Categories

Best Height Depth Thickness Gauge

0-150mm Digital Display Height Gauge High Precision Depth Aperture INC/ABS with Magnetic Self Standing Feet

  • WELL RESISTANCE&DURABLE: This height gauge is made from engineering plastic, this height gauge is durable and has a long service life..
  • MAGNETIC SELF STANDING FEET: Designed with magnetic standing feet so it would firmly hold onto ferromagnetic surfaces, more convenient..
  • MEASURING HEIGHT AND DEPTH: This is a dual-purpose gauge, can be used for measuring object height and also aperture depth, 2 in 1 tool..
  • SEVERAL UNITS BY DIGITAL DISPLAY: This gauge supports mm, inch and fraction inch unit that will meet you different unit requirements. Digital display for easy reading..
  • CONVENIENT SWITCH: Takes with reset button for zeroing for relative measuring,which can be used to set the height of saw blades in woodwork..
Check Stock

Baroque String Action Gauge Precise Guitar Ruler Set Up Tool Kit for Electric Bass and Acoustic Guitar

  • Multifunctional -An all in one tool for measuring string height, bridge saddle height, saddle slot depth, fret slot depth and nut height. It is a neat and helpful tool for a guitar player to fix your guitar's play-ability by getting the height of your bridge and strings just right..
  • Super precise string action gauge-Scale for string height: 0.01-0.14in / 0.25-3.50mm.Scale for bridge saddle slot depth: 0-0.875in / 0-20mm.Scale for nuts saddles and polepiece: 0-0.75in / 0-20mm..
  • It is made of high strength stainless steel, very durable.All the markings are actually ETCHED into the ruler so it will not wear off from long time use..
  • With recommended measurements for electric, acoustic and bass guitar at the 12th fret printed on the back of the gauge,very clearly to read..
  • It have inches and metric on the same gauge.Pocket size just like a business card..
Check Stock

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.
Check Stock

NEW QEP ROBERTS 10-56 ELECTRIC 6" LONGNECK JAMB SAW KIT WITH CASE

  • Adjustable cut height from flush to 1" above floor level.
  • Dual-angle depth gauge allows cutting at "straight on" or 45° angles to the wall.
  • Visual depth gauge scale provides precision depth control at 1/8" increments.
Check Stock

TIG Welder, Diversion 180, 120-240VAC

  • Price For: Each Series: Diversion 180 Aluminum – Material Thickness: 0.025″ to 3/16″ Mild Steel – Material Thickness: 0.030″ to 3/16″ Includes: 12.5ft. Torch with Backcap, Ceramic Gas Cup, 3/32in Collet and Collet Body, 2% Ceriated Tungsten, RFCS-RJ45 Remote Foot Control, 12ft. Work Lead With Clamp, Regulator/Flow Gauge with Hose Overall Width: 9.875″ Overall Height: 17″ Welder Duty Cycle: 35%.
  • Power Source Weight: 50 lb. Welder Min. Output Amps: 10 Features: Inverter-Based, AC/DC Power Source, Fan-On-Demand, Portable Uses Miller’s MVP(TM) Plug for Multi-Voltage Usage, Digital Display, Remote Amperage Foot Control Included Input Voltage: 120/240VAC Polarity: AC/DC Welded Material: Aluminum, Steel Welding Processes: TIG.
  • Application: Aerospace, Construction, Heavy Equipment Manufacturing, Infrastructure, Manufacturing, Railcar, Shipbuilding, Boat / Yacht, High Purity Processing Input (Amps): 11.3/16 Rated Output: 60A @ 12.4V/150A @ 16V Welder Input Phase: 1 Welder Input Hz: 50/60 Item: TIG Welder Overall Depth: 23.875″ Welder Industrial Class: Light Welder Max. Output Amps: 180 Country of Origin (subject to change): United States.
Check Stock

Jiayouy Set of 12 Pieces Luthier Tools Set Guitar Neck Notched Straight Edge 9pcs Guitar Radius Gauge String Action Gauge Ruler Fret Rocker for Guitar and Bass Setup Tool

  • Guitar maintain and repair set: you will get 9 Understring Radius Gauge 1 piece guitar neck notched string measurement ruler 1 piece string action ruler and 1 fret rocker string height gauge, different tools can satisfy your needs easily..
  • The guitar measuring tools are made of stainless steel with smooth edges that have no burrs, anti-rust and scratch-prevent, durable to serve your guitar for a long term..
  • Guitar Neck Notched Straight Edge Designed to check guitar neck straightness of the fretboard and frets, the fret rocker can span over 3 frets and can check if frets are on the same level, works well with most guitar..
  • String action gauge ruler: comes in 8.9 x 5.1 cm/ 3.5 x 2 inch, Pocket-size body, you can take it anywhere. measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
  • 9 Understring Radius Gauge including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius can be applied to measure fret board radius, saddle radius, nut radius from either the top or the bottom radius surface..
Check Stock

Uiegurit Guitar Neck Notched Straight Edge Luthiers Tool with String Action Ruler Guitar Radius Gauge for Guitars Neck Leveling

