Categories

Best Heavy Duty Torsion Springs

Extra Heavy Duty Garage Door Pulley - 3 INCH 200LB

  • Cable and Pulley Replacement Kit for Torsion Spring Doors up to 12 Feet Tall & Extension Spring Door to 9 Feet Tall..
  • TWO PAIRS OF LONG CABLES, 1/8"x 168 inches 7x19 Strand [7 x 19(7 strands-19 wires per strand)], 3/32" x 156 inches 7x7 Strand, FUSION CUT ENDS.
  • Each pulley is 200 lb. Load rated for doors up to 400 lbs. The 3/32" cables with 7 x 7 strand has a rating of 960 pounds, The 1/8" cables with 7 x 19 strand and rated at 2000 pounds..
  • Design to work on a multitude of doors with torsion springs or extension spring setup..
  • Package included: 2 Heavy Duty Pulleys for front or rear, 2 Clevis Forks, 2 Bolts, 2 Nuts, AND 4 Cables..
Check Stock

Chamberlain Craftsman LiftMaster 108D36 Light Lens Cover Garage Door Opener

  • Type Heavy Duty 12 Gauge Galvanized Steel.
  • Adjustable To Utilize 1 3/4" And 2" Torsion Springs.
Check Stock

DURA-LIFT Heavy Duty Extension Garage Door Spring 2-Pack (120 lb.)

  • ★Application: The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs.
  • ★Must have tool: Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.
  • ★Dimensions: Garage door torsion spring winding rod are 0.47inch in outside diameter and 17.7” long. They are designed to industry standard for residential garage door use, fit most residential winding cones.
  • ★Safety first: Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods.
  • ★If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours.
Check Stock

Garage Door Torsion Springs 1.75’’ Pair with Non-Slip Winding Bars Coated Torsion Springs with a Minimum of 10,000 Cycles 0.225X1.75 X25

  • REPLACE BROKEN SPRINGS：Use this pair of high quality garage door torsion springs to replace old broken garage door springs. It includes stationary....
  • HIGH QUALITY PRODUCT:Made of heat treated steel coils with aluminum cones to make sure they are extremely heavy duty.Surface coated black for....
  • SERVICE LIFE:For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/-....
  • EASY TO INSTALL:We also offer a pair of unique non-slip winding bars,they will help install new or replace old, rusty springs quickly (professional....
  • DIMENSION:.225” wire size x 1.75” inside dimension x 25” length.IMPORTANT:Please purchase after confirming that the outer diameter,wire diameter....
Check Stock

PANTHER MARINE O/B Motor Bracket SS 15HP MAX

  • Works with 4-stroke motors up to 15 HP or 2-stroke motors up to 20 HP with a maximum weight of 132 lbs..
  • Twist-knob safety locks provide increased torque rating while helping secure the bracket in place.
  • Built extra tough and extra wide for heavier 4-stroke engines.
  • Heavy-duty stainless steel torsion springs for easy lifting.
  • 4-position lock bar and 11" of travel allows for a better range of trim adjustments.
Check Stock

beamUP Workhorse - BU100 - Garage Door Opener, Heavy-Duty Chain Drive, Wall Mount and Remote Garage Opener Included - White

  • Type Heavy Duty 12 Gauge Galvanized Steel.
  • Adjustable To Utilize 1 3/4" And 2" Torsion Springs.
Check Stock

Garage Door Torsion Springs 2'' (Pair) with Non-Slip Winding Bars,High Quality Coated Torsion Springs with a Minimum of 10,000 Cycles (0.250X2''X30'')

  • REPLACE BROKEN SPRINGS：Use this pair of high quality garage door torsion springs to replace old broken garage door springs. It includes stationary and winding cones..
  • HIGH QUALITY PRODUCT:Made of heat treated steel coils with aluminum cones to make sure they are extremely heavy duty.Surface coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life..
  • SERVICE LIFE:For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight..
  • EASY TO INSTALL:We also offer a pair of winding bars,they will help install new or replace old, rusty springs quickly (professional installation recommended)..
  • DIMENSION:.250” wire size x 2” inside dimension x 30” length.IMPORTANT:Please purchase after confirming that the outer diameter,wire diameter and length are totally the same as the original product..
Check Stock

Garage Door Torsion Springs 1.75’’(Pair) with Non-Slip Winding Bars, Coated Torsion Springs with a Minimum of 10,000 Cycles (0.207X1.75''X26'')

