Categories

Best Heavy Duty Transmission Shaft

Prokomon Dual Clutch Dry DPS6 Transmission Installer Remover Removal Tools Kit Compatible for Ford Volvo Focus Replacement FM Number: 307675

  • ◇ Material --- The material of the installation and removal tool of the dual clutch dry transmission is heavy duty steel, which is corrosion resistant and hard, so it has a long service life.
  • ◇ Fits --- Compatible for VOLVO, Compatible for FORD, Transmission DPS6, Replacement FM No. 307675. although not the original, it is a direct replacement and fits perfectly, we offer a warranty.
  • ◇ As Accurate As OEM --- All tools are engine tested and rigorously quality checked to ensure compatibility with the engine.even some our designs are better and last longer than those of the original manufacturers.
  • ◇ Function --- Special tool for mounting and dismounting, for removing dry transmissions and aligning dual clutches for oil seal replacement.
  • ◇ Instruction --- Install the special tool and compress the input shaft. After the threaded rod is in contact with the input shaft, turn it 20 turns..
Check Stock

4Pcs 1 10 RC Car Drive Shaft Front and Rear Universal Drive Shaft CVD Heavy Duty Compatible with 1/10 Traxxas Slash Rustler VXL 4X4 4WD Replacement Parts Blue

  • ▶Compatibility: 4Pcs front and rear drive shaft CVD heavy duty replacement parts, compatible with 1/10 scale Traxxas Slash Platinum/Ultimate/VXL 4x4....
  • ▶Update Material: CVD drive shaft made of high-quality metal materials: middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is....
  • ▶Performance: Ingenious design, professional manufacturing and fine workmanship, high reliability, ensuring smooth transmission..
  • ▶Separate use or use together: Good compatibility, suitable for most 1/10 traxxas rc car models, you can separate these front and rear drive shaft....
  • ▶Easy to install: these rc cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you....
Check Stock

Tamiya 58519 Toyota Bruiser 4X4 Pick Up - 2012 Edition Vehicle

  • 3-speed transmission with constant mesh gears.
  • Scale suspension with heavy duty metal leaf-springs and coil spring dampers.
  • Numerous scale body accessories including metal grab rails and side mirror supports, metal dual exhaust pipes and chrome plated parts (grille, fuel tanks, side steps, horns, visor, rims, bumpers, light mounts, wipers, mirrors and tire guards).
Check Stock

4Pcs 1:10 RC Car Drive Shaft Front and Rear Universal Axles Drive Shaft CVD Heavy Duty Compatible with 1/10 Traxxas Slash 4X4 Rustler VXL 4WD Replacement Parts (Gray)

  • ▶Compatibility: 4Pcs front and rear drive shaft CVD heavy duty replacement parts, compatible with 1/10 scale Traxxas Slash Platinum/Ultimate/VXL 4x4 4WD, Hoss 4X4 VXL, Rustler 4X4 VXL, Stampede 4X4 VXL etc..
  • ▶Update Material: CVD drive shaft made of high-quality metal materials: middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life..
  • ▶Performance: Ingenious design, professional manufacturing and fine workmanship, high reliability, ensuring smooth transmission..
  • ▶Separate use or use together: Good compatibility, suitable for most 1/10 traxxas rc car models, you can separate these front and rear drive shaft CVD or use them together according to your needs..
  • ▶Easy to install: these rc cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime..
Check Stock

OEMTOOLS 26842 1 Ton 2 Stage Telescoping Transmission Jack High Lift Transmission Jack Under Lift Transmission Jack Maximum Height of 76 Inches

  • Range of Height: These transmission jacks have a height range between 37.5 inches and 76 inches.
  • They feature a weight capacity of 2000 pounds at the second stage.
  • Hands Free: Raise and lower the two stage transmission jack with ease.
  • Pump and release the foot pedal at the bottom of the jack for hands free operation.
  • Adjustable Saddle: The 4 arms on the telescoping jack stand move both sideways and front to back to tighten or loosen grip.
  • Quickly adjust by spinning the wingnuts below the arms.
  • Keep Everything in Place: The positioning handle allows for accurate placement.
  • The smooth rolling rubber coated steel casters have locks to keep the heavy duty jack in place.
  • Protection from Leaks and Dirt Damage: The internal shaft retention system on this pedal jack reduces potential leak points for added durability and prevents dirt intrusion.
Check Stock

CNBTR Yellow 3MM Hole Dia Brass Gear Shaft + 31MM OD 60 T Brass Gear Wheel 0.5 Modulus Set

  • Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch. Size 2: Brass Gear Shaft: 0.5 Modulus, Outer Diameter: 9.7mm/0.38inch, Inner Diameter: 3mm/0.12inch..
  • The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The item contains one 0.5 modulus 3mm hole dia brass gear shaft and one 60T brass gear wheel..
  • Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
Check Stock

Double Clutch Dry DPS6 Transmission Installer Remover Tool Dual Clutch Disassembly Tool Kit Fit for Volvo Ford Focus Fiesta, Replace FM Number: 307675

  • FITMENT: Fit for Ford Mondeo Mk IV 2007-2013, S-Max 2006-2013, Galaxy 2006-2010, Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013.
  • SUPERIOR QUALITY: Constructed from heavy duty Steel and Aluminum. It features its durable construction, wide applicability and long service life.
  • REPLACEMENT: Replace FM number: 307675. Equivalent to OEM 205-1017. Designed to disassembly dry transmission and align the twin-clutch to change the oil seal
.
  • HOW TO USE: Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this tool kit, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

AMRA-37180 AFI 1000 Waterproof Wiper Motor w/ 2.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

AMRA-36180 * AFI 1000 Waterproof Wiper Motor w/ 1.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

CNBTR 0.5 Modulus Brass Reducer 20 T Wore Gear Wheel + 4mm Bore Gear Shaft

  • Set include one 0.5 modulus brass gear shaft and one 20 T brass gear wheel..
  • The transmission structure of shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

Doorking Key Newer

  • HEAVY DUTY Steel shaft elevator door drop leg key.
  • For elevator maintenance repair, rescue, maintenance.
Check Stock

Elevator Door Key Drop Key for Emergency Heavy Duty

  • HEAVY DUTY Steel shaft elevator door drop leg key.
  • For elevator maintenance repair, rescue, maintenance.
Check Stock

CNBTR 0.5 Modulus Light Weight Brass Reducer 20T Wore Gear Wheel + 3.175mm Bore Gear Shaft

  • Include one 0.5 modulus brass gear shaft and one 20 T brass gear wheel..
  • The transmission structure of shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock