Categories

Best Heavy Duty Flange Nut

POWERTEC QTN1108 Screw-On Tee Nut 5/16” x 18 8PK Zinc Plated Carbon Steel for Indoor/Outdoor Use - Screw On Flange T Nuts for Non-Rotating Fastening in Your Woodworking Shop

  • ...n design makes for easy, precise non-rotating installation. Simply pre-drill the hole of the nut, accommodating the screw’s 15/32” OD. Three side protrusions on the OD of the screw further enhance positive lock against loosening, even with heavy-duty use. Install utilizing the 3 pre-drilled holes on the nut’s flange..
  • APPLICATIONS: Allows for the easy attachment of wooden legs, feet, glides, casters, levelers, and other components to your furniture, cabinets, shelves, and more. This nut inserts flush to the mating surface to ensure a polished look to your finished pieces..
  • COMPATIBILITY: Works with 5/16”-18 threaded bolted components.
  • Get the value-added advantage with the handy 8PK: Includes (8) Screw on Tee Nuts and (24) mounting screws.
  • Thread size: 5/16” x 18 TPI, Nut OD: 15/32”, Flange DIA: 1-1/4”.
Check Stock

QiiMii Stainless Steel 304 Heavy Duty Tri Clamp Clover Single Pin with Wing Nut for Ferrule TC 2 inch 10 pack

  • Tube OD: 2 Inch, Flange Size: 64MM, Fits 2 Inch Tri-clamp.
  • Type: stainless steel 304 Single pin heavy duty clamp with cross hole wing nut.
  • Fit for all other homebrew stuff sanitary fittings.
  • Free Bonus: Buy Clamps, Get Gasket For Free.
Check Stock

BestEquip Push Beam Trolley, 1100lbs Load Capacity Manual Trolley, 1/2Ton I-Beam Trolley, Heavy Duty Beam Trolley Hoist w/Dual Track Rollers, 2.5in - 5.5in Adjustable Flange for Lifting, in Steel

  • Solid Steel Construction: The push beam trolley is crafted with heavy-duty steel for ultimate durability. The solid steel construction has a durable powder-coated finish for added strength that you can depend on during heavy lifting..
  • Excellent Loading Capacity: We understand that heavy loads can make daily routine hard to carry out. That why we came up with our hoist, which has a maximum lift of 4400 lbs to make working with heavy load an enjoyable process..
  • that why our trolley comes with sturdy lock-nut and lifting ring to ensure you are always safe while operating it. It is stable enough in your workplace..
  • Adjustable i-Beam Flange Width: The push beam trolley comes with a sealed bearing to adjust the width to fit standard or wide flange I-beam track. Adjustable width: 2.5''-5.5''. The Adjustment Washers is included..
  • Wide Application Area: It can be widely used in factories, mines, docks, warehouses, construction sites, etc. for the installation of machinery, lifting goods, equipment maintenance..
Check Stock

Orhemus Brass P Trap 1 1/4 Bathroom Basin Sink Waste Trap Drain Kit with Flange and Slip Joint Extension Tube Drain Tailpiece Adjustable Height Brushed Nickel Finish

  • 【PREMIUM BRASS】Our P trap is made of heavy duty solid brass. Expertly crafted and leaking free, durable for lifetime use. All metal: brass....
  • 【EXTENSION TUBE INCLUDED】You will find it convenient to install the p-trap because the kit comes with the extension tube for extending lavatory....
  • 【STANDARD SIZE】Standard P-trap with flange and extension tube. 1-1/4 inch Slip Inlet. Fit US plumbing..
  • 【BRUSHED NICKEL】Awesome finish which is rust-resistant and corrosion-resistant. Modern and contemporary design provides a clean compact solution....
  • 【EASY INSTALLATION】Our P-trap kit comes with all parts needed to install, includes the decorative flange, nut, extension tube and teflon tape. It....
Check Stock

POWERTEC QTN1115 4 Prong T Nut | 50 Pack Tee 3/8 Inch-16 by 7/16-Inch – Threaded Inserts for Climbing Holds and Wood Working Other