  • REPLACE BROKEN SPRINGS：Use this pair of high quality garage door torsion springs to replace old broken garage door springs. It includes stationary and winding cones..
  • HIGH QUALITY PRODUCT:Made of heat treated steel coils with aluminum cones to make sure they are extremely heavy duty.Surface coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life..
  • SERVICE LIFE:For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight..
  • EASY TO INSTALL:We also offer a pair of unique non-slip winding bars,they will help install new or replace old, rusty springs quickly (professional installation recommended)..
  • DIMENSION:.207” wire size x 1.75” inside dimension x 26” length.IMPORTANT:Please purchase after confirming that the outer diameter,wire diameter and length are totally the same as the original product..
Check Stock

Garage Door Torsion Springs 1.75’’(Pair) with Non-Slip Winding Bars, Coated Torsion Springs with a Minimum of 10,000 Cycles (0.207X1.75''X24'')

  • REPLACE BROKEN SPRINGS：Use this pair of high quality garage door torsion springs to replace old broken garage door springs. It includes stationary and winding cones..
  • HIGH QUALITY PRODUCT:Made of heat treated steel coils with aluminum cones to make sure they are extremely heavy duty.Surface coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life..
  • SERVICE LIFE:For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight..
  • EASY TO INSTALL:We also offer a pair of unique non-slip winding bars,they will help install new or replace old, rusty springs quickly (professional installation recommended)..
  • DIMENSION:.207” wire size x 1.75” inside dimension x 24” length.IMPORTANT:Please purchase after confirming that the outer diameter,wire diameter and length are totally the same as the original product..
Check Stock

KUNTEC Torsion Bar Unloading Tool Heavy Duty Torsion Key Tool with C Frame Compatible for GMC Chevy Ford Dodge Car Truck Auto

  • FUNCTION: Torsion bar removal tool helps you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • EASY TO USE: Features larger 7/8” diameter anvil casting threads, this Torsion Bar Unloading Tool will make quick and easy work of your suspension job.
  • COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more.
  • QUALITY: This torsion bar tool is built with heavy-duty forged steel, made for use on trucks with heavy duty chassis and a larger torsion bar.
  • ATTENTION: This torsion bar unloading tool can only be used with hand wrench, do not use the impact driver. Grease the threads before using and get the front tires completely off the ground.
Check Stock

KATUR Black Leather Solo Seat 3Inch Spring Mounting Bracket Kit for Harley Harley Honda Yamaha Kawasaki Suzuki Sportster Bobber Chopper

  • The solo seat with spring and bracket mounting hardware fits for most of Harley Honda Yamaha Kawasaki Suzuki Sportster Bobber Chopper and Custom....
  • Spring Height: 3Inch (8mm). Seat Size: 11 3/4"x 9 1/2"(30cm x 24cm). Bracket Size: Overall Length : 7" (17.7cm).
  • New Barrel Type Springs With Excellent Shock Absorption. Triple Chrome Plated For Lasting Technique. Torsion Type design can shock absorption....
  • Heavy duty Steel made of the bracket mounting hardware. Black leather and the neoprene foam made of the Seat. Comes With Traditional Length, Great....
  • Package includes: 1X Motorcycle 3Inch Leather Solo Seat + 1 X Sliding T-Bar +1 X Swivel Bracket + 2 X Solo Seat Springs + Set of Mounting Kit..
Check Stock

BTSHUB Torsion Bar Unloading Tool Key Removal Compatible with GM Chevy Ford Dodge Drop Forged Heavy Duty

  • 【Torsion Key Tool】7/8 inch diameter threads.
  • Large C-frame opening: to accommodate beefier torsion bars.
  • 【Forged steel construction】Torsion bar unloading tool was made for use on trucks with heavy duty chassis and a larger torsion bar.
  • 【High Performance】 Designed to hold the torsion bar while you make adjustments to your vehicle.
  • 【Advantage】Torsion key unloading tool can be positioned on the frame and the torsion bar mount.
  • 【Applications】 Torsion Bar Unloading Tool Key is Compatible with GM.
Check Stock

HDBUBALUS Motorcycle Solo Seat Springs Mounting 2 Inch Spring Bracket Hardware Mount Kit Fit for Harley Sportster Softail XL 883 1200 Dyna Fatboy Bobber Black 1 Pair

  • Color:Black/Heavy-duty spring steel,solid, Metal plating for custom seat use.
  • Universal Fit for Harley Sportster,Yamaha,Kawasaki,Suzuki,Bobber,Chopper and Custom application.
  • Torsion-style springs designed for the optimum balance between spring suspension and support.
  • Easy to install, no cutting, welding, or fabrication is necessary.
Check Stock