Categories

Best Heater Valve Repair Kit

XtremeAmazing Heater Hose Repair Fitting Kit with Adapter Hose for 3.8L V6 Camaro Firebird 95-02

  • Compatible with 95-02 3.8L V6 Camaro / Firebird With 5/8" Heater Hose.
  • This kit includes 2 adapters, which bolt into your tensioner/heater inlet assembly, adapter mount screws, a 3/4" to 5/8" plastic heater hose adapter, 10" of 5/8" heater hose, and 4 stainless steel hose clamps. This kit will allow you to repair your broken heater hose ends on the 95-02 V6 Camaro/Firebirds that have the 3/4" and 5/8" heater hoses. This allows for easier repair in 1 complete kit so you can retain your stock 3/4" heater line..
  • NOTE : Camaro/Firebirds have models with 2 - 5/8" heater hoses, and models with 1 - 5/8" and 1 - 3/4" hoses. If your Camaro/Firebird has 2 of the 5/8" heater hoses, you need our 5/8" repair kit instead. This kit is for the cars with the 2 size hoses at the tensioner..
  • Package Contents: 1x Heater Hose Repair Fitting Kit.
Check Stock

Propane Tank Top Heater Safety Kit Replacement Parts Propane Gas Patio Heater Repair Replacement Parts Safety Faston Type Thermocoupler Safety Assembly Kit and Fd4 Dump Safety Switch Control

  • Propane Tank Top Heater Replacement Parts Safety Faston Type Thermocouple Safety Assembly Kit with FD4 Dump Switch Is a Repair Replacement Part for....
  • Fits prpane tank top heater for most brand like Mr Heater, Dura Heat, COSTWAY, REMINGTON,ProCom and other most tank top heater with white faston....
  • Thermocoupler length 20inches with one FD4 weak current tilt dump switch gas R≤10 mΩ.
  • Thermocoupler set includes two parts with white faston type....
  • The round ring terminal should be connect with the valve screw or any metal part.
  • Special Design for Gas heaters Outdoor heaters Gold plated connectors....
  • CE & CSA Approved safety thermocouple replacement parts for propane tank top heater. (Not suitable for Texsport heater or similar main control valve).
Check Stock

Hourleey 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve Clean Brass

  • Package include: 3/4 Inch Isolation Kit involves hot and cold valves 500WOG with 1/4 red and blue handles, equipped with full port ball valve for....
  • Easy to use: Tankless water heater repair valve 500WOG, red and blue valve handle, easy to identify hot and cold valves.
  • Material: Components are certified lead-free brass, Meets all federal and state standards regarding lead content in drinking water system components.....
  • Standard size: The tankless kit works with all 3/4 inch size is suitable for most American residential usage, both residential and commercial gas....
  • Good Service: If any problem, please feel free to contact us, Prince Team offer replacement and full refund services..
Check Stock

SmartPool WWSK21 SunHeater Systems Kit

  • Install and operate your Sun heater solar pool heater with the Smart Pool Sun heater Systems Kit.
  • Setup kit can be used with up to four boxes of Sun heater in-ground pool solar heaters.
  • Pool accessory kit contains everything you need to complete the installation.
  • Includes all necessary valves and mounting hardware.
  • Includes DIVERTER valve, hose, 2 pipe adapters, end cap, vacuum relief cap, SS brackets, 2-inch #14 SS screws, 100-foot strap, check valve, 3 SS hose clamps,.
Check Stock

Xiny Tool 3/4-Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve Clean Brass

  • Package include: 3/4 Inch Isolation Kit involves hot and cold valves 500WOG with 1/4 red and blue handles, equipped with full port ball valve for....
  • Easy to use: Tankless water heater repair valve 500WOG, red and blue valve handle, easy to identify hot and cold valves.
  • Material: Components are certified lead-free brass, Meets all federal and state standards regarding lead content in drinking water system components.....
  • Standard size: The tankless kit works with all 3/4 inch size is suitable for most American residential usage, both residential and commercial gas....
  • Good service: reply online within 24 hours, if you have any questions, we will serve you at any time..
Check Stock

EXCELFU Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit Suitable for Gas Grill Fire Pit Fireplace & Heater

  • CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread, Low Working Pressure Max 1/2 PSI (65mbar).
  • Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use.
  • Length of Thermocoupler: 600mm, Head Tip: M8*1 (This is Low pressure control valve max rating BTU 50000).
  • Platic Black Bakelite Knob Diameter: 38mm, "D" Insert for Valve: 6.0-6.1mm.
  • Appliction: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar).
Check Stock

DRELD Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with 5/8” -18UNF Inlet Outlet Thermocouple Knob Switch, Fits for Gas Grill, Heater, Fire Pit