  • GUITAR LUTHIER TOOL: Include guitar straight edge, string action ruler and radius gauge, great for guitar technicians and guitarists to maintain and repair their instrument themselves in a short time, reducing buzzing.
  • NECK CHECK GUITAR TOOLS: Dual scale design, designed to check guitar neck straightness of the fretboard and frets, the fret rocker can span over 3 frets and can check if frets are on the same level, works well with most guitar.
  • GUITAR RADIUS GAUGE: Stainless steel material, set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, luthier tools for Guitar and Bass Setup.
  • GUITAR ACTION GAUGE: Etch printing on double sides, metric & imperial, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height.
  • THE INSTRUCTIONS OF NOTCHED STRAIGHTEDGE: By sliding the notched grooves of the straight edge until they all set flat against guitar frets, you can see if your guitar neck is straight or needs adjustment.
Check Stock

GemRed Digital Depth Gauge , Height Gauge with LCD Display, Woodworking Tool for Router Table (Black&Red)

  • 【Accurate Data】 The GemRed Depth Gauge applies Absolute Depth Sensor , to ensure the accuracy of data up to 0.1mm/0.004’’, resolution is 0.05mm/0.002’’. ☆Measure range:0~80mm (0~3 1/8" ).
  • 【Locking Function &Magnetic】 The Locking screw can help to lock the ruler to maintain the measurement. With free standing magnetic feet, vertical measurement of Height Gauge is more accurate..
  • 【inches/millimeters】The measured values can also be converted between inches and millimeters to meet the user's various habits..
  • 【Large LCD Display】 Quickly and Clearly read horizontally and vertically. Applicable to manual router and router table..
  • 【Muti-Function】 3 in1-Height measurement/ Plunger-hole / Slot depth measurement. POINTER: On one of the legs and can be clipped to the ruler to accurately check any holes, mortices, or slots up to 50.8mm deep..
Check Stock

YESWELDER V-WAC Single Weld Gage Inch Inspection Gauge

  • Widely used to check undercut depth, porosity comparison, amount of porosity per linear Widely used to check undercut depth, porosity comparison, amount of porosity per linear metric and crown heightand crown height.
  • Accurate figures and increments are etched into surface.
  • Porosity comparison of 1/8 inch and 1/16 inch.
  • Undercut depth or crown height scale can be read to 1/32 inch.
Check Stock

Eastwood Deep Metal Hand Punch Throat Portable Sheet Rivet Hole Auto Body Tool Adjustable Work Stop

  • This 17 Piece Heavy Duty Power Punch Kit Provides Over 2400 Pounds Of Punching Power For Accurate Holes (1.2 Ton Max. Pressure).
  • Mild Steel Max. Material Thickness: 1/8 in. Up To 16 Gauge, 3/16 in. And 1/4 in. Up To 18 Gauge, 5/16 And 3/8 in. Up To 20 Gauge, 7/16 in. Up To 22 Gauge.
  • Works With Up To 16 Gauge Steel Aluminum And Brass.
  • 3.25 in. Inch Throat Depth With 5/8 in. Inch Jaw Opening.
  • Punches Between 1/8 in. Inch To 7/16 in. Inch.
Check Stock

Titan Attachments 72-in Fine Grade Rock Grapple Skeleton Rake with Teeth, Universal Skid Steer Quick Tach

  • ... REPLACEABLE TEETH: This attachment features teeth that can easily be replaced. Fortunately, you do not need to replace the entire system because of a single worn tooth..
  • SKELETON FRAME: The bucket is constructed using 0.5-inch grade 50 structural steel. The sidewall thickness is 0.5-inches thick, providing plenty of support. At the top of the frame, we have added a 3 x 3-inch 9-gauge tubular steel support which adds to the structural integrity other rock buckets do not have..
  • DIMENSIONS: Weighing 1,050-pounds, the Grapple Rake frame provides an overall width of 73-inches and a depth of 51.5-inches. The inside of the bucket features a 72-inch width x 38-inch depth. The tines of the grapple rake are spaced 3-inches apart with a thickness of 0.5-inches and the cutting edge is 1-inch thick..
Check Stock

Woodraphic Signature Professional Dual Function Scriber Gauge for Measuring and Marking - All in One Aluminum Steel Framing Tool for Professional Carpentry Use - 14 inch Imperial

  • ...r calipers which can mark up to 1/20 (0.05) mm which is about 0.019 inches..
  • ✔️ MULTI-FUNCTION (MEASUREMENT AND MARKING) - With one woodraphic caliper you can do 5 different things! From measuring 45 degrees, 90 degrees, depth, width to drawing lines. You can gauge the thickness and depth of the object just like any other vernier calipers but also you can check the angles with combined miter and t-square. You can mark the object by utilizing the main scale as a ruler. Experience easier measure and marking with woodraphic’s all in one caliper!.
  • ✔️ SOMETHING ABOUT VERSATILITY - Woodraphic’s measuring tool is absolutely versatile. You can insert a straight ruler and this will work as a vernier caliper. Woodraphic’s caliper comes with additional depth gauge accessory which is perfect for measuring items such as cylindrical rods, pipes and all kinds of angles. This depth gauge is also removable. You can fully customize the caliper with additional components based on the projects..
  • ✔️ EASY-TO-READ THERMAL - Each aluminum blade is precisely milled with state-of-the-art MCT equipment followed by sanding procedure ....
Check Stock

Kiene K-1390 Brake Lining Gauge

  • Quality: Made of premium plastic, not easy to fade, durable to use..
  • Range: Brake gauge sizes range from 2mm to 12mm..
  • Clear and Accurate Marks: Codes are clearly marked on the gauges, providing accurate depth readings..
  • Easy to take along: The gauges are small in size, you can take it in your car or toolbox, would not take up too much space..
  • Package Include: 1 x Brake Pad Thickness Gauge..
Check Stock