Categories

Best Heater Valve Coupler

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

  • ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
  • ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

Futurama Volume Four

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and....
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical....
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The....
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25....
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure....
Check Stock

Tapcooler Beer Valve Connector for Direct Keg Connection

  • DURABLE MATERIAL : 304 stainless steel construction makes the keg coupler more durable and sanitary. stainless will keep the best taste of your beverage, the healthy drinking is "on-the-go" !!.
  • NO LEAKS: Thoughtful 5/16" gas in barb & 3/16"' liquid out barb setting, allows air and beer line connection end closely to attach to coupler, Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking. Features fully integrated 55-PSI pressure relief valve as well as a ball check valve which prevents back flow of beer and can be easily removed for cleaning..
  • EFFORTLESS INSTALLATION: This coupler is easy to operate, you just need to simply push down and turn to properly couple the keg. Compared to handle-type low profile coupler, this low profile coupler avoids the space of operation handle and is designed with a 90° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing..
  • SPACE SAVING: Low profile D system coupler features a space saving....
Check Stock

MC Enterprises 91365MC Ignition Module for Dometic Water Heaters (Replaces 93851MC)

  • 【Standard 1/2'' Size】The thread size of our rv water heater drain plug is 1/2" NPT male threads, this RV water heater replacement drain valve great replacement for your RV water heater.
  • 【Additional Teflon Tape】Teflon tape is a necessity for replace hot water heater valve, made of PTFE material, has a sealing function to prevent the leakage of water.
  • 【Brass body and Steel Handle】The body of the drain cock is made of high quality brass, the top of the drain cock is made of hardened steel. Heavy duty hardened steel material and good structure can ensure that the rv water drain valve can provide long term service.
  • 【Perfect Replacement】This upgraded water heater drain valve is ideal for RV, camper, and trailer water heater, this rv water tank drain valve effectively solve your leakage problem on the water heater..
  • 【Tips】You should flip open the hot water pressure relief BEFORE draining. That will take any pressure off of the tank. And add thread tape to both the large and small nut before you install.
Check Stock

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

Aupoko R134A R12 Valve Core Quick Remover Installer, Air Conditioning Adjustable High Pressure (Red) and Low Pressure (Blue) Valve Core Tool, 2 Pack

  • ...valve core remover installer designs for using of servicing valves to remove and install the valve core R134 or R12 from a 1/4-inch male flare access fitting in AC systems without the loss of refrigerant. Excellent for replacing valve cores without discharging or reclaiming the system..
  • ☀ HIGH & LOW PRESSURE QUICK COUPLER --- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ☀ ADJUSTABLE --- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ☀ WELL-DESIGN --- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ☀ 1 YEAR WARRANTY --- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, if it can’t work normally during the warranty time or any other question, please feel free to contact us, we will refund or reship for you without any reason..
Check Stock

EZ Snap Covers 9 Foot Long Standard Height 7 1/2″ Baseboard Heater Cover Kit with 2 Closed End Caps

  • EZ Snap Covers are 20 gauge galvanized steel with white epoxy powder coating. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. End caps are 18 gauge thickness..
  • Our covers fit 95% of all existing hot water baseboard radiator heaters. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills..
  • Lengths over 8’ include a coupler to join the panels together. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler.
  • 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler.
  • 13’ is 1 6’ and 1 7’ and a coupler.
  • EZ Snap Covers have a lifetime warranty against rust. If they rust, send them back and we will replace them..
Check Stock

FloodStop Water Heater Auto-Shutoff Valve, FS3/4NPT, V4 Controller, Water Damage Prevention

  • PREVENT WATER DAMAGES – This automatic shut off valve will trigger when a leak is detected from your water heater, potentially preventing 200+ gallons of water leaking into your home..
  • EASY TO INSTALL – The FloodStop valve is installed between the water heater and the manual shutoff valve.
  • SENSOR AT BASE OF HEATER – The sensor part of this system is placed at the base of the water heater. As long as the sensor stays dry, the valve will stay open permitting water to flow through to the heater..
  • IMMEDIATE SHUTDOWN – Once the leak sensor at the base of the heator senses moisture, the valve will immediately close off all water flow and sound alarms..
  • CERTIFIED LEAD FREE – Certified lead free under S. 3874, AB1953 with a One Year Manufacturer’s Warranty..
Check Stock

Yaeccc 4500PSI Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

Boskavalo 64219310349 Heater Control Valve 64119310349 for BMW F01 F02 F10 F11 F12 520i 523i 528i 740i 740Li 750Li

  • 【FITMENT】 - 100% Brand new, brand guarantee, bear any after-sales problems. Heater Control Valve .Replacing OE numbers are 64114271156, 64119119164, 64 21 9 310 349, 64219310349.
  • 【QUALITY】 - Each Heater Control Valve is manufactured to the same specifications as the factory actuators. Each actuator is constructed with precision machined parts and includes new oil seals for a leak free installation. Standard performance & durability TS16949 Certified Manufacturer..
  • 【FUNCTION】 - Heater Control Valve，Turn on or turn off the water flow of the heating water tank. When the weather is hot, the water valve is closed, and when the weather is cold, it opens to heat the interior of the car.
  • 【INSTALLATION TIPS】 - To ensure safety and normal usage of our product,please let professional auto mechanic to install this Heater Control Valve.
  • to avoid damaging the mechanic or causing accidents,please do not dismantle the products.
  • 【NOTICE】 - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our Heater Control Valve . Please contact us if you have any question regarding our this product.
Check Stock