Categories

Best Heavy Gauge Voice Coil Wire

American Bass Godfather 1222 12' Subwoofer 3000 Watts RMS 6000 Watts MAX

  • Blue Powder Finish Heavy Duty Diecast Aluminum Basket.
  • Prewired With Heavy 10 Gauge Wire With Tinned Ends.
Check Stock

Rockville DK512 PACKAGE Dual 12' 2800w K5 Car Subwoofer Enclosure+DB12 Amplifier

  • Loaded Sub Enclosure Features: Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure, Bonded stapled and braced, Computer designed vents, Angled at 15 % for perfect bass alignment.
  • 2″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet.
  • Amplifier Features: Rockville dB12 2000 Watt/500w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp, CEA Compliant Power Ratings (Rated at less than 1 % distortion).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.), – 2 Ohm: 1000 Watts x 1 Channel, – 4 Ohm: 600 Watts x 1 Channel.
  • Amp kit features: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire.
Check Stock

Memphis Audio MJME8S1 8' MOJO Car Subwoofer+Ported Sub Enclosure+Mono Amp+Wires

  • Package Includes: (1) Memphis Audio MJME8S1 8″ MOJO Car Subwoofer In Ported Sub Enclosure Box MJM822, (1) RockvilIe RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Amplifier Car Stereo Amp, (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA’s.
  • Features of MJME8S1: Piano black gloss finished front panel, Carpet wrapped enclosure, 4-layer wound copper voice coil, Fiberglass reinforced subwoofer cone, Stitched foam surround, Heat dissipating aluminum heat sink, DVVC Direct Vent Voice Coil Cooling, Ported Enclosure. Specifications of MJME8S1: Single 8″ 900w RMS/1800w PEAK @ 1Ω loaded enclosure, Width 20.7″, Height 12.7″, Top 13.7″, Bottom 16.2″.
  • Features of RXD-M3: RockvilIe RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc), 1 Ohm: 1000 Watts x 1 Channel .
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc), 1 Ohm: 2000 Wat....
Check Stock

Sundown Audio U-10 D2 10' 1500W RMS Dual 2-Ohm U-Series Subwoofer

  • Features: Black Aluminum 3” voice coil former for superior heat dissipation, High Temperature Round-Wire CCAW voice coil with high-temp black adhesive, Double stitched surround, Heavy duty cast basket, Spring loaded terminals accept up to 8 gauge, Stitched-on double-XL tinsel leads, Rear vented pole piece, Rear drilled gap-venting, Innovative high-velocity cast aluminum vented frame spacer ring, Magnet ID shorting ring, Top-Plate Cooling Channels, Cast Aluminum surround bolt-on rings, Optimized.
  • Specifications: 1500 Watts RMS | Linear X-Max by 70% | Magnet Diameter: 8.66 in. | DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 48.5 Hz | Equivalent Volume (Vas): 8.3 L | Electrical Q Factor (Qes): 0.35 | Mechanical Q Factor (Qms): 3.20 | Total Q Factor (Qts): 0.32 | Force Factor (BL): 26.8 NA | Moving Mass (incl. Air Load) (Mms): 216.3 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 86.2 dB 1w / 1m.
  • Box Recommendations: Sealed Enclosure Suggestion: 0.5 cu. ft. | Ported Enclosure Suggestion: 1.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.007 in |Outside Diameter: 10.94 in | Cutout: 9.17 in | Recommended Tuning: 32 Hz | Recommended Port Area: 16 sq. in..
Check Stock

2 BOSS CX122 Audio Chaos 12-Inch 1400 Watt Car Subwoofers and Q Power 12-Inch Sub Box and 1600 Watt Amplifier and Amplifier Installation Kit

  • SUBWOOFER BOX: Dual heavy duty vented subwoofer enclosure designed and built for the deepest bass.
  • BOX DIMENSIONS: 36" (W) x 13 1/4" (H) x 16 1/4" (D).
  • AMPLIFER: RMS Power: 260 Watt x 2 Channel @ 4 Ohm.
  • 1600 Watt x 1 Channel @ Max Bridged 4 Ohm.
  • WIRING KIT: 20 ft. 8 Gauge Red power cable.
Check Stock

Rockville DWB80W Dual 8\ White 800 Watt Marine Wakeboard Tower Speaker System

  • Package Includes: (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (2) Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the....
Check Stock

(4) Rockville RMSTS80S 8\ 2000 Watt Waterproof Marine Boat Speakers 2-Way Silver

  • Package Includes: (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (2) Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the....
Check Stock