  • FUNCTION: Tee Nuts are used for fastening harder materials, such as metal to wood or softer woods to plastic, helping to minimize splitting of the mating surface.
  • PREMIUM QUALITY: Each pronged t-nut is made from heavy duty steel and feature an anti-rust/ corrosion resistant zinc plated design for long lasting durability.
  • APPLICATIONS: These multi-functional fasteners provide a stable and non-rotating nut placement for an assortment of DIY task, furniture restoration, woodworking projects, and can even be used for rock climbing holds.
  • DIMENSIONS: Thread size: 3/8-Inch UNC-16, Flange Dia: 1-Inch, Barrel Height: 1/2-Inch, Prong Height: 5/16-Inch, Drill Size: 29/64-Inch.
Check Stock

Orhemus Brass P Trap 1 1/4 Bathroom Basin Sink Waste Trap Drain Kit with Flange and Slip Joint Extension Tube Drain Tailpiece Adjustable Height Oil Rubbed Bronze Finished

  • 【PREMIUM BRASS】Our P trap is made of heavy duty solid brass. Expertly crafted and leaking free, durable for lifetime use. All metal: brass....
  • 【EXTENSION TUBE INCLUDED】You will find it convenient to install the p-trap because the kit comes with the extension tube for extending lavatory....
  • 【STANDARD SIZE】Standard P-trap with flange and extension tube. 1-1/4 inch Slip Inlet. Fit US plumbing..
  • 【OIL RUBBED BRONZE】Awesome finish which is rust-resistant and corrosion-resistant. Modern and contemporary design provides a clean compact....
  • 【EASY INSTALLATION】Our P-trap kit comes with all parts needed to install, includes the decorative flange, nut, extension tube and teflon tape. It....
Check Stock

Taytools 775936 Heavy Duty Workbench Vise Screw with 3 TPI Acme Threads 18 Inch Capacity

  • This heavy duty vise screw will allow you to build a custom workbench vise. The flange and threaded nut and built for durability and made from high strength cast iron with a black powder coat finish..
  • The lead screw is precision machined to allow smooth operation when opening and closing..
  • Lead screw is 1-3/16 inch diameter with single-lead Acme threads and 3 threads per inch..
  • Clamping capacity is 17 inches (less the thickness of the jaw). Overall length is 21-1/4 inches..
  • Will accept a 1 inch diameter handle (not included)..
Check Stock

LS1 Harmonic Balancer Installer Crank Pulley Installer Crankshaft Installation Tool For GM LS1/LS Engines 1997~Current

  • Great Compatibility — Works on all GM LS & LT series engines 1997-current (Gen 3, 4, & 5)..
  • Upgrade Design — Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
  • Special Features — Includes 1×Threaded Rod, 1×Flange Nut and 2×Washers. Threaded rod is hardened 94 Rockwell and hardware is grade 10.9..
  • Superior Quality — Premium grade heat-treat heavy duty steel, galvanized steel nuts and aluminum washers, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life..
  • 100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

POWERTEC QTN1102 4 T 50 Pack | Pronged Tee Nut ¼ Inch-20 & 9/16-Inch – Threaded Inserts for Climbing Holds and Wood Working, 1/4\-20 x 9/16\

  • FUNCTION: Tee Nuts are used for fastening harder materials, such as metal to wood or softer woods to plastic, helping to minimize splitting of the mating surface.
  • PREMIUM QUALITY: Each pronged t-nut is made from heavy duty steel and feature an anti-rust/ corrosion resistant zinc plated design for long lasting durability.
  • APPLICATIONS: These multi-functional fasteners provide a stable and non-rotating nut placement for an assortment of DIY task, furniture restoration, woodworking projects, and can even be used for rock climbing holds.
  • DIMENSIONS: Thread size: 1/4-Inch UNC-20, Flange Die: 23/32-Inch, Barrel Height: 19/32-Inch, Prong Height: 17/64-Inch, Drill Size: 5/16-Inch.
  • PRODUCT : Includes a 1 year manufacturer ensuring customer satisfaction.
Check Stock

POWERTEC QTN1103 4 T 50 Pack | Pronged Tee Nuts 5/16 Inch-18 & 3/8-Inch – Threaded Inserts for Climbing Holds and Wood Working, 5/16\-18 x 3/8\

