Categories

Best Heavy duty Fastener Bolt

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x1-1/2" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 1-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

Slide-Co 241947 Bed Frame Rail Clamp with 1" Frame, Small, Zinc

  • Constructed of heavy gauge steel and solid steel bolt fastener.
  • Clamp and bolt fastener comes finished in a corrosion resistant, zinc plated finish.
  • Used with 1-1/4 inch x 1-1/4 inch wide bed frame L-angle material.
  • Hand tightening should be all that is necessary for setting bed frame width, but pliers can be used for tightening with slightly increased torque if frame halves keep spreading easily.
Check Stock

United Pacific Universal Chrome Bullet License Plate Fastener Screw Caps for Standard License Plates, 1-inch Stud w/Metric M6 x 1.0 Threads - 4 Pack, Silver, (10889)

  • WHAT’S IN THE PACKAGE: The United Pacific Chrome Bullet License Plate Fastener set includes 4 bullet fasteners and matching thread size nut, split lock washers, and flat washers. This is for a set of 4 of our Bullet License Plate Fastener screws. (NOTE: These are universal and can fit motorcycles but modifications to the bolt (cutting) may be necessary)..
  • SPECIFICATIONS: Our United Pacific Chrome Bullet License Plate Fastener screw pack consist of 1 set (4 units) of license plate fastener with your order. Each of the chrome bullet fastener screws measures at 2 inches (overall length) with a 1-inch-long stud measuring Metric M6 x 1.0 treads. The bullet section measures at 3/4” x .3/4”..
  • EXTRA INFORMATION: The United Pacific Chrome Bullet License Plate Fastener installation is quite simple. It should be able to fit all standard US license plate screw holes on your vehicle. The chrome fastener screws have gone through our triple chrome plating process giving you that beautiful shine..
  • MAKE IT YOUR OWN: We at United Pacific offer a variety of aftermarket parts and accessories to make your vehicle your own! We have hands on classic cars, RVs, Semi, boating, motorcycles and even with lighting, mirrors and other accessories for your vehicles. We have a t....
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

AMERICAN MUTT TOOLS Mini Bolt Cutter 8 Inch | High Strength Small Bolt Cutter | Heavy Duty Bolt Cutter for Cutting Fencing, Barbed Wire, Nails and Screw Cutter | Compact Bolt Cutter, Wire Fence Cutter

  • Like a Hot Knife Through Butter: The 8 inch bolt cutters heavy duty compound leverage design helps you effortlessly cut through bolts, chain, nails, rod and wire up to 3/16" in diameter..
  • Ergonomic: Give your hands the break they deserve. Our barb wire cutters ergonomic handle design helps eliminate fatigue from extended use. The fishing bolt cutters set also easily fits into most tool pouches..
  • Built To Last: The metric bolt cutters small heavy duty cutting heads undergo a specialty heat treatment process which allows these handheld bolt cutters to cut just as cleanly the 100th time as they did the 1st time..
  • Heavy Duty: Made from precision forged alloy steel, this mini bolt cutters heavy duty works just as hard as you do. Our barbed wire cutters use compound leverage to allow you to slice through steel wire with just one hand..
  • Limited Lifetime Manufacturer Warranty: This fence wire cutters heavy duty is backed by the American Mutt Tools Limited Lifetime Warranty for your complete peace of mind. Our folding bolt cutters are professionally made in China..
Check Stock

ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set

  • EFFORTLESS SCREW & BOLT EXTRACTION: Use the ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming.
  • Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm).
  • EASY TO USE: If broken bolt is either above or below the surface, use drill guides.
  • Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole.
  • The drive nuts fit tightly over extractor to provide an easy and non-damaging way to turn extractor.
  • Clamp in a vise grip and twist broken bolt off extractor once removed.
  • BUILT TO LAST: For ultimate strength and highest torque without expansion, the drill bits constructed from #4241 high-speed steel (HSS) with polished finish, extractor pins constructed from #6150 chrome-vanadium (CR-V) steel with polished finish, drilling guides constructed from #45 steel with black oxide finish, extractor nuts constructed from alloy steel with sandblasted finish.
  • EASY STORAGE: Heavy-duty 8.6” x 1.6” x 5.6” inch (21.8cm x 4.1cm x 14.2cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • Storage case includes sizing labels for each co....
Check Stock

ABN 1/2in Drive Lug Nut Rounded Bolt Remover Socket Set 6pc Stripped Bolt Extractor Kit 17 to 26mm with Center Punch Bar

  • [Remove Damaged Fasteners]: The ABN Bolt Extractor Tool Set 6pc with Center Punch removes stripped, rounded off, or broken lug nuts, bolts, screws,....
  • [Easily Remove from Extractor]: Once fastener is removed from application, the included 3 x 0.4-inch (7.6 x 1.1cm) center punch bar allows for simple....
  • [Fits Your Application]: Metric 17, 19, 21, 22, 26mm permanently laser-etched sizes.
  • 1/2-inch drive and 2-inch (5.1cm) overall lengths of lug nut....
  • [Easy Storage]: Heavy-duty 8.25 x 5.8 x 1.75-inch (21 x 14.7 x 4.4cm) plastic blow-molded carrying case with sliding latch to house bolt extractor....
  • [Quality You Can Trust]: Constructed from chromium-molybdenum (CR-MO) steel.
  • Each instant nut removal tool kit socket comes pre-oiled for maximum....
Check Stock

