Categories

Best Heavy Wall Tubing

GarageTek Adjustable Ceiling Mounted Storage Racks 4 x 4 - Maximizes Garage Organization and Storage with Overhead Garage Storage up to 54 cu ft

  • THE PERFECT SOLUTION: Safely store tires above ground and free up precious floor space..
  • WORKS ANYWHERe: Adjustable, heavy duty 12-gauge telescopic steel tubing extend up to 56 inches, making it suitable for any garage or work shop..
  • HEAVY DUTY: The SafeRacks Tire Rack holds up to 400 pounds, easily storing 4 tires.
  • SUPERIOR DESIGN: Our tubing is 15% thicker and 15% larger in diameter than the competition! 11-gauge steel wall mounts are installed with grade 8 heat-treated, case hardened lag bolts..
  • AESTHETICS: Textured Black Powder Coated Brackets with Textured Zinc Tubing and Black Oxide 3/8" Bolts.
Check Stock

OUUO Heavy Duty Wall Mounted Pull Up Bar for Doorway - Fully Welded Construction Strength Training Pull-Up Bars 1.25-Inch Durable Steel Tubing - Over Door Pull Up Bar with 4.8” Wall to Bar Spacing

  • MAX LOAD-BEARING 400LBS - The OUUO wall mount pull up bar is made of heavy gauge steel for more durability. This pullup bar for doorway has a maximum load-bearing capacity of 400lbs..
  • 4.8” WALL CLEARANCE - The exercise bar’s mounting holes are set at a 32" spacing for 2 standard wall studs. It fits doorways from 24-30” wide. Wall clearance is 4.8". This pull-up bar is suitable for exercise space under the wall - doorways, beams, etc..
  • DURABLE BLACK POWDER COATING - Our doorway pull up bar is coated with a durable black powder to prevent rust and corrosion. The fitness bar’s surface has a non-slip matte textured effect..
  • 1.25” HEAVY-DUTY STEEL TUBING - Upon installation, the chin up bar will not impact opening or closing of the door. Our doorframe pullup bar is constructed with 1.25” heavy-duty steel tubing for max stability and durability..
  • INSTRUCTIONS & MOUNTING HARDWARE INCLUDED - This door exercise equipment comes with full mounting instructions and all mounting hardware so that you can start exercising as soon as it’s delivered to your home..
Check Stock

8 Pack 2 Inch Square Plastic Plugs,Hydanle Insert End Caps for Square Tubing Post

  • ✅These heavy duty tubing post end caps Fits 2" OD square tubing (2"x2") with INSIDE hole diameters (ID) from1.85" to 1.9" and wall thickness of .02"....
  • ✅Flexible ridges or straps snugly hold these square plastic tubing plugs in place.
  • ✅The square plugs are made of black LD polyethylene, these high-grade plastics black ribbed plugs work great for preventing scuffs on wood floor or....
  • ✅ The caps for square tubing also give a finished sleek look for many small projects: Suitable for trailer frame ends, bike rack fittings, wrought....
  • ✅ Easy to install 2"x2" plugs are also designed to hold up against impact abuse, and harsh weather conditions.
Check Stock

Husky Quick Adjustable Tubing Cutter

  • Clean, square cuts are easily made on copper, brass, and aluminum tubing and thin-wall conduit.
  • Quick-adjust feature provides the user with fast cutting speeds.
Check Stock

Husky Quick Release 2-1/8 in. Tube Cutter

  • Clean, square cuts are easily made on copper, brass, and aluminum tubing and thin-wall conduit.
  • Quick-adjust feature provides the user with fast cutting speeds.
Check Stock

PULL UP BAR ATTACHMENT FOR POWER RACKS & OPEN RACKS

  • 48" width bar 1 1/4" dia heavy wall Knurled tube.
  • Horizontal supports are 2" x 2" heavy wall square tubing for maximum strength..
  • 2" x 5" x 1/4" heavy flange. Properly mounted will support 1200 lbs. Use for wide grip or close grip pull ups. Ends and center of bar knurled for better gripping. Two transverse handles for pull ups. Professional quality. 15 degree down angle at ends. Can be mounted on any TDS Open or Power Racks. Can be mounted reverse as shown in the picture for reverse grip pull ups. Same day shipping if order is placed in morning. Made out of heavy 14 gauge material not light weight 16 gauge material..
  • 2" Sq. Tube Upper Cross Beam with 3/8" x 3" four bolts furnished for secure mounting.
Check Stock

KWODE Commercial Sink Faucet with Pre-Rinse Sprayer 8 Inch Center Wall Mount Kitchen Faucet 25” Height Compartment Sink Faucet with 12” Swivel Spout for Restaurant Industrial, Brass Chrome Finish

  • ... install it, please make sure all the gasket inside your female thread. When you connect the faucet parts, do not use water tape to connect it.).
  • ❤Reliable Heavy Duty Restaurant Faucet: lead free brass with superior rust-resistant chrome polished finish.The outlet pipe can rotate at 360 degrees.
  • The flexible metal tubing can be bend back and forth over 100000 cycles. We add a stainless steel sheath on the interface between the tubing and faucet to increase the service life of the tubing. Any issue, please contact us from your order, we promise we will reply and fix your concerns in 24 hours..
Check Stock

Husky 2 in.PVC, CPVC, PP, PEX and PE piping Ratcheting PVC Cutter with quick change blade mechanism

  • Clean, square cuts are easily made on copper, brass, and aluminum tubing and thin-wall conduit.
  • Quick-adjust feature provides the user with fast cutting speeds.
Check Stock

Westin 40-2075 Black Sportsman Grille Guard

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ram 1500 and Dodge Ram 1500.
Check Stock

ELECFUN 2in Heat Shrink Tubing 3 1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube Fully Insulation 4 Feet Black Tubing and 4 Feet Red Tubing

  • Package: 4 ft long Black 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 4 ft long Red 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~....
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting....
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED....
Check Stock

Premier RC 10 ft. Arch FPV Racing Air Gate - Yellow/Black

  • Made with heavy-duty fade and prop resistant Suntex fabric..
  • Framed with telescoping fiberglass poles or with durable heavy wall fiberglass tubing..
  • Joined with high quality metal ferrules..
Check Stock

ELECFUN 3/8in Heat Shrink Tubing 3:1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube, Fully Insulation (4 Feet Black Tubing, and 4 Feet Red Tubing)

  • Package: 5pcs 0.8ft Black 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 5pcs 0.8ft Red 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock