Categories

Best Heavy duty Metal Oil Filter Cutter

Eacker Cable Cutter Wire Rope Heavy Duty Stainless Steel Aircraft Up to 3/16 for Deck Railing Strong Thick Seal Metal Fence Bicycle Brake Cutter with Wire Rope Aluminum Sleeve

  • 【High Quality Cable Cutter】This cable cutter is made of 50CR alloy structural steel, the hardness reaches HRC-58-63. Suitable for various mechanical maintenance. Cutting range is up to 3/16 (5mm) stainless steel wire rope, up to 3/16 (5mm) hard steel wire, up to 3/16 (5mm) aviation cable..
  • 【Cutting Sharp But Safe】Serrated cutting edge, the blade width is 6mm, and the depth is 11mm. The cutting is fast and smooth, and it can cut single-strand or multi-strand iron wire, spring steel wire, etc. The cross-section of the cut steel wire is flat and will not appear loose. The wire rope cutter is equipped with a safety lock to prevent accidental opening and prevent injury..
  • 【Ergonomic】The handle is dipped in plastic, which feels comfortable and non-slip and oil-resistant. The handle line is suitable for one-handed operation, which not only saves effort, but also has higher shear strength. Telescopic spring design, easy to carry, suitable for beginners..
  • 【Wide Applications】The hard wire cutter is widely used in industrial and household applications, such as cable railings, fencing, bicycle brakes and other DIY projects. Heavy duty cord cutters are also ideal park tool cord cutters, bicycle cord cutters, bicycle cord cutters, bx cord cutters, truc....
Check Stock

Genius Tools Heavy Duty Oli Filter Pliers, 60?90mm - AT-OF10

  • HEAVY DUTY OIL FILTER PLIERS - Genius Tools Heavy Duty Oil Filter Pliers 2.25" - 3.5" Range AT-OF10.
  • THREE POSITION - Three position slip joint design for quick and easy adjustments.
  • ONMIDIRECTION - Right-angle teeth designed to grab oil filters in either direction.
  • ERGONOMIC NON-SLIP RUBBER GRIP - Durable ergonomic grip for comfortable daily professional use.
  • EXTENDED HANDLES - Giving you the freedom to reach tight corners and tackle any job.
  • ANSI STANDARDS - Meets or exceeds the standards established by the American National Standards Institute.
  • PROFESSIONAL GRADE - Genius Tools are designed and made for use by professional technicians and built to perform over a lifetime of heavy use. Trust Genius for a quality tool at a value cost to you..
  • CORROSION RESISTANT - Coating to prevent corrosion for a lifetime of professional use.
  • EASY ANGLE - Making oil filter removal a quick and easy job.
Check Stock

Keadic Glass Cutting Tool Set Contains Glass Running Pliers, 2mm-20mm Oil Feed Carbide Tip with 3 Bonus Blades, Calibrated Portable Circular Glass Cutter for Mirrors Windows Mosaic Stained Glass

  • ...tting tool contains 1 pcs heavy duty glass breaking pliers, 1 pcs pen style oil feed carbide tip with 3 pcs replaceable blades (2-6mm,6-12mm, 12-20mm), 1 pcs screwdriver for replacing the blades, 1 pcs clear plastic oil dripper for add oil into the glass cutting tips lubricating the wheel, 1 pcs circular glass cutter and 2 pcs pens, totally 8pcs. A professional glass kit covers all tools needed to cut glass..
  • 【High-value Pencil Style Oil Feed Glass Cutting Set 】 The pen style oil feed cutter tip is designed with a black non slip embossed handle, the ball shape end can be taken off and add oil into the cutter from the entrance. Ultra-strong diamond carbide blade with solid hardness and sharp cutting to guarantee smooth operation. Suitable for 2-6/6-12/12-20mm thick glass cutting..
  • 【Premium Glass Running Pliers with Rubber Tips】 Made of heavy duty carbon steel for rust-resistance, PVC rubber handle is ergonomic and soft, which allows you to grip comfortably. Adjustable set screw design for controlling the amount of pressure applied, easy to adjust for different thicknesses of glass. Equipped with silicone cover, it can quickly break glass/tiles without causing scratches on the glass surface..
  • 【Precision Circular Glass Cutter 】 Made of pre....
Check Stock

PneumaticPlus SAU2000M-N02DG-MEP Mini Three-Unit Combo Compressed Air Filter Regulator Lubricator FRL, Air Preparation Unit 1/4\ NPT - Metal Bowl, Auto Drain, Gauge

  • HEAVY DUTY 1/2" COMBINATION FILTER-REGULATOR-LUBRICATOR. PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER..
  • COMES EQUIPPED WITH WALL MOUNTING BRACKET AND BACK MOUNT PRESSURE GAUGE..
  • FILTER: 250 PSI MAX - 5 MICRON FILTER - 5oz METAL BOWL CAPACITY AND VISUAL SIGHT GLASS..
  • REGULATOR: 7 - 225 ADJUSTMENT PRESSURE - 250 PSI MAX..
  • LUBRICATOR:OIL FILL ADJUSTMENT TO REGULATE OIL FLOW - 5.1oz OIL CAPASITY AND VISIBLE SIGHT GLASS..
Check Stock

