Categories

Best Heavy duty Tap And Drill

Hankun Furniture Levelers- Adjustable Heavy Duty Leveling Legs, Protect Cabinets Sofa Tables Chairs Raise Feet Supprort, Black T- Nut Kit, 8 Pcs

  • Excellent quality: Set of 4-1-1/2" leveling feet heavy duty with T-nuts 5/16-18 thread. Allows you to easily move your furniture.
  • Universal design: Our adjustable furniture leveler can be placed on tables, chairs, cabinets, and shelves. Whether it is indoors, terraces, gardens, as long as your furniture needs help to level it, our adjustable furniture leg straighteners can quickly solve it, while keeping it stable and not affecting the appearance.
  • Easy to install: Use a 3/8 or 7/16" drill bit to drill a hole 30.48 mm/1.2 inch deep, use a hammer to tap the plug-in T-nut and screw the straightener to the correct position. The heavy duty leveling feet includes a lock nut to lock and stabilize the straightener.
  • Flexible adjustment: Easily level your chair and table. Easy to use on new furniture, very suitable as a replacement part for old furniture.
  • Suitable for all floors: Universal bottom suitable for all floors, such as hardwood/tile/carpet floors. Protect the floor from scratches or harsh noises.
Check Stock

10 Gauge Power Extension Cord Heavy Duty Indoor/Outdoor 10 3 Extension Cord 50 ft 10/3 Triple Outlet 3 Prong with Lighted Ends Power Your Major Appliances 1875 watt (50 ft Triple Tap, Green)

  • 50 Feet 3 Outlet Extension Cord 50 ft 10 Gauge Heavy Duty Indoor Outdoor SJTW Lighted Triple Outlet Extension Cord Can Handle Heavy Duty Appliances, such as Power Tools, Snow Equipment,air conditioner, Lawn Mowers, De-Icing Equipment, Centrifugal Fans, Grow Lights, etc Flexibility in Below Freezing Cold Temperatures 10 gauge extension cord 50 ft jacket 10/3 extension cord drop cords heavy duty 50 ft 10 awg extension cord.
  • 10 3 TRIPLE OUTLET extension cords LED Lighted Multi-Tap Design Lets You Use Up to 3 Appliances/Tools at The Same Time. Extension Cord With Triple, Heavy duty 10 Gauge. High visibility neon colors for recognition. Flame resistant. Heavy duty outdoor jacket that is water resistant for added protection against moisture. Heavy-duty molded on 15A-125V plugs and connectors.1875 watt.
  • 50 FT 10/3 Outdoor Extension Cord Triple Outlet 10 Gauge SJTW ,3 Conductor Triple Tap Extension Cord With Lighted Ends Jacket Lighted End UL Listed Heavy duty 10 Gauge.heavy duty 10 gauge extension cord High visibility neon colors for recognition. Flame resistant. drop cords heavy duty 50 ft.
  • 10 3 extension cord 50ft extension cord outdoor 15 amp extension cord 50 feet extension cord 10-gauge extra-heavy-duty extension cords heavy duty extension cords 10 gauge ....
Check Stock

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble..
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
  • you can use the in aluminum, plastic, and so on.
  • Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using th....
Check Stock

TEMO 5 pc Heavy Duty Screw Extractor Kit Damage Broken Bolt Removal Tool Set

  • 5pc heavy duty extractors to remove damaged screw or bolt. Extractors are made of high carbon alloy tempered steel. Hardend for long life..
  • SIZES: #1, #2, #3, #4, & #5. EXTRACT A WIDE VARIETY OF SCREWS FROM 1/8" (3.175mm)-3/4" (19.05mm) IN WIDTH.
  • VERY EASY TO USE. REVERSE THREAD LOCKS ON AND BACKS OUT BROKEN STUDS.
  • Plastic storage case included. | Direction: STEP 1. PRE-DRILL THE CENTER OF THE BROKEN BOLT. STEP 2. INSERT SCREW EXTRACTOR. STEP 3. WHILE APPLYING DOWNWARD PRESSURE TURN EXTRACTOR LEFT WITH A TAP WRENCH, IF YOU DON'T HAVE A TAP WRENCH, A STANDARD VISE-GRIP CHANNEL LOCK WILL ALSO WORK..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

10 Gauge Triple Tap Extension Cord with Lighted Ends Contractor Grade 100' 10 Gauge Power Extension Cord 10/3 Plug Heavy Duty Indoor Outdoor Triple Outlet (100 ft 10 AWG 100% Copper, red)

  • 10 GAUGE 3-wire ground Contractor Grade 100' 10 Gauge Power Extension Cord 10/3 Plug (100 ft Triple Tap, red) heavy duty 100 foot outdoor extension cord jacket 10/3 extension cord Multi Outlet Grounded 10/3 Extension Cord drop cords 100 ft 10 awg extension cord.
  • 100 foot extension cord 10/3 100 ft indoor extension cord 100 feet 10 Gauge 10/3 Extension Cord plug and connectors prevent ends from pulling away from cord body.
  • 10 3 extension cord Rated up to 1875 Watts 10 gauge extension cord triple outlet 10-3 extension cord 10 gauge cord 100 ft outdoor heavy duty extension cord.
  • 10 Gauge Power Extension Cord 10/3 Plug outdoor extension wire jacket WATER RESISTANT - Flexible vinyl covering protects cords against moisture Flexibility in Below Freezing Cold.
  • 10/3 Triple Tap Extension Cord 100 ft drop cords heavy duty 100 ft TRIPLE OUTLET: LED Lighted Multi-Tap Design Lets You Use Up to 3 Heavy Duty Appliances/Tools at The Same Time Rated up to 1875 Watts 125VAC 15amps This extension cord is suitable for heavy duty tools such as chain saws, circular saws, shop vacs & Air Compressors,3 Conductor Triple Tap Extension Cord With Lighted Ends (100 ft, red).
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64' Drill Combo Pack

  • Tap and drill Combo pack offers correct drill size for the tap in one convenient package.
  • Tap offers precision cut threads, accurately formed for consistent, exact threading.
  • Tap is heat treated and tempered for file hard threads, and longer, useful life.
  • Tap designed for hand cutting applications.
  • Drill bit made of premium grade high speed steel.
Check Stock