Categories

Best Hex Coupling Disc Pack

American Standard AS738756-0070A Champion 4 Tank to Bowl Gasket, 1 pack, Black

  • BEST-IN-CLASS: The American Standard toilet bowl to toilet tank coupling kit ensures there are no surprise leaks with your toilet.
  • PERFORMANCE: American Standard toilet parts provide durability for bathrooms for years to come. With the Champion 2 coupling kit, expect reliable performance and durability.
  • COMPATIBILITY: Before you install, confirm compatibility by ensuring that your toilet will accept this toilet bowl to toilet tank coupling kit by checking repair part information.
  • FLAWLESS DESIGN: Designed to keep the toilet bowl and toilet tank connected with no leaks, this American Standard coupling kit is easy to install and is durably constructed.
  • INCLUDES: Coupling kit includes the toilet tank gasket, speed connect tank to bowl bolt kit with two 5/16 in. hex nuts, captive washers and speed connect bolts, two grommets, a Fluidmaster coupling nut, washer, and a close coupling washer.
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

  • 1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Zinc plate over steel - more rust resistant.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
Check Stock

Hard-to-Find Fastener 014973209582 Coupling Nuts, 6-32, Piece-8

  • 8 Pack 1/4-20 X 7/8" Long Hex Coupling Nut with Zinc Plate NCUP004C000STLZN.
Check Stock

The Hillman Group 45132 1/4-20-Inch Stainless Steel Coupling Nut, 8-Pack

  • 8 Pack 5/16-18 X 1-3/4" Long Hex Coupling Nut with Zinc Plate NCUP005C000STLZN.
Check Stock

8 Pack 5/16-18 X 1-3/4\ Long Hex Coupling Nut with Zinc Plate NCUP005C000STLZN

  • 8 Pack 10-24 X 3/4" Long Hex Coupling Nut with Zinc Plate NCUP#10C000STLZN.
Check Stock

Tshya Quick Change Disc Pad Holder, 4 Pack Roll Lock Disc Holder, with 1/4\ Shanks for Die Grinder Accessories

  • ✔ FIRST CHOICE - Tshya Disc pad holder includes a hard rubber pad, aluminum core with nickel-plated removable steel shank. 2 kinds of common sizes 2/3 inch roloc pad holders to meet your various grinding requirements..
  • ✔ TWO TYPES SHANKS - Quick change Disc Pad(TR/Type III) with 1/4" shanks, Round/Hex shank can use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control..
  • ✔ 4 PACK - 3Pcs 2 inch discs pad holders, 1Pcs 3 inch discs pad holder ,2 Pcs 1/4" round shanks, 2 Pcs 1/4" hex shanks..
  • ✔ EASY TO USE - The included 1/4'' shank allows operators to attach the assembly quickly and easily to common grinding tools, such as drills and air tools. All it takes is one simple turn and the disc is securely locked onto the mandrel..
  • ✔ FACTORY OUTLET - Factory mass standard production, Guaranteed quality..
Check Stock

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

Draft Warehouse Faucet And Hex Nut Wrench with Vinyl Coating - Heavy Duty

  • One side is a spanner wrench for hex nuts, other side is to tighten faucets to shanks or towers..
  • Fits any standard shank coupling nuts and beer hex nut..
Check Stock

Tshya 270Pack 2inch Sanding Discs Pad Variety Kit for Drill Grinder Rotary Tools Die Grinder Accessories with 1/8'&1/4' Shank Backer Plate, Sanding Pads Includes 36-3000 Grit

  • ✔ FIRST CHOICE - Premium 2" Variety Zirconia-Nylon Nonwoven-Strip-Wool die grinder sangding Discs(26Pcs) and Aluminum oxide hook loop discs (240Pcs),sanding with common grits (P36-3000) to meet your various polishing requirements..
  • ✔ TWO TYPES SHANKS - We have found all the connection methods for your project as far as possible. Roll Lock 1/4 inch(6.35mm) Round shank works better with pneumatic tools.
  • 1/4 inch Hex shank more suitable for electric tools..
  • ✔ THREE WAYS CONNECT - The Air-Tool Backer Plate with 1/8"&1/4" Shank can work with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control. You can even put the pad directly on a pneumatic tool without shank..
  • ✔ PERFECT FOR DIE GRINDER - A special soft PU Foam adapter Pad has been developed for this Kit, you can easily install the Hook Loop sandpaper on the Black Disc Pad Holder, so that your can do more with die grinder,Time is Money！.
  • ✔ 270 PACK – 240Pcs 2 inch H&L Sanding Discs (P80/120/180/240/320/400/600/800/1000/1500/2000/3000 each 20Pcs), 15 Pcs Zirconia roll lock discs (P36/60/80 each 5Pcs), 9 Pcs Non-woven discs, 1Pcs Strip disc, 1Pcs Wool disc, 1Pcs Air-Tool Backer Plate with 1/8"&1/4" Shank, 1Pcs Disc Pad with 1/4"Round/Hex Shanks, 1Pcs Soft....
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

WMYCONGCONG 5 PCS 37mm DC Geared Motor Mounting Bracket Holder + 5 PCS 6mm Hex Motor Coupling w/Screw

  • Hex Coupler Size: 18 x 12mm / 0.71 x 0.47".
  • Ellipse Hole Size: 27 x 13mm / 1.06 x 0.51"..
  • Bracket Size: 46 x 42 x 40mm/1.8 x 1.65 x 1.6"(L * W * H).
  • Effortless Installation: This metal motor holder has convenient holes for mounting..
  • Package Content: 5x DC 37mm Geared Motor Bracket + 5x 6mm Motor Coupling..
Check Stock

Wiha 77790 14 Piece Ultra Driver 26-in-1 Bit Holder Set

  • Set Includes: Slotted: 3.0x4.5, 5.5x6.5mm | Phillips: #1x2, #0x3 | Square: #1x2, #0x3 | Pozidriv: #1x2 | TORX: T10xT15, T20xT25 | Hex Inch: 1/8x9/64, 5/32x3/16” | Hex Metric: 3.0x4.0, 5.0x6.0mm.
  • Includes 13 double-ended insert bits for 26 driver tip profiles.
  • Spring driven pop up cartridge for fast bit selection.
  • Locking bit collar with quick release for secure bit coupling.
  • Ergonomic cushion grip handle for comfort and control.
Check Stock