Klein Tools 1019 Klein Kurve Wire Stripper / Crimper / Cutter for B and IDC Connectors, Terminals, More

  • Heavy Duty Wire Stripper Cutter Crimper Multi Tool 8 20 AWG.
Check Stock

Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe

  • 【Precision Cutting】 - Sharp SKD cutting blade wheel and 6 Pcs high density ball bearing rollers clamps the pipe firmly during cutting, helping pipe cutter perform cutting for 5 to 50mm pipe with stability and precision, especially for metal & steel material, which frees you from the trouble of unfit pipe and uneven cutting surface because of instability.
  • 【Heavy Duty】 - Made of high density but lightweight aluminum alloy, copper pipe cutter is durable and compact. It won’t be broken after many times of cutting and it will last a long time. And aluminum alloy body makes metal pipe cutter more suitable for high density metal material cutting.
  • 【Clear Cutting】 - Tube cutter with 6pcs ball bearing rollers offers you a smooth cutting, improving cutting efficiency. Some small burrs are inevitable. So our steel pipe cutter comes with a deburring tool, which is made of sturdy plastic construction and high-speed steel blades. It can be used on both sides to perform inner diameter reaming and outer diameter grinding on the inner and outer sides of the incision to prevent scratches.
  • 【Ease Of Use】 - The bottom of the steel pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the tool, and provides a strong clamping f....
Check Stock

stedi Cable Cutter, High-Leverage Wire Cutter Pliers, Metal Wire Cutting Tools for Aluminum, Copper, Communications Cable, AWG 3, 2, 2/0…

  • PROFESSIONAL 6 INCH WIRE CUTTER – Stedi professional carbon steel cable cutter with shear jaws is specifically designed for cutting AWG 2 and 2/0 copper and soft aluminum wire and cables at ease. The cable-gripping shear type jaws is sharp and sturdy for heavy-duty cutting work and performs well even in confined spaces..
  • ANTI-RUST & HIGH-STRENGTH CARBON STEEL – This heavy-duty cable cutters for up to 2/0 cables are made of high-strength carbon steel and the finished with anti-rust oil to achieve excellent rust and corrosion resistance, and a super long service life. It is perfect for cutting thick cables for its blades are sturdy and will not easily deform..
  • HIGH LEVERAGE FOR LABOR SAVING – The special high-leverage design gives this metal wire cutter pliers extra-long handles, this labor saving design helps save up to 30% force needed to cut cables and wires as compared to other ordinary cutters on the market, making your work much easier, and prevents hand and wrist fatigue..
  • PVC DIPPED ANTI-SLIP HANDLES – To ensure a better and more stable grip, the handles of this high-leverage wire cutter are covered with flexible and anti-slip PVC material, which adds friction and offers a more comfortable grip. PLEASE NOTE: PVC dipped handles are not insu....
Check Stock

Motivx Tools Oil Filter Removal Tool - Adjustable Wrench for 2.5" - 3.25" Small Diameter Spin-On Oil Filters

  • SECURELY GRIP AND REMOVE A WIDE RANGE OF FILTERS – The Motivx Tools MX2330 oil filter wrench removes small 2.5” - 3.25” diameter traditional spin-on or canister style oil filters. The wrench features a tooth style design for a secure grip that won't slip and lets you easily and safely remove the filter..
  • HEAVY DUTY CONSTRUCTION – This removal tool features a .050” captured spring as opposed to the flimsy .020” spring found on other wrenches. The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate. Low profile design gives you access to tight access spots..
  • EASY TO USE – Simply slide the jaws of the wrench over the filter while slightly rotating to the right (tighten). Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise (loosen). The jaws will grip the stuck filter tightly and begin loosening it..
  • PROFESSIONAL QUALITY - Motivx Tools is a specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are b....
Check Stock

Zoe s Kitchen Good Grip Egg Slicer for Hard Boiled Eggs Heavy Duty Professional Large Aluminum Egg Slicer with Stainless Steel Wires Kitchen Aid Egg Strawberry Slicer Hard Boiled Egg Cutter