  • SIZE: 750 mm thermocouple with M8*1 threaded head. Bakelite knob OD 38mm, D shaft 6.1mm..
  • APPLICATION: The kit is suitable for low pressure repair control system for Gas Grill, Heater, Fire Pit, & Fireplace..
  • MATERIAL: The fire pit gas control valve kit is made of brass and plastic for durable use. Not OEM but fits OEM Standards..
  • HOW TO USE: Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. Connect your inlet and outlet hose on inlet and outlet side. Fix the thermocouple nut M8 on the valve end tightly. Connect thermocouple and end thread well. Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. Release your hand and it works properly. If the gas valve shut off again when you release hand, then please check..
  • AFTER SALES SERVICE: The Propane Fire Pit Kit Replacement Part completed with a One-year Warranty. Should be there any question, please feel free to contact us..
Check Stock

WADEO Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit, Low Pressure Propane Fire Pit Replacement Part with 3/8\ Flare Inlet & Outlet

  • Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use..
  • Application: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater.
  • Size: Thermocouple Length: 600mm/23.62inch.
  • CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread (Max BTU rating: 50000, Working Pressure Max 1/2 PSI, 65 mbar).
  • Package Included: Valve, Thermocouple, Plastic Black Bakelite Knob.
Check Stock

Watts Premier 560075 Sensor Valve Kit for Hot Water Recirculating System

  • Additional Sensor Valve Kit for use on branched hot water lines with Watts Premier Hot Water Recirculation Pumps coming from the water heater. Kit comes complete with one sensor valve, two 12 inch supply lines with fittings..
  • Compatibility: This valve works only with models 500800, 500803, 500805, and 500899..
  • This kit must be used in conjunction with either a 500800 or 500805 Hot water Recirculating Pump. It is NOT designed to be used with a dedicated return line to the water heater..
  • Product Dimensions: Width: 1 3/8 inches, Length: 4 5/16 inches.
Check Stock

HZ-MONSTAR Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with Igniter Assembly Fire Pit Igniter, Push Button Ignition Kit for Gas Grill, Heater, Fire Pit

  • [APPLICATION] --- The fire pit gas control valve kit suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)..
  • [UPGRADED-BUTTON IGNITER] --- The upgraded button igniter also greatly reduces the time required to generate sparks. The fire pit igniter using pop-up switch, more to meet people's needs..
  • [HIGH QUALITY] --- The fire failure safety control valve kit are made of brass material with heavy-duty construction for durable use..
  • [SPECIFICATION] --- Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread. And length of thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000). Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm..
  • [Service Warranty]---We offer 1 year warranty. If it fails, feel free to contact us. we will reply within 24 hours..
Check Stock

Fortpro AD-IP Style 12V Air Dryer Replacement for Bendix 109477, 065612 | F224898

  • Direct replacement for R950015, MTRR950015, Heater Assembly Repair Kit 12V.
Check Stock

HolaKit Tire Plug Kit 22PCS Compact Tire Repair Kit with Rubber Plugs Upgrade T-Handle 4-Way Valve Steam Tool Flat Tire Puncture Repair Tools for Cars Motorcycle ATV SUV

  • 【Emergency Kit for Flat Tire】The Tire Repair Kits can help you get back on the road quickly when you get a flat tire. This tire repair kits is suitable for tubeless tires of cars, SUVs, motorcycles, enduro bikes, or lawn mowers..
  • 【Compact Tire Plug Kit】This tubeless tire repair kit is designed to be packed in compact plastic box. The box fits perfectly into the space of glove box. With a storage box, you can find the kit easily after several time uses.
  • 【Upgrade T-handle】 The Handle is 100mm long which is bigger than common T-handle tire patch kit.The material of the handle is made of two layers: hard plastic inside and soft thermoplastic rubber outside. Both of the features will allow you to use it with less effort and comfor.
  • 【Bonus of Valve Tools】The tire repair tools includes T-Handle Rasp Tool, T-Handle Insert Tool, 10 x Self-Vulcanization Tire Plugs, Knife. And also include a valve tools set: 4-way valve steam tools, 4 x Standard Valve Cores, 4 x Standard Valve Caps..
  • 【Premium Quality】HolaKit Tire repair kit with plugs are made of refined high quality steel and whole new material, which makes the metal part very hard, while the plastic part is very flexible and pollution-free..
Check Stock

P1TOOLS Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit （Low Pressure Propane Valve with 3/8\ Flare Inlet & Outlet）, Suitable for Gas Grill, Heater, Fire Pit

  • Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread.
  • Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use..
  • Size: Thermocouple Length: 600mm/23.62inch.
  • Application: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater.
  • For more installation details and possible problems, see the detailed description below.This universal valve assembly requires some hands-on capability for DIY replacement..
Check Stock