Categories

Best Heated Bed 3d Printer

USA Import Material 200x200mm 300W 24V Cube Flexible Silicone Heater Compatible with Voron V2.4 Prusa i3 RepRap 3D Printer Heated bed 24V

  • used for printing area 200x200mm 3D printer.
  • With 1meter NTC 100K 3950 thermistor for temperature Control. Power consumption: 300W. Attached with two pieces 1meter length power wire.
  • This heated bed is used with 200x200mm printing area 3D printers, but also compatible with Voron V2.4 3D printer which printing area is 250x250mm..
Check Stock

Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape, Easy Clean Removal up to 21 Days, Masking Tape

  • Wide Blue Painters Tape - Tapix 3d printer tape is easy to use and remove as well because of its width. The width allows you to put one stripe of tape to cover your print bed instead of cutting and pasting various 1-inch stripes of adhesion tape. For almost all types of the commonly used print bed, only one stripe of Tapix blue tape will be enough to cover your entire printer bed..
  • 3D Printing – Blue painters tape is the preferred use for 3D printing projects. It is simple, cheap and effective. Using our wide painters tape will make it easy to cover your whole 3D printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing..
  • Adhesive - Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind..
  • Premium Quality Blue Tape - Blue painters tape is strong, flexible, durable, and versatile. Our 3d printer tape is heat resistant so it can withstand up to 190°F/87°C heated beds and the heat of the filament..
  • Painting - Wide Blue Painters Masking Tape is a medium adhesive tape that leaves no damage and....
Check Stock

Wide Blue Painters Tape, 6 inch x 60 Yards, 3D Printing Tape, Easy Clean Removal up to 21 Days, Masking Tape

  • Wide Blue Painters Tape - Tapix 3d printer tape is easy to use and remove as well because of its width. The width allows you to put one stripe of tape to cover your print bed instead of cutting and pasting various 1-inch stripes of adhesion tape. For almost all types of the commonly used print bed, only one stripe of Tapix blue tape will be enough to cover your entire printer bed..
  • 3D Printing – Blue painters tape is the preferred use for 3D printing projects. It is simple, cheap and effective. Using our wide painters tape will make it easy to cover your whole 3D printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing..
  • Adhesive - Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind..
  • Premium Quality Blue Tape - Blue painters tape is strong, flexible, durable, and versatile. Our 3d printer tape is heat resistant so it can withstand up to 190°F/87°C heated beds and the heat of the filament. Available in several widths 4”, 6”, 9”, and 12”..
  • Painting - Wide Blue Painters Masking....
Check Stock

DOBSTFY 3D Printing Build Surface 3D Printer Heat Bed Platform Sticker Sheet 8 x 8 200x200mm Square - Pack of 4

  • 【PACK of 4】This 200x200mm (8"x8") Build Surface for Anet A8 WanHao i3 Detachable 3D Printers DYI, square, fully matches heated bed on many popular....
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature....
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides....
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible....
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours....
Check Stock

QIDI Technology X-one2 Single Extruder 3D Printer Metal Frame Structure,Platform Heating

  • ▶Excellent Choice - The Aquila is an open source 3D printer developed by the FDM Technology which offers a print volume of 220 x 220 x 250 mm, it is....
  • ▶Audo Feeding - Insert the filament into the guide wire tube, activate the auto feeding function then it will be automatically sent to the nozzle,....
  • ▶Carborundum Glass Heated Bed Platform - With strong adhesion and uniform heating, it can be heated to 70℃ within 2-3 minutes and keep uniformly....
  • ▶Intelligent Backup System - Aquila 3D printer has the ability to recover from a power failure. It will automatically create a save point when....
  • ▶Easy to Assemble - The printer comes with several pre-assembled parts. You can assemble the printer quickly by following the instructions or video.....
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

