Categories

Best Heavy Duty Lever

Powerlifting Lever Belt - 10mm or 13mm Weight Lifting Belt USPA & IPL Approved for Heavy Weightlifting - Lower Back Leather Support for Deadlifts and Squats Medium 13mm - All Black

  • .... Our weight lifting belt is finished with top quality, fine suede providing a non-slip surface. The 10mm thickness provides good support with more comfort, while the 13mm thickness will provide maximum support for maximum strength..
  • ✅ NEW AND IMPROVED LEVER: Our clip weightlifting belt features a new and improved heavy-duty steel lever to give you maximum compression and support. The new redesigned, stronger lever gives you the quality you expect from our products. Levers allow you to achieve levels of tightness and compression that no prongs can match. The lever is fully adjustable with only 2 screws to remove so you can adjust the belt to your waist size specifically. Competition approved: USPA & IPL.
  • ✅ MAXIMUM SUPPORT: With a thickness of 10mm and a height of 4" across its length, this power belt ensures your back, abs and entire core are evenly stabilized for ultimate power and strength during your lifts. It only takes a second to achieve maximum support and to loosen thanks to the heavy-duty lever..
  • ✅ HEAVY DUTY: Our powerlifting lever belts should only be used by lifters looking to improve strength levels considerably while protecting their lower backs. If you’re looking for the maximum amount of support to lift the maximum amount of ....
Check Stock

Iron Bull Strength Powerlifting Lever Belt - 13mm Power Weight Belt - 4-inch Wide - Heavy Duty for Extreme Weight Lifting Black Large

  • ✅ NEW AND IMPROVED BELT ✅ PREMIUM 13MM THICK SUEDE LEATHER: Our power lifting lever belt features 13mm thick, solid, exclusive genuine....
  • ✅ NEW AND IMPROVED LEVER ✅ Our 13mm weight lifting belt features a new and improved heavy-duty steel lever to give you maximum compression....
  • ✅ MAXIMUM SUPPORT: With a thickness of 13mm and a height of 4" across its length, this power belt ensures your back, abs and entire core are....
  • ✅ HEAVY DUTY: Our 13mm powerlifting lever belt should only be used by serious and extreme lifters only. If you’re looking for the maximum....
  • ✅ SIZING CHART: Please use sizing chart in listing images to order the correct size. You need to measure your true waist size with a flexible....
Check Stock

XSTRAP STANDARD Ratchet Tie Down Straps 4 Pk 15 Ft - 500 Lbs Load Cap - 1500 Lb Break Strength, Cargo Straps for Moving Appliances, Lawn Equipment - Includes 2PK Bungee Cord and Storage Box

  • Heavy Duty Design: These tie-down 2 inch ratchet straps are designed with industrial-grade materials and construction, ensuring that they can handle heavy loads and rough conditions with ease. Assembly Break Strength of 10,000 pounds, Working Load Limit of 3,333 pounds..
  • J-Hook Attachment: The included J-hooks make it easy to secure loads without the need for additional hardware or attachments. Simply hook the heavy duty straps onto your cargo and ratchet them down for a secure hold..
  • Wide Compatibility: These heavy duty 2 inch ratchet straps with j hooks are compatible with a wide range of cargo, including vehicles, furniture, appliances, and more. They can also be used on trailers, pickup trucks, and other types of transportation..
  • Easy to Use: The heavy duty ratchet strap mechanism allows you to easily and quickly tighten the straps, while the release lever makes it easy to loosen and remove the heavy duty tie down straps when you're done..
  • ROBUST RATCHET - The 4" wide handle ratchet mechanism (and wire J-hooks!) are made of zinc-coated steel to protect against rust and corrosion. The large release lever makes it easy to tension the strap - Quick loader ratchet straps.
Check Stock

2 Tie-Down Ratchet Straps J-Hooks, 2 Heavy Duty 2\ x 27' Tie-Down Ratcheting Cargo Truck Straps Wire Hook Ends, J-Hook Ratchet Strap Tie-Downs

  • Heavy Duty Design: These tie-down 2 inch ratchet straps are designed with industrial-grade materials and construction, ensuring that they can handle heavy loads and rough conditions with ease. Assembly Break Strength of 10,000 pounds, Working Load Limit of 3,333 pounds..
  • J-Hook Attachment: The included J-hooks make it easy to secure loads without the need for additional hardware or attachments. Simply hook the heavy duty straps onto your cargo and ratchet them down for a secure hold..
  • Wide Compatibility: These heavy duty 2 inch ratchet straps with j hooks are compatible with a wide range of cargo, including vehicles, furniture, appliances, and more. They can also be used on trailers, pickup trucks, and other types of transportation..
  • Easy to Use: The heavy duty ratchet strap mechanism allows you to easily and quickly tighten the straps, while the release lever makes it easy to loosen and remove the heavy duty tie down straps when you're done..
  • ROBUST RATCHET - The 4" wide handle ratchet mechanism (and wire J-hooks!) are made of zinc-coated steel to protect against rust and corrosion. The large release lever makes it easy to tension the strap - Quick loader ratchet straps.
Check Stock

Schiek Sports 7010 Lever Competition Power Weight Lifting Belt - Large - Black

  • This belt is extra firm and features reinforced neoprene.
  • Equipped with a heavy duty lever closure system with an embossed Schiek logo on the front.
Check Stock

