Categories

Best Height Encoder Gauge

CUI Inc AMT102-V AMT10X Series 3.6 to 5.5 V 2-8 mm Open Center Capacitive Encoder Switch Kit - 1 item(s)

  • [Specification]- Type: EC11 Encoder with Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 10pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Taiss / 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knobs Cap

  • The Material of Knob Cap: aluminium alloy；The Specification of Knob Cap: diameter: 15mm/ 0.59in.
  • The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • Package content: 5pcs x Rotary Encoder Module + 5pcs black Knob ..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 300RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ★The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • ★With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • ★The Material of Knob Cap: aluminium alloy；The Specification of Knob Cap: diameter: 15mm/ 0.59in.
  • ★Package content: 10pcs x Rotary Encoder Module，10pcs black Knob ..
Check Stock

Maxmoral 2pcs Rotary Encoder Module KY-040 360 Degrees for Arduino Compatible Brick Sensor Switch Development Board

  • The Material of Knob Cap: aluminium alloy.
  • The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • Package Content: 10 x Rotary Encoder Module, 5 x Black Knob, 5 x Silver Knob, 1 x 11.8" Female-Male Dupont Cables 50 PIN.
Check Stock

uxcell 25 Pcs Encoder Switch Mouse Encoder Scroll Wheel Repair Part Switch 5mm 7mm 9mm 11mm 13mm

  • The encoder can be commonly used as long as the encoder of your mouse have the same height with it.
  • The core is moderate in strength, high precision, accurate positioning, very comfortable feel, and suitable.
  • With a life span of 5 million times, it has reached the avarage standard. Currently, it is the leading domestic player, far exceeding the market's lifespan..
Check Stock

Cylewet 5Pcs KY-040 Rotary Encoder Module with 15×16.5 mm with Knob Cap for Arduino (Pack of 5) CYT1062

  • The rotary encoder can count the number of pulse output during rotation in the positive direction and reverse direction through the rotation and this rotation counts are not limited.
  • With the key on the rotary encoder, you can reset to the initial state, that is, counting from 0.
  • The Material of Knob Cap: aluminium alloy.
  • The Specification of Knob Cap: diameter: 15mm/ 0.59in.
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Assembled Finished Machine EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be....
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div....
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Power Adapter Assembled Finished Machine Q15001 White

  • ASSEMBLED FINISHED - ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can....
  • UPGRADED VERSION - The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others. It reaches....
  • HAND-HELD - This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET - You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED – ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can be used directly to avoid assembling/welding process problems and greatly save your time..
  • UPGRADED VERSION – The sensitivity of the EM001 has been extended both in width and height, which is wider and higher than the others. It reaches 5mV/div – 20V/div, while the others is only 10mV/div – 5v/div..
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and schematic are also provided..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Stinger SPXRNGDASH 13-18 Polaris Ranger Radio Mounting Kit and JBL PRV-275 Waterproof Radio

  • PRV-275 - Bluetooth Audio Streaming with ID Tagging - Enjoy a JBL experience wirelessly via Bluetooth and see what you are listening to!.
  • PRV-275 -Rotary Encoder - Easily control the volumes of your Bluetooth audio.
  • PRV-275 - AM/FM/WB - Have access to different radio signals for preferred audio.
  • SPXRNGDASH - Keep it clean. Integrates with factory dash panel for a clean OE appearance.
  • SPXRNGDASH - Secure mounting for today’s most popular 3” gauge style powersports media players keeps your radio flush.
Check Stock