JBL Professional JRX215 Portable 2-way Sound Reinforcement Loudspeaker System 15-Inch

  • Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure uses advanced adhesives and mechanical fastener technology for extreme durability and improved....
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • JBL 2414H-C 1" polymer diaphragm compression driver improves high frequency performance as well as system reliability.
  • JBL 15" low frequency driver with a 2.5"-diameter edge wound ribbon voice coil for greater efficiency and power handling.
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • ...g system allows air exchange over the voice coil through the spider.
  • External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed into a compact crossover housing that can be easily hidden in the installation. Frame: Heavy gauge progressive-die stamped steel frames for ultimate rigidity. Motor: Ferrite magnet motor creates a strong magnetic field while remaining small enough to fit nearly every application.
  • Connectors: Use spade connectors or solder direct for the best connection. Tweeters: Large component tweeters produce clear highs while handling plenty of power without sound harsh. Mounting Diameter/Cut Out: 5.59" inches. Outside Diameter: 7.01" inches. Mounting Depth/Chassis Depth: 2.12" inches.
Check Stock

2 BOSS AUDIO CHAOS CX122 12-Inch 1400 Watt Car Power Subwoofer Sub and AR1500M Armor Series 1500 Watt Mono Amplifier and Amplifier Installation Kit

  • SUBWOOFERS: 700 Watt RMS (1400 Watt PAIR).
  • AMPLIFIER: RMS Power: 700 Watt x 1 Channel @ 4 Ohm.
  • Max Power: 1500 Watt x 1 Channel @ 2 Ohm.
  • AMPLIFER DIMENSIONS: 6.5" W x 2.625" H x 11 11/32"L.
  • WIRING KIT: 20 foot 8 gauge red power cable.
Check Stock

Polk Audio AA3154-A MM1540 15-Inch Subwoofer

  • New Polymer Woofer Cones and Butyl Rubber Surrounds will not break down over time and will survive the rigors of harsh automotive environments.
  • High Temperature Copper Voice Coil (51 millimeter) and Polyamide Former withstands the most rigorous use while maintaining extremely low distortion for bass punch and output.
  • Available in Single and Dual Voice Coil Configurations allowing flexible wiring options.
  • Nickel Plated Heavy Duty Input Terminals accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.
  • Available Matching Grilles complement the wheel spoke design.
Check Stock

KICKER 43DC122 Comp Dual 12" Subwoofers In Vented Sub Box Enclosure, 2-Ohm Bundle with Rockville dB11 1400W Peak Mono 2-Ohm Car Amp and Bass Remote and RWK81 8 Gauge Amp Installation Kit

  • ...ion, Double stitched surround for enhanced durability.
  • Tinsel leads woven into the spider with Kicker's Spiralead technology, Single high-temperature 4 Ohm voice coil, 45 oz. Magnet Structure, Frequency Response: 30 - 500 Hz, Sensitivity: 95 dB, 3/4" MDF Construction, Heavy duty black carpeting, Embroidered Kicker logo, Monogrammed carbon fiber front.
  • Features of dB11: Optical Coupler Class "D" Technology, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry, Low Pass Filter: 50Hz - 250Hz, Subsonic Filter: 15Hz - 55Hz, Phase Control, Full IC-Controlled Protection Circuitry, Fully Adjustable 12dB Bass Equalizer, Mute and Delay Soft Start System, Status Mode LED Indicator, Minimum THD at Rated Power: 90dB, Under Voltage Protection at 10V, Over Voltage Protection at 16V, Frequency Response: 15Hz - 250 Hz.
  • Features of RWK81: (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3 8 Gauge SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse,....
Check Stock

(2) Rockville RVL69W 6x9' 600w Cast Aluminum Car Subwoofers Sub Woofers

  • ...tom Rubber Boot Magnet Cover, Custom Rockville Mounting Gasket makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap.
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated, 3 layer spider made with thick gauge material that is resistant to tearing even at extreme SPL levels, Easy to install recone kits are available, Cutout Diameter:11.22 inches, Mounting Depth:7.48 inches, Frequency Response: 31.634 Hz -500Hz, 15mm T-Yoke + 12mm Washer, Sensitivity: 85dB, Sealed Enclosure Volume:1.24-2.12 Cubic Feet.
  • Vented/Ported Enclosure Volume: 1.94-2.83 Cubic Feet, 1-Way XMAX: 28 MM, 2-Way XMAX:56 MM, Weight: 41.08 lbs., Shipping Weight: 43.28 lbs., Shipping Box Dimensions: 15.75” x 15.75” x 13.58” Inches.
Check Stock