Categories

Best Heavy duty Motors

Hippies in the Park

  • 8.0 Peak HP, 58,500 ft./min. air flow, 2 motors, 2 stage dual fan, 2 speeds, 18 amps, 2,160-Watt, weighs 16-Pound.
  • Includes heavy duty neoprene blower nozzle plus 5 interchangeable attachments, 10-Feet by 1.5-Inch flexible commercial strength hose, 12-Feet heavy duty, 3 conductor cord, easy change foam filter.
Check Stock

DotLine Adjustable Outboard Motor Tilter

  • Assists in tilting the motor back with less strain.
  • Heavy-duty stainless steel arm adjusts to fit shrouds of any motor up to 75 hp with handholds at the TOP of the shroud.
  • Cast aluminum body and legs with protective cushions and hand grips.
  • Will not work on motors with handholds that are not at the top of the shroud or are not flat.
Check Stock

GM TRUCK CAR VEHICLE DOOR SPRING COMPRESSOR HINGE PIN REMOVER REMOVAL

  • This handy door spring tool safely removes and installs door springs from most General Motors cars and trucks..
  • The door spring tool is made of heavy duty steel and can be used with a 1/2” wrench..
  • A handy tool for any car enthusiast or automotive specialist..
  • Can be used with a 1/2" wrench..Heavy duty steel.
Check Stock

PANTHER MARINE O/B Motor Bracket SS 15HP MAX

  • Works with 4-stroke motors up to 15 HP or 2-stroke motors up to 20 HP with a maximum weight of 132 lbs..
  • Twist-knob safety locks provide increased torque rating while helping secure the bracket in place.
  • Built extra tough and extra wide for heavier 4-stroke engines.
  • Heavy-duty stainless steel torsion springs for easy lifting.
  • 4-position lock bar and 11" of travel allows for a better range of trim adjustments.
Check Stock

Solstice Motor Mount for Voyager and Outdoorsman Inflatable Boats

  • VERSATILE CONSTRUCTION: This motor mount assembly is compatible with Solstice Voyager & Outdoorsman inflatable boats (Model #s 30400 30401 30800 31400 31600).
  • MOTOR STRENGTH: The Solstice motor mount can accommodate electric or gas motors rated up to 2.5HP.
  • QUICK INSTALLATION: Simple design makes assembly and installation quick and easy so you can focus on time on the water.
  • HEAVY DUTY CONSTRUCTION: Stainless steel mounting hardware couples with heavy-duty ABS transom plate make for a durable motor mount built to last.
Check Stock

Volvo RC Excavator 3 in 1 Construction Truck Metal Shovel and Drill 17 Channel 1/16 Scale Full Functional with 2 Bonus Tools Hydraulic Electric Remote Control Excavator Construction Tractor Black

  • [ 3 IN 1 RC Excavator ] Shovel, Jack Hammer and Grab Jaw 3 IN 1 DOUBLE E Professional Heavy Duty Excavator Toy is the most realistic replica of an....
  • [ 3 SEPARATE MOTORS ON DIGGING ARM] The E 17 channel construction truck can really dig in any direction with the 3 powerful separate motors on its....
  • [ DETAILED AND REALISTIC ] The E Professional Heavy Duty Excavator Toy is the most realistic replica of an excavator construction tractor. Built on a....
  • [ 100 FEET CONTROL DISTANCE ] The Construction toy excavator is equipped with a powerful 2.4ghz transmitter which enables you to operate at a distance....
  • [ READY TO RUN ] The E excavator comes in a exquisite package box which is best choice as Birthday&Christmas gift, includes everything you need! The....
Check Stock

Five Oceans FO4205 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, Black Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches black poly mounting board for the new wider style motor locking clamps Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke motors. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new 4 strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary motors with ease.
Check Stock

ISURE MARINE Stainless Steel Boat Outboard Motor Brackets Kicker 7.5-20HP Heavy Duty AdjustableTrolling Yacht

  • Suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 52kg (115lbs).
  • Solid polypropylene mounting board. Easy to lift and lower - heavy duty springs help counterbalance motor weight.
  • Heavy duty, lightweight marine grade anodised aluminium frame, stainless steel springs.
  • Perfect for small to medium sized powerboats and yachts Spring loaded (5 vertical position) adjustable bracket, Wide track body for added stability.
Check Stock

SAILFLO Boat Marine Shower Sump Pump Drain Kit System - 12v - 750 GPH - Multi-Port Inlet

