 13/16-inch hex sockets, our Acme rods and end pieces of the strut spring compressor kit offer a 10.6 inch range, wider than the competition to work with more vehicles.
  • BUILT TO LAST: Our pair of heavy-duty strut spring compressors boasts high durability and corrosion resistance under even punishing use thanks to their heat-treated carbon steel construction, black oxide finish along the threaded rods, and galvanized end pieces.
  • 1-YEAR WARRANTY: Orion Motor Tech backs these spring compressors with a generous 1-year warranty as well as our usual friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

Tactical Precision Manufacturing Titanium Bolt Knob 5/16x24 - Dragon Scale - (Long) 1.90

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock