Best Heavy Duty Welding Clamps

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

• 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
• 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
• 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
• 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
• 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.

Tysun 4 Pcs 6 Inch C Clamp Set, Up to 6 Inch Jaw Opening, 2-5/8 Inch Throat Depth Heavy Duty C-Clamps for Woodworking Welding and Building

• ★【Heavy Duty C Clamp Set】6 Inch c clamp made of high quality cast malleable iron, rust resistance and corrosion resistance, sturdy and durable.
• black coated surface construction protects your clamps from moisture, preventing corrosion from damaging clamps..
• ★【6 Inch C Clamp Size】Maximum jaw opening: 6 inches.
• ★【Maximum Pressure】Sliding T-handle to produced maximum torque with little effort thereby reducing hand fatigue. Chrome-plated screw thread turns easily and does not bind so your clamps will last as long as you need them..
• ★【Top Locking Force】Aside from being compact and made of high-quality steel for holding metal pieces together for welding, c clamps also allows for secure gripping to glue wood pieces together..
• ★【Wide Application】Versatile c clamp secures parts for assembly, fastening, gluing, and welding in woodworking, metalworking, and automotive applications..

WeldingCity 1-Lb ER309L Stainless Steel 309 TIG Welding Rod 1/8\x36\ | Pack of 1-Lb

• TIG Welding Gun Holder: This steel welding torch holder weighs 1.7lb with simple overall shape. It has silver granular matte texture.The base is electroplated and polished to reduce the surface roughness and look bright and smooth.
• Strong Magnetic Base: The powerful ferrite magnet that has heavy-duty holding stamina and the base are connected by a SC 4.8 screw and nut, which has good performance strength grade.
• Convenient Welding Helper: Torch holder will keep your TIG torch secured, the versatile design provides multiple option for torch placement in the holder.
• Free of Working Table: Powerful magnet clamps to workbench or the side of the welder, supporting the welding torch firmly, so it won't get bumped off the welding table. The wire/cable can also be nicely arranged.
• Fit Most TIG Gun: Our welding torch stand is suitable for most TIG torches.

ABN Arrow Welding Magnet – Metal Working Tools and Equipment, 45, 90, 135 Degree Angle Magnet, 4 Pack of 50 Lb Magnet

• METAL HOLDER FOR WELDING AND SOLDERING: The ABN Arrow Angle Welding Magnets easily angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
• These heavy duty powerful angle magnets stick solidly to any ferrous metal object and the bright red color will help you locate it easily.
• This 4 pack magnet set includes (4) 4 inch (10.2 cm) magnets that can hold up to 50 lbs of weight (22.7 kg).
• GET THE PERFECT ANGLE: Magnetic angle welding tools and accessories are designed to hold metal pieces together so you can safely work with both hands.
• Each welding angle magnet is designed with an arrow shape to allow you to work with different angles while welding, soldering, or installing metalwork.
• Each magnetic welding holder provides 45, 90, and 135-degree angles.
• HANDS FREE WELDING ACCESSORIES: Rather than having to use magnetic welding clamps that need to be readjusted and moved while welding, these magnetic welding holders hold your metal pieces together at a variety of angles allowing you to work through without having to pause to move them.
• The combined weight of a 4 pack makes it easy to work with heavy pieces of metal.
• VARIETY OF APPLICATIONS: Whether you are welding soldering, assembly, marking off, o....

16 Pack 3.5 Inch Spring Clamps-Black Spring Plastic Clamps for Backdrop Stand,Backdrop Clips Clamps,Heavy Duty for Crafts Woodworking Photography Studios Outdoor

• Package:16pcs 3.5 inch small spring clamps heavy duty.The dimensions of these backdrop clips clamps is 3.5"x2.9".Heavy duty spring clamps for versatile use in crafts, DIY projects, and photography.Whether you're a professional photographer or a hobbyist, these backdrop clamps are essential for achieving a seamless backdrop display..
• High Quality:The small heavy duty clamps is made of durable nylon plastic with two flexible pads.The rugged construction of these spring clips for backdrop stand can help clamp items firmly and lasting performance for longer life..
• Excellent Design:The pads in the heads of heavy duty clips are designed to be soft and flexible to protect finishes and provide maximum flexibility and tension.The flexible orange pads of the small clamps for crafts can rotate different degrees to adjust different objects,can be removed.The plastic clamps have high strength spring whose force is about 3.5lbf clamps heavy duty..
• Performance:The heavy duty clamps for backdrop stand have human engineering handle,anti-slip and reduce hand fatigue to better operation. The heavy duty clip is usually use for photography. And the backdrop clips clamps very suitable as wood clamps for gluing woodworking with the great bite forc....

HEIHAK 3 Packs 18 Inch Large C Clamp Locking Pliers with Swivel Pads, Heavy Duty Vice Grip Clamp Set, Adjustable Welding Clamps Tools for Woodworking Welding

• 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
• Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
• Straight Jaw Locking Pliers (7in. 10in.).
• 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
• 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
• Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
• There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

• 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
• 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
• 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
• 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

• Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
• Fits 3/16-inch to 26 gauge sheet metal materials.
• How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
• Tighten the winged nut to ensure a secure hold.
• Use all 16 clamps for larger projects, then joint weld between them.
• Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
• Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
• While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
• Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
• Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Arrow Welding Magnets Set Arc Tig Mig Welding Magnetic Arrow Holder Multi-angle Metal Working Tools and Equipment Welding Accessories For Soldering Welding Assembly Installation (4PCS-9LBS)

• 【High Gloss Enamel End Plates】Constructed of high quality stainless steel with a powder coated finish,these welders are anti-rust,corrosion-resistant and long lasting!High gloss enamel end plates are solidly riveted together for the strongest performance and won’t melt while welding!The red coating not only protect from rusting and from scratching the materials that you are working with,but also help you locate it easily,make your welding job more efficiently and precisely!.
• 【Powerful Welding Magnet】Each package comes with 4 pieces heavy duty powerful angle magnets:can hold and support any ferrous metal objects up to 9 lbs!They provide strong magnetic pull strength for extreme sturdiness that is needed for welding,soldering,can be stuck solidly to any metal object while leaving your hands free to work more efficiently!Perfect gift for square and round tube welders,iron workers,professional welders,metal fabricators,art welders!.
• 【Most Popular Uses of Angle Degree】Each magnetic welding holder is designed with an arrow shape which allows the magnet to align itself with the tubing in a self-centering fashion,and provides the most popular uses of angle degree:45,90,and 135-degree,allows you to work with different angles while welding,solderin....

MAXPOWER 15-pieces Locking Pliers with C-clamps Set, Long Nose Pliers, Pinch Off Pliers, Sheet Metal Clamp, U Shaped Pliers with Tool Bag for Storage

• 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
• Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
• Straight Jaw Locking Pliers (7in. 10in.).
• 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
• 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
• Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
• There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.

Clore Automotive Jump-N-Carry JNC770R 1700 Peak Amp Premium 12 Volt Jump Starter - Red

10 Pack Hold Down Toggle Clamps Woodworking,201B Clamps Hand Tool Toggle Clamp 220Lbs Holding Capacity,Antislip Quick Release Horizontal Toggle Clamp,Heavy Duty Toggle Clamp for Cam Over Clamp-SKYCY

• Quick Release Clamp:Cam clamp quick release toggle clamps for holdfast woodworking.Cam lever hold down clamp for cnc workholding clamps.Vertical clamp with non-slip oil and stain-resistant red vinyl solid handle is easy for woodworking clamps hand tool..
• Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
• Material: Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
• Size Spesifics : 5.90 * 3.74 * 1.41 inches. screw: M6 * 45..
• Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

• Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
• Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
• Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
• Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
• Length of large toggle clamp foot including rubber 1.88".
• Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..