  • Aluminum Egg Slicer: This boiled egg slicer tool has high standard aluminum metal body, resulting in a rust proof and more durable egg slicer. The boiled egg cutter contains sharp and high quality stainless steel wires which helps in smooth and neat cutting of boiled eggs. The user friendly and good grip handle of kitchen egg cutter makes it easy and comfortable in daily usage..
  • Multipurpose Egg Slicer: The Multi-purpose egg cutter has a perfect egg slot, by which the egg will not slide away. Stainless steel wires are mechanically pressed resulting ​in a professional egg cutter and perfect for making thin, uniform slices of hard-boiled eggs . This heavy duty egg slicer can also be used as an egg salad cutter, large mushroom slicer, strawberry cutter, cheese slicer, kiwi cutter, deviled Egg Cutter, Spam Cutter, Olive Slicer and cherry tomato slicer..
  • Convenient to use or store: The stainless steel wire egg slicer has a simple operation which can bring convenience to your life. Just put the food into the handheld egg slicer and push it down, you will get neat slices every time. Due to its smart shape, the metal egg slicer can be stored in a cabinet or drawer without taking up too much space..
  • Dishwasher safe egg slicer: This is an easy clean eco egg sli....
Check Stock

stedi Professional Cable Cutter, 6-Inch High-Leverage Wire Cutter Pliers, Metal Wire Cutting Tools for Aluminum, Copper, Communications Cable, AWG 3, 2, 2/0

  • PROFESSIONAL 6 INCH WIRE CUTTER – Stedi professional carbon steel cable cutter with shear jaws is specifically designed for cutting AWG 2 and 2/0 copper and soft aluminum wire and cables at ease. The cable-gripping shear type jaws is sharp and sturdy for heavy-duty cutting work and performs well even in confined spaces..
  • ANTI-RUST & HIGH-STRENGTH CARBON STEEL – This heavy-duty cable cutters for up to 2/0 cables are made of high-strength carbon steel and the finished with anti-rust oil to achieve excellent rust and corrosion resistance, and a super long service life. It is perfect for cutting thick cables for its blades are sturdy and will not easily deform..
  • HIGH LEVERAGE FOR LABOR SAVING – The special high-leverage design gives this metal wire cutter pliers extra-long handles, this labor saving design helps save up to 30% force needed to cut cables and wires as compared to other ordinary cutters on the market, making your work much easier, and prevents hand and wrist fatigue..
  • PVC DIPPED ANTI-SLIP HANDLES – To ensure a better and more stable grip, the handles of this high-leverage wire cutter are covered with flexible and anti-slip PVC material, which adds friction and offers a more comfortable grip. PLEASE NOTE: PVC dipped handles are not insu....
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • 【Precision Cutting】 - The 2 inch metal pipe cutter tool is equipped with sharp SKD cutter wheels and 6 high-density ball bearing rollers to ensure a firm grip on pipe during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
  • 【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
  • 【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
  • 【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfor....
Check Stock

Industrial Service Solutions Aftermarket Quincy 128598 Spin-On Oil Filter | Replacement Part | Compressor Lube Filter | for Compressed Air Equipment and Systems

  • OPTIMIZES THE FUNCTION OF AIR COMPRESSORS - This filter removes contaminants and damaging residues from engine oil to keep your machine working efficiently. Works like the original part and maintains a high level of performance throughout its life..
  • COMPATIBLE WITH DIFFERENT EQUIPMENT - The 128598 Oil Filter is compatible with various compressed air filters and systems. Engineered with a micron rating of around 10 to 20 microns to match the specifications of your equipment..
  • HIGH-GRADE CONSTRUCTION BUILT TO LAST - Manufactured from synthetic, paper, metal mesh, or cloth, our oil filter replacement features a heavy-duty construction that stands up to the toughest conditions and most challenging operating environments..
  • COMES WITH MANUFACTURER'S WARRANTY - Our Oil Filter replacements come with manufacturer's warranty that matches or exceeds the original OEM warranty and specifications to let you get the most out of your purchase..
  • RELIABLE SOLUTIONS IN DEMANDING APPLICATIONS - Our innovative products provide a more cost-effective solution than brand name parts to increase productivity and efficiency across industries, helping our customers be successful in what they do..
Check Stock

Industrial Service Solutions Aftermarket Quincy 6211472550 Spin-On Oil Filter | Replacement Part | Compressor Lube Filter | for Compressed Air Equipment and Systems

  • OPTIMIZES THE FUNCTION OF AIR COMPRESSORS - This filter removes contaminants and damaging residues from engine oil to keep your machine working efficiently. Works like the original part and maintains a high level of performance throughout its life..
  • COMPATIBLE WITH DIFFERENT EQUIPMENT - The 6211472550 Oil Filter is compatible with various compressed air filters and systems. Engineered with a micron rating of around 10 to 20 microns to match the specifications of your equipment..
  • HIGH-GRADE CONSTRUCTION BUILT TO LAST - Manufactured from synthetic, paper, metal mesh, or cloth, our oil filter replacement features a heavy-duty construction that stands up to the toughest conditions and most challenging operating environments..
  • COMES WITH MANUFACTURER'S WARRANTY - Our Oil Filter replacements come with manufacturer's warranty that matches or exceeds the original OEM warranty and specifications to let you get the most out of your purchase..
  • RELIABLE SOLUTIONS IN DEMANDING APPLICATIONS - Our innovative products provide a more cost-effective solution than brand name parts to increase productivity and efficiency across industries, helping our customers be successful in what they do..
Check Stock