  • All-in-one pump & switch – No float switch required.
  • Pump turns on when water level rises & shuts off when water is removed.
  • Water cooled motors for long life, with anti airlock design and moisture tight seals. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • Output: 750 gallons/hour, Max. recommended discharge head 3.0m..
Check Stock

CTEK 4269 CTEK Battery Charger Comfort Indicator Pigtail Adaptor

  • Standard sae quick release connection - Fit for most of sae port.Suitable for creating weatherproof bulkhead/panel mounted SAE power points.NOTE:The....
  • The cable is made of heavy duty 10AWG wire. Heavy duty, Thickness, and Durable..
  • Overall Length:60cm(Inculuding sae connetor),Cable Length:55cm(Not including sae connector).Mounting hole diameter：φ21.7mm..
  • Quick connect and disconnect. The sae connector with connector cap protects the sae connector from rain and dust, and the inside of the sae connector....
  • Wide Rang of Application in solar panel, motorcycle, lawn motors, tractor battery, bike,rvs, vehicles,etc.Package including: SAE cable with 4 mounting....
Check Stock

Rock Crusher Gas Powered 6.5Hp-Gold Ore-14 Drum 3' Infeed-Rockwell #58 Hammers-100-200 Mesh-Quartz-Caliche-Hardest Chain Available-Portable-Glass-Prospecting-Testing-Pilot-Mill

  • Your new K&M Krusher features a 14" Drum with a 3" Infeed Tube.
  • Comes with a 6.5 Carroll Stream Gas Motor This motor IS NOT California EPA complaint for small motors, do not purchase this rock crusher motor if shipping is to CA. See our other Gas crushers for CA Complaint motors..
  • Heavy duty construction Turns rock into a talcum power like dust 100-200 Mesh 200-1000 Lbs per hour.
  • This motor IS NOT California EPA complaint for small motors, do not purchase this rock crusher motor if shipping is to CA. See our other Gas crushers for CA Complaint motors..
Check Stock

Top Race 15 Channel Full Functional Remote Control Excavator Construction Tractor - Remote Excavator Toy with 2.4Ghz Transmitter and Metal Shovel - Remote Controlled Excavator Mini Excavator

  • INTERCHANGABLE METAL SHOVEL/GRAPPLE: The Top Race Excavator Professional Heavy Duty Toy Model (TR-215/211) is the most realistic replica of an excavator construction tractor. The construction tractor comes with interchangeable metal shovel for digging and a grapple fork for grabbing and lifting. Built on a 1:14 Scale and its powerful motors, and the heavy rubber track tires. The size of the construction truck is 16" long, 9" Tall, and 7" wide.
  • 3 SEPARATE MOTORS ON DIGGING ARM: This Top Race Rc Construction Vehicles is not a small kids toy, it can really dig (or grab with the interchangeable grapple fork) in any direction with the 3 powerful separate motors on its digging arm.
  • 100 FEET CONTROL DISTANCE: The Construction toy tractor is equipped with a powerful 2.4ghz transmitter which enables you to operate at a distance of at least 100 feet or more..
  • A COLLECTIVE HIGH QUALITY PIECE: The RC excavator tractor not only looks like a real excavator, but it is also as durable as a real excavator..
  • Great Gift - This is a perfect gift to offer to your loved ones!.
Check Stock

Red and Tacky Lithium Grease Pail | Wheel Bearing | High Temp | Axle | Automotive | 5th Wheel | Tractor | Trailer Hitch | Ball Joint | Marine | Motorcycle | Hinges | 35 LB Bucket | NLGI 2 | HeavyDuty

  • Lithium complex grease designed for heavy duty applications.
  • Excellent grease for agriculture equipment, powersports equipment, automotive grease lube points, ball joints, bushings, chassis lubrication, electric motors, gears, plain bearings, presses, roller bearings, tie-rod ends, steering knuckles, trailers, hitch ball, universal joints, wheel bearings, winches.
  • HeavyDuty grease is a popular choice for multi-purpose applications in the construction, minining, hauling and trucking sectors due to it’s enhanced heavy duty performance properties.
  • Superior performance for fifth-wheel hitch plates, heavy-duty over-the-road trucks and trailers, king pins, municipal service vehicles, pivot pins, refuse haulers, sewer and septic trucks, snow removal vehicles, spring pins, steering linkages, universal joints, utility fleets, water pump bearings and other greased heavy-duty components, wheel bearings, demolition equipment, airport support vehicles and more..
  • Exceptional performance in heavily loaded chassis grease points, axle assemblies, ball joints, cement mixer trucks, delivery fleets, dump trucks, emergency service vehicles, equipment haulers.
Check Stock