KIMME 1pcs Build Plate for Flashforge Finder 3D Printer

  • Flashforge Adventurer 3C, as a stripped-down version of Adventurer 3, remains main functions, making it a super cost-effective leveling-free 3d....
  • Out of the box,leveling-free, removable and heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG....
  • Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily . at the same time , it can minimize....
  • Detachable nozzle & fast heating: remove the nozzle from extruder just in one push.
  • Flashforge 3d printer Adventurer 3C,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

Creality TPU 3D Printer Filament 1.75 mm - Black | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance ±0.02 mm | Fit Most FDM Printers (1 Pc/Pack)

  • SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – Black | Dimensional Tolerance +/- 0.02 mm | Shore Hardness: 95A | Speed: 20-60mm/ | Recommended Nozzle Temperature: 215-235 ℃ | Recommended heat bed settings: No heat/ 60-80℃.
  • MATERIAL - With outstanding bed adhesion, no heated bed requirements, minimal warping, and abrasion resistance much higher than any other standard printing material, the uses and possibilities that TPU uncovers have revolutionized 3D printing for people around the globe..
  • UNIQUE FEATURES - Creality TPU 3D Printer filament is Soft adhesive with high elastic, Chemical resistance and environmental resistance, Waterproof and moisture proof and Environmental protection. The printing model is resistant to wear and scratch, with good aging resistance..
  • FIT MOST FDM PRINTERS - Creality TPU 3D printer filament is compatible with all FDM printers of Creality 3D, and you can create your artwork with this filament of high quality in just a few simple steps..
  • CHEMICAL RESISTANCE - TPU 3D Printer filament have Excellent chemical resistance (water resistance, oil resistance, solvent resistance) and environmental resistance, environmental protection, and nontoxic..
Check Stock

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

  • Anet ​3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
  • There is a 2 pin female connector on the thermistor for 3D printer.
  • Wire length for the thermistor: 1m/47 inches..
  • Recommended parameters for the thermistor: R25℃=100K.
Check Stock

ANYCUBIC Kobra Max 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Silver) Bundle

  • Eco-Friendly & Wide Compatibility, Made from starch raw materials derived from renewable plant resources, PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing..
  • Large Build Size: ANYCUBIC Kobra Max 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation..
  • Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience..
  • Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress..
  • Stronger Construction & Higher Precision: ANYCUBIC Kobra Max 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored.
Check Stock

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....
Check Stock

Voxelab Aquila 3D Printer,Fully Metal Frame,DIY FDM 3D Printer Kit with Removable Carborundum Glass Platform,Fully Open Source Design and Resume Printing Function Build Volume 220x220x250mm

  • 【Integrated Structure & Semi-assembled】:Fully metal frame design which sturdy and durable,users can quickly install according to the instructions....
  • 【Fast Heating & Resume Printing】: Voxelab Aquila 3d printer comes with a tempered glass plate on the heated bed, greatly resolving warped bed....
  • 【Upgraded Silent Mainboard 】Voxelab aquila 3d printer comes with upgraded silent Mainboard , allowing for quieter and more precise printing....
  • 【Fully Open Source】Aquila is a fdm printer based on open source technology. It allows users to improve their printer upon the source code and....
  • 【Warranty and Service】: All Voxelab 3d printers are provided lifetime technical assistance and 12-months warranty. if you have any question please....
Check Stock

CR10 S5 Silicone Heater Pad 508 x 508mm 20 X 20 Heated bed w/ 24 Holes For Creality CR-10 S5 3D Printer Large Print Bed Adhesive Backing + Sensor 120V

  • This silicone heating pad with 24 pre-made screw holes with dia 12mm as the picture shows is designed for creality CR-10 S5 3D printer building....
  • Our Manufactuer use Arlon silicone rubber substrate imported from the United States and 3M Adhesive Backing, highest quality. Each heated bed is....
  • CR10 S5 3D printer high temperateure heated bed.
  • Size: 508mmx508mm With 2 meters NTC 100K 3950 thermistor for temperature Control. Power consumption: 1300W Attached with two pieces 2meters length....
  • Caution! Before buying, please check if the 24 hole pattern conforms to that of your build plate. Pattern view from the adhesive side of this heater....
Check Stock