Schiek Sports 7010 Lever Competition Power Weight Lifting Belt - Medium - Black

  • This belt is extra firm and features reinforced neoprene.
  • Equipped with a heavy duty lever closure system with an embossed Schiek logo on the front.
Check Stock

Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6\ x 10.2\ Mounting Holes - S2979-HD

  • Heavy duty replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern.
  • Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders.
  • Tilt control - push lever in to lock tilt, pull out to unlock.
  • Twist hand wheel to tighten or loosen (adjust) backward tilt tension.
Check Stock

Handcrafted Nutcracker for Pecans English Walnuts Almonds Filbert Hazelnuts- Uses Rubberband Power

  • Heavy Duty Nutcracker - Easy cracking nuts, pecan,hazelnuts, almonds, walnut, Brazil nuts. NOTE: MAY NOT WORK FOR HARD BLACK WALNUT.MACADAMIA and....
  • (Updated) Strong Construction- This nutcracker is with fashion wood base with solid built steel construction. Heavy duty nut cracker withstands wear....
  • Lever Nut Cracker- Lever design for easy cracking nuts. Simply just push down the wood handle to crack nuts. It makes cracking nuts simple and more....
  • Fits All Sizes of Nuts- With adjustable threaded cone for different Length of nuts even large size nuts..
  • Best gift idea for holiday Christmas gift..
Check Stock

FlexzFitness Lever Replacement for Weightlifting Belt Powerlifting Buckle

  • LEVER REPLACEMENT: Fits most standard lever belts including 10mm and 13mm weightlifting belts.
  • HIGH QUALITY METAL: Our solid piece metal buckle will withstand the forces applied on the belt during a squat or deadlift.
  • EASY ASSEMBLY: Includes Lever, plate and 2 screws for easy assembly to your lever belt..
  • BUILT TO LAST: Heavy Duty Shine Chrome Finish with stiff hinges and strong pins to ensure secure lifting.
  • 100% SATISFACTION GUARANTEE: FlexzFitness is confident you'll absolutely love our Lever replacement. If somehow you aren't 100% satisfied, just contact us!.
Check Stock

PRO-TING Replacement Lever for Powerlifting Lever Belts Golden

  • Easy to replace：Only two screws connect the lever to the belt, remove the old screw and replace it with a new one..
  • Easy to adjust：Suitable for all sizes of adjustable heavy-duty lever buckles..
  • The lever buckle comes with screws and levers. You can replace any damaged items on the belt without buying a new lever belt..
  • There is a full purchase price refund within 30 days of your purchase if you are not happy for any reason..
Check Stock

Pry Bars Protector, 3 Pcs Tire Raking Machine Lifting Tool Lever Tyre Machine Crowbar Protective Cover

  • Protect Rims : The motorcycle tire lever is designed to reduce damage the wheel rims when fitting or removing tires, tire rim protector helps to protect your rims from scuffs and scratches when changing tires..
  • Heavy Duty Steel : Made of hardened automotive grade steel with polished chrome finish, the tire lever tool spoon is heavy duty, weatherproof and rust resistant..
  • Anti-slip Handle : Plastic handle of this spoon tool will fit your hand and make tire changing task easy..
  • With Rim Protector : Premium plastic construction of the tire rim protectors makes it a durable item to choose..
  • Application : Great for many motorcycles and bikes tire changes in the garage or travel use..
Check Stock

Anwenk Nutcracker Heavy Duty Nut cracker Pecan Cracker Walnut Cracker Plier Opener Tool Desktop Wood Base & Handle (Updated)

  • Heavy Duty Nutcracker - Easy cracking nuts, pecan,hazelnuts, almonds, walnut, Brazil nuts. NOTE: MAY NOT WORK FOR HARD BLACK WALNUT.MACADAMIA and similar HARD shell nuts..
  • (Updated) Strong Construction- This nutcracker is with fashion wood base with solid built steel construction. Heavy duty nut cracker withstands wear and tear..
  • Lever Nut Cracker- Lever design for easy cracking nuts. Simply just push down the wood handle to crack nuts. It makes cracking nuts simple and more fun!.
  • Fits All Sizes of Nuts- With adjustable threaded cone for different Length of nuts even large size nuts..
  • Best gift idea for holiday Christmas gift..
Check Stock

Passage Door Handle, Matte Black Closet Passage Door Handle, Passage Lever Interior Door Handle Black, Black Passage Door Knobs Reversible for Right & Left Side, 4 Pack

  • ...atch with backset 2-3/8"(60mm) or 2-3/4 '' (70mm), Fit all standard door thickness:1-3/8" to 1-3/4"..
  • 【Easy Installation】Reversible Passage Lever fits both right and left handed doors. All accessories included,very Easy to install. No need professional door fitters. A good helper for save money and save time..
  • 【Heavy duty & High durability】Our Passage Lever Door Handle all made from Heavy Duty Zinc Alloy and Metal, Matte Black Finish, Conformed with ANSI Grade 3 Exceeds 200,000 cycles and 5 pins brass tumbler cylinder, providing lasting durability, security and smooth touch..
  • 【Free Replacement & Full Refund Service】---We wholeheartedly provide you with a one-year warranty period. During the maintenance period, if you have any questions or any unsatisfied, you can contact with us any time. We will provide you with a 100% refund service. Happy shopping!!!.
Check Stock