18\ Heavy Duty Cane Bolt Drop Rod Gate Hardware for Wood Fence Gate Ground Latch for Wooden Gates Holding Doors, Hard Steel, Black

  • 【STURDY AND DURABLE】Heavy Duty Cane Bolt Drop Rod made of thicken gauge black steel and won’t break or buckle. With black powder coated, anti-rust, and with excellent corrosion resistance. This wood fence gate rod could last for long life outdoors, withstand bad weather. Widely used on wooden fence gates, metal gates, iron gates, vinyl gate or double gates, doors, etc..
  • 【HEAVY DUTY】Designed for using on heavy duty gates, fences, and doors. The gate drop rod is thicker than similar cane bolts on the market. 18"length rod is able to stay deeper and more secure ground penetration to hold a heavy gate firmly in place. Suitable for anti-theft and reinforcement of the gate..
  • 【KEEP GATES SECURE】 Drop pin keep your gates stable. Our canes bolts are designed to secure your single or double doors, gates, and fences in the open or closed position. Protect your gate from moving around in the wind and the hazards that movement can present..
  • 【CONVENIENT USE】Just turn the rod manually to slide down through the holes of the brackets and put it into the ground, to keep your gate or fence in a stable position. When not in use, place bolt on the bolt retainer..
  • 【EASY TO INSTALL】This heavy duty gate drop Rod includes one sugarcane bolt, three fixe....
Check Stock

Arrow Fastener 60830 1/2' Wide Crown Heavy Duty Staples

  • The Arrow Fastener 3/8" T50 506SS1 stainless steel staples:3/8 in. crown size, 3/8 in. leg length, includes 1000 staples..
  • The Arrow Fastener 1/2" T50 508SS1 stainless steel staples:1/2 in. leg length, includes 1000 staples..
  • Made of heavy duty, corrosion resistant steel,these staples will last you a long time and will hold you a fabric, wiring and anything else secure..
  • Can be used for light and heavy duty home projucts such as installing window screening, upholstering furniture, attaching insulation and pinning down wire..
Check Stock

SMOOTHERPRO Bolt Action Pen Decent Stainless Steel Compatible with Pilot G2 Refill Durable Stainless Steel Clip for EDC Pocket Design (SSG050)

  • ...ble with Pilot G2 Gel Refill, which provide you an excellent writing experience with gel refill and also, the refill is easy to get online and supermarket. The pre-installed refill in this Pen is G2 Gel Fine Point Refill, line size 0.5mm..
  • Finely CNC machined body and threads for decades of use, a decent inexpensive heavy duty metal pen with Stainless Steel Clip for your own use or give to friends or family as pen gift. Well buffed to avoid potential cut during your EDC use with unsurpassed quality control..
  • Constructed with heavy weight full metal stainless steel 316 grade solid bar.
  • unbreakable body with balanced weight for writing and holding. Extra weight is ideal to be used in tremor arthritic hands, excellent writing aid for elderly, carpal tunnel, parkinson’s and other people who need a heavy duty pen. Elegant and great looking design, suitable for both men and women..
  • Ideal metal gift pens for mom, dad, brother, sister, son, daughter, boss, schoolmate, girlfriend, boyfriend, worker, broker, teacher, clerk, lawyer, teacher, brainworker and whoever else you care about because this is an everyday carry pen with beautiful finish and heavy duty. It comes with a high quality gift box..
Check Stock

Smead Pressboard Classification File Folder with SafeSHIELD Fasteners, 2 Dividers, 2

  • Patented SafeSHIELD coated technology reduces paper tears, finger cuts and excessive fastener crinkling..
  • Heavy duty pressboard stock and Tyvek gusset. Expands up to 2 inches for greater storage capacity..
  • Fasteners on front and back panels and dividers create 6 separate filing surfaces..
  • Includes 10 legal size classification folders (15-1/4"W x 9-1/2"H). Each folder has a 2/5 cut tab in center right position, SafeSHIELD fasteners and 2 dividers..
  • The ultimate classification folder when security, safety and durability are important..
  • Proudly made in the USA. Contains 60% recycled content, 30% post-consumer material and is SFI Sourcing Certified.DescriptionCreate a file within a file. Dividers with tabs and fasteners on both sides let you store information under several subdivisions, and fasteners on the front and back panels add additional filing surfaces. Protect your documents and fingers with Smead's patented SafeSHIELD Coated Fastener Technology the ultimate solution to fastener issues, including paper tears, finger cuts and excessive fastener crinkling. Heavy duty pressboard stock and Tyvek gusset. Expands up to 2 inches for greater storage capacity. Fasteners on front and back panels and dividers create 6 separate filing surfaces. Includes 10 legal ....
Check Stock