  • FUNCTION: Tee Nuts are used for fastening harder materials, such as metal to wood or softer woods to plastic, helping to minimize splitting of the mating surface.
  • PREMIUM QUALITY: Each pronged t-nut is made from heavy duty steel and feature an anti-rust/ corrosion resistant zinc plated design for long lasting durability.
  • APPLICATIONS: These multi-functional fasteners provide a stable and non-rotating nut placement for an assortment of DIY task, furniture restoration, woodworking projects, and can even be used for rock climbing holds.
  • DIMENSIONS: Thread size: 5/16-Inch UNC-18, Flange Dia: 7/8-Inch, Barrel Height: 25/64-Inch, Prong Height: 17/64-Inch, Drill Size: 3/8-Inch.
  • PRODUCT : Includes a 1 year manufacturer ensuring customer satisfaction.
Check Stock

POWERTEC QTN1106 4 T 50 Pack | Pronged Tee Nut Inch-16 & 1/2-Inch – Threaded Inserts for Climbing Holds and Wood Working 3/8 -16 x 1/2 50PK

  • FUNCTION: Tee Nuts are used for fastening harder materials, such as metal to wood or softer woods to plastic, helping to minimize splitting of the mating surface.
  • PREMIUM QUALITY: Each pronged t-nut is made from heavy duty steel and feature an anti-rust/ corrosion resistant zinc plated design for long lasting durability.
  • APPLICATIONS: These multi-functional fasteners provide a stable and non-rotating nut placement for an assortment of DIY task, furniture restoration, woodworking projects, and can even be used for rock climbing holds.
  • DIMENSIONS: Thread size: 3/8-Inch UNC-16, Flange Dia: 1-Inch, Barrel Height: 15/32-Inch, Prong Height: 7/16-Inch, Drill Size: 29/64-Inch.
  • PRODUCT : Includes a 1 year manufacturer ensuring customer satisfaction.
Check Stock

Angle Grinder Spanner Wrench 12 pcs Angle Grinder Flange Nuts with 2 pcs Spanner Angle Grinder Flange Replacement for Makita Ryobi Dewalt Milwaukee Craftsman

  • ★Return your hand-held power grinder to its full operating capacity with this angle grinder flange nut for 5/8.
  • ★14pcs include: 6 x inner angle grinder flange nuts, 6 x outer angle grinder flange nuts and 2 spanners.
  • ★The Angle Grinder Spanner wrench is approx. 5.5”/ 140mm length, and for the flange nut, the outer diameter is 0.55”/14mm, the inner diameter is....
  • ★The grinder angle spanner wrench flange nut kit is made of carbon steel, durable and stable.
  • ★NOTE: All grinders are different, all brands have different size grinders, look over your grinder and find the info on the tool, find the size for....
Check Stock

VEVOR Beam Trolley 1100 LBS/0.5 Ton Capacity with Side Guide Rollers 1.6\-3.3\ Adjustable Width

  • Heavy Duty Beam Trolley: This heavy-duty manual trolley has 1100 lbs/0.5 ton load capacity, designed for horizontally transporting loads. It can also be used to position or traverse multiple manual or powered hoisting equipment..
  • Adjustable I-beam Width: Adjustable width: 1.6"-3.3" / 40-85 mm. The push beam trolley comes with metallic gaskets to quickly adjust the width to fit multiple types of I-beam tracks with different flange width..
  • Well-designed Details: This manual trolley is equipped with dual wheels and side guide rollers. With the help of the dual wheels, the trolley can glide smoothly and work both on straight and curved tracks to satisfy your different needs. It can also avoid wear and tear on i beam tracks..
  • Security First: Our trolley is equipped with sealed bearings, built-in bumper guards, lock-nut & lifting ring to ensure you are always secure while operating it..
  • Versatile Use Scenarios: Our hoist trolley is mainly used in the mechanical equipment of infrastructure construction projects such as electric power, automobile manufacturing, highways, bridges, metallurgy, mines, slope tunnels and is an ideal material handling tool for docks, warehouses, garages, and other industrial areas..
Check Stock