Categories

Best Heavy duty Trailer U bolt

Swagman 2-Bike RV Bumper Rack

  • Transports 1 to 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike).
  • Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
  • Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion.
  • Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while....
  • Simple to use and supports various bike sizes, frames and wheels.
Check Stock

Swagman RV Approved 4-Bike Bumper Rack

  • Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike).
  • Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
  • Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion.
  • Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while....
  • Simple to use and supports various bike sizes, frames and wheels.
Check Stock

Armored Personnel Carrier

  • Tire Fit: This U-bolt type spare tire bracket is suitable for trailer-fitted trailer frames up to 2 inches or 3-4/5 inches wide (up to 4 inches) and can accommodate 15-inch tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
  • Easy to install: This spare tire mount can be easily installed to secure the tire. Just put the bolt in the trailer's throat and tighten it. The spare tire is installed on the side of the trailer protector..
  • Upgrade double nut design: Prevent the nut from falling off, and don't worry about losing the tire on the road..
  • Durable and rustproof：Our U-bolt trailer spare tire mount is made of thick steel. Can resist deformation. Galvanizing can increase protection against harsh weather conditions.
  • Package：Provide U bolt and 4 lug nuts are supplied.
Check Stock

Discount Ramps RV or Camper Trailer Bumper Bike Rack for 1-2 Bicycles

  • Transports 1-2 bicycles on an RV or camper trailer bumper (max 60 lb. capacity).
  • Designed for 4″ to 4.5″ square RV bumpers, installs with (2) 6.5″ U-bolts around the RV bumper.
  • 1.75″W Tire wells with 6.5″ spacing between wells, 4.5″ from bolt to first well.
  • Single L-style support tie-down 19.5″H brace (bicycle tie-downs sold separately).
  • Heavy duty steel construction with a black paint finish.
Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

  • 【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
  • 【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
  • 【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
  • 【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..
Check Stock

CZC AUTO Hitch Tightener, Heavy Duty Anti-Rattle Stabilizer for 1.25\ and 2\ Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free (1 Pack, Carbon Steel)

  • CZC AUTO hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
  • Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
  • This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
  • Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
  • New arrival with very good price for only 1 month. Do not miss this price in hesitation. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you..
Check Stock

osemar U Bolts for Boat Trailer Axle Leaf Springs Galvanized, 2 1/8\W x 4 3/4\L

  • Boat Trailer U-Bolt KIT is made of heavy-duty steel with a thickness of 1/2.
Check Stock

RETRUE Hitch Tightener, Hitch Stabilizer Heavy Duty Anti-Rattle Clamp for 1.25" and 2" Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free

  • ...hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
  • Practical and Functional. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
  • Utility Use. This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
  • Hitch Tightener Installation. After insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
  • From RETRUE your reliable partner, model HT001. If you encounter any problems, please feel free to contact us through the "Ask a Question" button. We are alwa....
Check Stock

Semi Truck Spare Tire (or Tire and Rim) Carrier, Adjustable, Powder Coated, Universal Fit, STAR Fabrication, 3510,

  • Trailer U-Bolt Spare Tire Holder Bracket made of grade 8.8 steel, Zinc Plated, beautiful and practical..
  • U-Bolt Length: 8-1/2'', Width:3-1/4'' - 3-3/4'', Thread Diameter: 7/16-20 UNF, Thread Length: 3''. Fits trailer frames up to 2" or 3" wide.
  • For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2). Thread diameter 7/16-20 UNF..
  • Put bolt around trailer throat and tighten.Tire is mounted along side of trailer protect..
  • The device is very basic, but it fit perfectly around the trailer throat, and also on the tire rim.This carrier easily installs to secure your tires..
  • The kit provides the u-bolt and two nuts. Thread diameter 7/16-20 UNF. Note: Please confirm your tire size..
Check Stock

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

Qualward Hitch Tightener Anti-Rattle Clamp, Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches 304 Stainless Steel Towing Hitch Mounts,Anti-Rust Double Coating Protective

  • Eliminates Hitch Wobble & Rattle Noise: Anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc. Enjoy your quiet towing experience..
  • Universal Compatibility: Great ideal for hitches on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch)..
  • Upgraded Material: Made from solid steel, it is a pretty good quality tightener with upgraded extra-thick U-bolt and plate. It is designed to reduce noise and keep things locked tight for however far you have to travel even in tough weather conditions. You can expect this to be really tough right out of the gate..
  • Package including: A heavy duty 304 stainless steel U-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure..
  • Easy Installation: First and foremost, you are going to need the following tools: ¾” socket or wrench, U-bolt, tightener plate, washers, lock rings, and nuts. Then，drop the U-Bolt over the stinger and position the tightener plate onto the U-Bolt. Next, pla....
Check Stock

Sturdy Built (4) 8\ Galvanized Swivel Top Bunk Bracket Kit with Hardware for 2x3 Boat Trailer Crossmember

  • Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers.
  • Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops.
  • The Included U Bolts fit around a 2 inch wide by 3 inch tall cross member. The U Bolts measure 1/2" in diameter, 3" wide, by 3 5/16" long..
  • This Swivel Top style bunk bracket is the industry standard 8" height with slotted holes for multiple height adjustments.
  • The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull.
Check Stock

Sturdy Built (4) 8' Galvanized Swivel Top Bunk Bracket Kit with Hardware for 3x3 Boat Trailer Crossmember

  • Heavy duty 11 gauge galvanized bracket construction. Ideal for freshwater and saltwater boat trailers.
  • Complete Kit: Includes galvanized and zinc plated mounting hardware as pictured. This kit is put together to be ready to assemble out of the box on your trailer cross members and secure your bunk boards to the swiveling tops.
  • The Included U Bolts fit around a 3 inch wide by 3 inch tall cross member. The U Bolts measure 1/2" in diameter, 3" wide, by 4 5/16" long..
  • This Swivel Top style bunk bracket is the industry standard 8" height with slotted holes for multiple height adjustments.
  • The adjustable top bracket on this style bolster support allows you to align the angle to contour to your boats hull.
Check Stock